refactor(eps): deactivate black for eps.py to keep signal component formatted in single line.

csaxs_bec/devices/epics/eps.py

@@ -1,5 +1,9 @@
 """EPS module for cSAXS beamline: defines the EPS device with its components and methods."""
 
+# fmt: off
+# Disable Black formatting for this file to preserve an easier readable structure for the component definitions.
+
+# pylint: disable=line-too-long
 from __future__ import annotations
 
 import time
@@ -30,553 +34,96 @@ class EPSSubDevices(Device):
 class EPSAlarms(EPSSubDevices):
     """EPS alarms at the cSAXS beamline."""
 
-    eps_alarm_cnt = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-EPS-PLC:AlarmCnt_EPS",
-        add_prefix=("",),
-        name="eps_alarm_cnt",
-        kind=Kind.omitted,
-        doc="X12SA EPS Alarm count",
-        auto_monitor=True,
-        labels={"alarm"},
-    )
-    mis_alarm_cnt = Cpt(
-        EpicsSignalRO,
-        read_pv="ARS00-MIS-PLC-01:AlarmCnt_Frontends",
-        add_prefix=("",),
-        name="mis_alarm_cnt",
-        kind=Kind.omitted,
-        doc="FrontEnd MIS Alarm count",
-        auto_monitor=True,
-        labels={"alarm"},
-    )
+    eps_alarm_cnt = Cpt(EpicsSignalRO, read_pv="X12SA-EPS-PLC:AlarmCnt_EPS", add_prefix=("",), name="eps_alarm_cnt", kind=Kind.omitted, doc="X12SA EPS Alarm count", auto_monitor=True, labels={"alarm"})
+    mis_alarm_cnt = Cpt(EpicsSignalRO, read_pv="ARS00-MIS-PLC-01:AlarmCnt_Frontends", add_prefix=("",), name="mis_alarm_cnt", kind=Kind.omitted, doc="FrontEnd MIS Alarm count", auto_monitor=True, labels={"alarm"})
 
 
 class ValvesFrontend(EPSSubDevices):
     """Valves frontend at the cSAXS beamline."""
 
-    ################
-    ### Frontend ###
-    ################
-    fe_vvpg_0000 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-FE-VVPG-0000:PLC_OPEN",
-        add_prefix=("",),
-        name="fevvpg0000",
-        kind=Kind.omitted,
-        doc="FE-VVPG-0000",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    fe_vvpg_1010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-FE-VVPG-1010:PLC_OPEN",
-        add_prefix=("",),
-        name="fevvpg1010",
-        kind=Kind.omitted,
-        doc="FE-VVPG-1010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    fe_vvfv_2010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-FE-VVFV-2010:PLC_OPEN",
-        add_prefix=("",),
-        name="fevvfv2010",
-        kind=Kind.omitted,
-        doc="FE-VVFV-2010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    fe_vvpg_2010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-FE-VVPG-2010:PLC_OPEN",
-        add_prefix=("",),
-        name="fevvpg2010",
-        kind=Kind.omitted,
-        doc="FE-VVPG-2010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-
-    ################
-    ### Optics ###
-    ################
 
+    fe_vvpg_0000 = Cpt(EpicsSignalRO, read_pv="X12SA-FE-VVPG-0000:PLC_OPEN", add_prefix=("",), name="fevvpg0000", kind=Kind.omitted, doc="FE-VVPG-0000", auto_monitor=True, labels={"valve"})
+    fe_vvpg_1010 = Cpt(EpicsSignalRO, read_pv="X12SA-FE-VVPG-1010:PLC_OPEN", add_prefix=("",), name="fevvpg1010", kind=Kind.omitted, doc="FE-VVPG-1010", auto_monitor=True, labels={"valve"})
+    fe_vvfv_2010 = Cpt(EpicsSignalRO, read_pv="X12SA-FE-VVFV-2010:PLC_OPEN", add_prefix=("",), name="fevvfv2010", kind=Kind.omitted, doc="FE-VVFV-2010", auto_monitor=True, labels={"valve"})
+    fe_vvpg_2010 = Cpt(EpicsSignalRO, read_pv="X12SA-FE-VVPG-2010:PLC_OPEN", add_prefix=("",), name="fevvpg2010", kind=Kind.omitted, doc="FE-VVPG-2010", auto_monitor=True, labels={"valve"})
 
 class ValvesOptics(EPSSubDevices):
     """Valves at the optics hutch."""
 
-    op_vvpg_1010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-1010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg1010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-1010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_2010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-2010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg2010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-2010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_3010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-3010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg3010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-3010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_3020 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-3020:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg3020",
-        kind=Kind.omitted,
-        doc="OP-VVPG-3020",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_4010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-4010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg4010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-4010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_5010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-5010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg5010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-5010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_6010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-6010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg6010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-6010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_vvpg_7010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-VVPG-7010:PLC_OPEN",
-        add_prefix=("",),
-        name="opvvpg7010",
-        kind=Kind.omitted,
-        doc="OP-VVPG-7010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-
-    ##################
-    ### Endstation ###
-    ##################
-
-
+    op_vvpg_1010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-1010:PLC_OPEN", add_prefix=("",), name="opvvpg1010", kind=Kind.omitted, doc="OP-VVPG-1010", auto_monitor=True, labels={"valve"})
+    op_vvpg_2010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-2010:PLC_OPEN", add_prefix=("",), name="opvvpg2010", kind=Kind.omitted, doc="OP-VVPG-2010", auto_monitor=True, labels={"valve"})
+    op_vvpg_3010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-3010:PLC_OPEN", add_prefix=("",), name="opvvpg3010", kind=Kind.omitted, doc="OP-VVPG-3010", auto_monitor=True, labels={"valve"})
+    op_vvpg_3020 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-3020:PLC_OPEN", add_prefix=("",), name="opvvpg3020", kind=Kind.omitted, doc="OP-VVPG-3020", auto_monitor=True, labels={"valve"})
+    op_vvpg_4010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-4010:PLC_OPEN", add_prefix=("",), name="opvvpg4010", kind=Kind.omitted, doc="OP-VVPG-4010", auto_monitor=True, labels={"valve"})
+    op_vvpg_5010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-5010:PLC_OPEN", add_prefix=("",), name="opvvpg5010", kind=Kind.omitted, doc="OP-VVPG-5010", auto_monitor=True, labels={"valve"})
+    op_vvpg_6010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-6010:PLC_OPEN", add_prefix=("",), name="opvvpg6010", kind=Kind.omitted, doc="OP-VVPG-6010", auto_monitor=True, labels={"valve"})
+    op_vvpg_7010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-VVPG-7010:PLC_OPEN", add_prefix=("",), name="opvvpg7010", kind=Kind.omitted, doc="OP-VVPG-7010", auto_monitor=True, labels={"valve"})
 class ValvesEndstation(EPSSubDevices):
     """Endstation valves at the cSAXS beamline."""
 
-    es_vvpg_1010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-ES-VVPG-1010:PLC_OPEN",
-        add_prefix=("",),
-        name="esvvpg1010",
-        kind=Kind.omitted,
-        doc="ES-VVPG-1010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-
+    es_vvpg_1010 = Cpt(EpicsSignalRO, read_pv="X12SA-ES-VVPG-1010:PLC_OPEN", add_prefix=("",), name="esvvpg1010", kind=Kind.omitted, doc="ES-VVPG-1010", auto_monitor=True, labels={"valve"})
 
 class ShuttersFrontend(EPSSubDevices):
     """Shutters frontend."""
 
-    fe_psh1 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-FE-PSH1-EMLS-0010:OPEN",
-        add_prefix=("",),
-        name="fepsh1",
-        kind=Kind.omitted,
-        doc="FE-PSH1-EMLS-0010",
-        auto_monitor=True,
-        labels={"shutter"},
-    )
-    fe_sto1 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-FE-STO1-EMLS-0010:OPEN",
-        add_prefix=("",),
-        name="festo1",
-        kind=Kind.omitted,
-        doc="FE-STO1-EMLS-0010",
-        auto_monitor=True,
-        labels={"shutter"},
-    )
-
+    fe_psh1 = Cpt(EpicsSignalRO, read_pv="X12SA-FE-PSH1-EMLS-0010:OPEN", add_prefix=("",), name="fepsh1", kind=Kind.omitted, doc="FE-PSH1-EMLS-0010", auto_monitor=True, labels={"shutter"})
+    fe_sto1 = Cpt(EpicsSignalRO, read_pv="X12SA-FE-STO1-EMLS-0010:OPEN", add_prefix=("",), name="festo1", kind=Kind.omitted, doc="FE-STO1-EMLS-0010", auto_monitor=True, labels={"shutter"})
 
 class ShuttersEndstation(EPSSubDevices):
     """Shutters at the endstation."""
 
-    es_psh17010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-PSH1-EMLS-7010:OPEN",
-        add_prefix=("",),
-        name="espsh17010",
-        kind=Kind.omitted,
-        doc="OP-PSH1-EMLS-7010",
-        auto_monitor=True,
-        labels={"shutter"},
-    )
-
+    es_psh17010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-PSH1-EMLS-7010:OPEN", add_prefix=("",), name="espsh17010", kind=Kind.omitted, doc="OP-PSH1-EMLS-7010", auto_monitor=True, labels={"shutter"})
 
 class DMMMonochromator(EPSSubDevices):
     """DMM monochromator signals at the cSAXS beamline."""
 
-    dmm_temp_surface_1 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-ETTC-3010:TEMP",
-        add_prefix=("",),
-        name="dmm_temp_surface_1",
-        kind=Kind.omitted,
-        doc="DMM Temp Surface 1",
-        auto_monitor=True,
-        labels={"temp"},
-    )
-    dmm_temp_surface_2 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-ETTC-3020:TEMP",
-        add_prefix=("",),
-        name="dmm_temp_surface_2",
-        kind=Kind.omitted,
-        doc="DMM Temp Surface 2",
-        auto_monitor=True,
-        labels={"temp"},
-    )
-    dmm_temp_shield_1_disaster = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-ETTC-3030:TEMP",
-        add_prefix=("",),
-        name="dmm_temp_shield_1_disaster",
-        kind=Kind.omitted,
-        doc="DMM Temp Shield 1 (disaster)",
-        auto_monitor=True,
-        labels={"temp"},
-    )
-    dmm_temp_shield_2_disaster = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-ETTC-3040:TEMP",
-        add_prefix=("",),
-        name="dmm_temp_shield_2_disaster",
-        kind=Kind.omitted,
-        doc="DMM Temp Shield 2 (disaster)",
-        auto_monitor=True,
-        labels={"temp"},
-    )
+    dmm_temp_surface_1 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-ETTC-3010:TEMP", add_prefix=("",), name="dmm_temp_surface_1", kind=Kind.omitted, doc="DMM Temp Surface 1", auto_monitor=True, labels={"temp"})
+    dmm_temp_surface_2 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-ETTC-3020:TEMP", add_prefix=("",), name="dmm_temp_surface_2", kind=Kind.omitted, doc="DMM Temp Surface 2", auto_monitor=True, labels={"temp"})
+    dmm_temp_shield_1_disaster = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-ETTC-3030:TEMP", add_prefix=("",), name="dmm_temp_shield_1_disaster", kind=Kind.omitted, doc="DMM Temp Shield 1 (disaster)", auto_monitor=True, labels={"temp"})
+    dmm_temp_shield_2_disaster = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-ETTC-3040:TEMP", add_prefix=("",), name="dmm_temp_shield_2_disaster", kind=Kind.omitted, doc="DMM Temp Shield 2 (disaster)", auto_monitor=True, labels={"temp"})
 
-    dmm_translation_thru = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMLS-3010:THRU",
-        add_prefix=("",),
-        name="dmm_translation_thru",
-        kind=Kind.omitted,
-        doc="DMM Translation ThruPos",
-        auto_monitor=True,
-        labels={"switch"},
-    )
-    dmm_translation_in = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMLS-3020:IN",
-        add_prefix=("",),
-        name="dmm_translation_in",
-        kind=Kind.omitted,
-        doc="DMM Translation InPos",
-        auto_monitor=True,
-        labels={"switch"},
-    )
-    dmm_bragg_thru = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMLS-3030:THRU",
-        add_prefix=("",),
-        name="dmm_bragg_thru",
-        kind=Kind.omitted,
-        doc="DMM Bragg ThruPos",
-        auto_monitor=True,
-        labels={"switch"},
-    )
-    dmm_bragg_in = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMLS-3040:IN",
-        add_prefix=("",),
-        name="dmm_bragg_in",
-        kind=Kind.omitted,
-        doc="DMM Bragg InPos",
-        auto_monitor=True,
-        labels={"switch"},
-    )
+    dmm_translation_thru = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMLS-3010:THRU", add_prefix=("",), name="dmm_translation_thru", kind=Kind.omitted, doc="DMM Translation ThruPos", auto_monitor=True, labels={"switch"})
+    dmm_translation_in = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMLS-3020:IN", add_prefix=("",), name="dmm_translation_in", kind=Kind.omitted, doc="DMM Translation InPos", auto_monitor=True, labels={"switch"})
+    dmm_bragg_thru = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMLS-3030:THRU", add_prefix=("",), name="dmm_bragg_thru", kind=Kind.omitted, doc="DMM Bragg ThruPos", auto_monitor=True, labels={"switch"})
+    dmm_bragg_in = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMLS-3040:IN", add_prefix=("",), name="dmm_bragg_in", kind=Kind.omitted, doc="DMM Bragg InPos", auto_monitor=True, labels={"switch"})
 
-    dmm_heater_fault_xtal_1 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMSW-3050:SWITCH",
-        add_prefix=("",),
-        name="dmm_heater_fault_xtal_1",
-        kind=Kind.omitted,
-        doc="DMM Heater Fault XTAL 1",
-        auto_monitor=True,
-        labels={"fault"},
-    )
-    dmm_heater_fault_xtal_2 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMSW-3060:SWITCH",
-        add_prefix=("",),
-        name="dmm_heater_fault_xtal_2",
-        kind=Kind.omitted,
-        doc="DMM Heater Fault XTAL 2",
-        auto_monitor=True,
-        labels={"fault"},
-    )
-    dmm_heater_fault_support_1 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM-EMSW-3070:SWITCH",
-        add_prefix=("",),
-        name="dmm_heater_fault_support_1",
-        kind=Kind.omitted,
-        doc="DMM Heater Fault Support 1",
-        auto_monitor=True,
-        labels={"fault"},
-    )
+    dmm_heater_fault_xtal_1 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMSW-3050:SWITCH", add_prefix=("",), name="dmm_heater_fault_xtal_1", kind=Kind.omitted, doc="DMM Heater Fault XTAL 1", auto_monitor=True, labels={"fault"})
+    dmm_heater_fault_xtal_2 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMSW-3060:SWITCH", add_prefix=("",), name="dmm_heater_fault_xtal_2", kind=Kind.omitted, doc="DMM Heater Fault XTAL 2", auto_monitor=True, labels={"fault"})
+    dmm_heater_fault_support_1 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM-EMSW-3070:SWITCH", add_prefix=("",), name="dmm_heater_fault_support_1", kind=Kind.omitted, doc="DMM Heater Fault Support 1", auto_monitor=True, labels={"fault"})
 
-    dmm_energy = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM1:ENERGY-GET",
-        add_prefix=("",),
-        name="dmm_energy",
-        kind=Kind.omitted,
-        doc="DMM Energy",
-        auto_monitor=True,
-        labels={"energy"},
-    )
-    dmm_position = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM1:POSITION",
-        add_prefix=("",),
-        name="dmm_position",
-        kind=Kind.omitted,
-        doc="DMM Position",
-        auto_monitor=True,
-        labels={"string"},
-    )
-    dmm_stripe = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-DMM1:STRIPE",
-        add_prefix=("",),
-        name="dmm_stripe",
-        kind=Kind.omitted,
-        doc="DMM Stripe",
-        auto_monitor=True,
-        labels={"string"},
-    )
+    dmm_energy = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM1:ENERGY-GET", add_prefix=("",), name="dmm_energy", kind=Kind.omitted, doc="DMM Energy", auto_monitor=True, labels={"energy"})
+    dmm_position = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM1:POSITION", add_prefix=("",), name="dmm_position", kind=Kind.omitted, doc="DMM Position", auto_monitor=True, labels={"string"})
+    dmm_stripe = Cpt(EpicsSignalRO, read_pv="X12SA-OP-DMM1:STRIPE", add_prefix=("",), name="dmm_stripe", kind=Kind.omitted, doc="DMM Stripe", auto_monitor=True, labels={"string"})
 
 
 class CCMMonochromator(EPSSubDevices):
     """CCM monochromator signals at the cSAXS beamline."""
 
-    ccm_temp_crystal = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM-ETTC-4010:TEMP",
-        add_prefix=("",),
-        name="ccm_temp_crystal",
-        kind=Kind.omitted,
-        doc="CCM Temp Crystal",
-        auto_monitor=True,
-        labels={"temp"},
-    )
-    ccm_temp_shield_disaster = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM-ETTC-4020:TEMP",
-        add_prefix=("",),
-        name="ccm_temp_shield_disaster",
-        kind=Kind.omitted,
-        doc="CCM Temp Shield (disaster)",
-        auto_monitor=True,
-        labels={"temp"},
-    )
+    ccm_temp_crystal = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM-ETTC-4010:TEMP", add_prefix=("",), name="ccm_temp_crystal", kind=Kind.omitted, doc="CCM Temp Crystal", auto_monitor=True, labels={"temp"})
+    ccm_temp_shield_disaster = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM-ETTC-4020:TEMP", add_prefix=("",), name="ccm_temp_shield_disaster", kind=Kind.omitted, doc="CCM Temp Shield (disaster)", auto_monitor=True, labels={"temp"})
 
-    ccm_heater_fault_1 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM-EMSW-4010:SWITCH",
-        add_prefix=("",),
-        name="ccm_heater_fault_1",
-        kind=Kind.omitted,
-        doc="CCM Heater Fault 1",
-        auto_monitor=True,
-        labels={"fault"},
-    )
-    ccm_heater_fault_2 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM-EMSW-4020:SWITCH",
-        add_prefix=("",),
-        name="ccm_heater_fault_2",
-        kind=Kind.omitted,
-        doc="CCM Heater Fault 2",
-        auto_monitor=True,
-        labels={"fault"},
-    )
-    ccm_heater_fault_3 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM-EMSW-4030:SWITCH",
-        add_prefix=("",),
-        name="ccm_heater_fault_3",
-        kind=Kind.omitted,
-        doc="CCM Heater Fault 3",
-        auto_monitor=True,
-        labels={"fault"},
-    )
+    ccm_heater_fault_1 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM-EMSW-4010:SWITCH", add_prefix=("",), name="ccm_heater_fault_1", kind=Kind.omitted, doc="CCM Heater Fault 1", auto_monitor=True, labels={"fault"})
+    ccm_heater_fault_2 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM-EMSW-4020:SWITCH", add_prefix=("",), name="ccm_heater_fault_2", kind=Kind.omitted, doc="CCM Heater Fault 2", auto_monitor=True, labels={"fault"})
+    ccm_heater_fault_3 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM-EMSW-4030:SWITCH", add_prefix=("",), name="ccm_heater_fault_3", kind=Kind.omitted, doc="CCM Heater Fault 3", auto_monitor=True, labels={"fault"})
 
-    ccm_energy = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM1:ENERGY-GET",
-        add_prefix=("",),
-        name="ccm_energy",
-        kind=Kind.omitted,
-        doc="CCM Energy",
-        auto_monitor=True,
-        labels={"energy"},
-    )
-    ccm_position = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CCM1:POSITION",
-        add_prefix=("",),
-        name="ccm_position",
-        kind=Kind.omitted,
-        doc="CCM Position",
-        auto_monitor=True,
-        labels={"string"},
-    )
+    ccm_energy = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM1:ENERGY-GET", add_prefix=("",), name="ccm_energy", kind=Kind.omitted, doc="CCM Energy", auto_monitor=True, labels={"energy"})
+    ccm_position = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CCM1:POSITION", add_prefix=("",), name="ccm_position", kind=Kind.omitted, doc="CCM Position", auto_monitor=True, labels={"string"})
 
 
 class CoolingWater(EPSSubDevices):
     """Cooling water signals at the cSAXS beamline."""
 
-    op_sl1_efsw_2010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-SL1-EFSW-2010:FLOW",
-        add_prefix=("",),
-        name="op_sl1_efsw_2010_flow",
-        kind=Kind.omitted,
-        doc="OP-SL1-EFSW-2010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    op_sl2_efsw_2010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-SL2-EFSW-2010:FLOW",
-        add_prefix=("",),
-        name="op_sl2_efsw_2010_flow",
-        kind=Kind.omitted,
-        doc="OP-SL2-EFSW-2010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    op_eb1_efsw_5010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-EB1-EFSW-5010:FLOW",
-        add_prefix=("",),
-        name="op_eb1_efsw_5010_flow",
-        kind=Kind.omitted,
-        doc="OP-EB1-EFSW-5010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    op_eb1_efsw_5020_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-EB1-EFSW-5020:FLOW",
-        add_prefix=("",),
-        name="op_eb1_efsw_5020_flow",
-        kind=Kind.omitted,
-        doc="OP-EB1-EFSW-5020",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    op_sl3_efsw_5010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-SL3-EFSW-5010:FLOW",
-        add_prefix=("",),
-        name="op_sl3_efsw_5010_flow",
-        kind=Kind.omitted,
-        doc="OP-SL3-EFSW-5010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    op_kb_efsw_6010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-KB-EFSW-6010:FLOW",
-        add_prefix=("",),
-        name="op_kb_efsw_6010_flow",
-        kind=Kind.omitted,
-        doc="OP-KB-EFSW-6010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    op_psh1_efsw_7010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-PSH1-EFSW-7010:FLOW",
-        add_prefix=("",),
-        name="op_psh1_efsw_7010_flow",
-        kind=Kind.omitted,
-        doc="OP-PSH1-EFSW-7010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
-    es_eb2_efsw_1010_flow = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-ES-EB2-EFSW-1010:FLOW",
-        add_prefix=("",),
-        name="es_eb2_efsw_1010_flow",
-        kind=Kind.omitted,
-        doc="ES-EB2-EFSW-1010",
-        auto_monitor=True,
-        labels={"flow"},
-    )
+    op_sl1_efsw_2010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-SL1-EFSW-2010:FLOW", add_prefix=("",), name="op_sl1_efsw_2010_flow", kind=Kind.omitted, doc="OP-SL1-EFSW-2010", auto_monitor=True, labels={"flow"})
+    op_sl2_efsw_2010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-SL2-EFSW-2010:FLOW", add_prefix=("",), name="op_sl2_efsw_2010_flow", kind=Kind.omitted, doc="OP-SL2-EFSW-2010", auto_monitor=True, labels={"flow"})
+    op_eb1_efsw_5010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-EB1-EFSW-5010:FLOW", add_prefix=("",), name="op_eb1_efsw_5010_flow", kind=Kind.omitted, doc="OP-EB1-EFSW-5010", auto_monitor=True, labels={"flow"})
+    op_eb1_efsw_5020_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-EB1-EFSW-5020:FLOW", add_prefix=("",), name="op_eb1_efsw_5020_flow", kind=Kind.omitted, doc="OP-EB1-EFSW-5020", auto_monitor=True, labels={"flow"})
+    op_sl3_efsw_5010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-SL3-EFSW-5010:FLOW", add_prefix=("",), name="op_sl3_efsw_5010_flow", kind=Kind.omitted, doc="OP-SL3-EFSW-5010", auto_monitor=True, labels={"flow"})
+    op_kb_efsw_6010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-KB-EFSW-6010:FLOW", add_prefix=("",), name="op_kb_efsw_6010_flow", kind=Kind.omitted, doc="OP-KB-EFSW-6010", auto_monitor=True, labels={"flow"})
+    op_psh1_efsw_7010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-OP-PSH1-EFSW-7010:FLOW", add_prefix=("",), name="op_psh1_efsw_7010_flow", kind=Kind.omitted, doc="OP-PSH1-EFSW-7010", auto_monitor=True, labels={"flow"})
+    es_eb2_efsw_1010_flow = Cpt(EpicsSignalRO, read_pv="X12SA-ES-EB2-EFSW-1010:FLOW", add_prefix=("",), name="es_eb2_efsw_1010_flow", kind=Kind.omitted, doc="ES-EB2-EFSW-1010", auto_monitor=True, labels={"flow"})
 
-    op_cs_ecvw_0010 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CS-ECVW-0010:PLC_OPEN",
-        add_prefix=("",),
-        name="op_cs_ecvw_0010",
-        kind=Kind.omitted,
-        doc="OP-CS-ECVW-0010",
-        auto_monitor=True,
-        labels={"valve"},
-    )
-    op_cs_ecvw_0020 = Cpt(
-        EpicsSignalRO,
-        read_pv="X12SA-OP-CS-ECVW-0020:PLC_OPEN",
-        add_prefix=("",),
-        name="op_cs_ecvw_0020",
-        kind=Kind.omitted,
-        doc="OP-CS-ECVW-0020",
-        auto_monitor=True,
-        labels={"valve"},
-    )
+    op_cs_ecvw_0010 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CS-ECVW-0010:PLC_OPEN", add_prefix=("",), name="op_cs_ecvw_0010", kind=Kind.omitted, doc="OP-CS-ECVW-0010", auto_monitor=True, labels={"valve"})
+    op_cs_ecvw_0020 = Cpt(EpicsSignalRO, read_pv="X12SA-OP-CS-ECVW-0020:PLC_OPEN", add_prefix=("",), name="op_cs_ecvw_0020", kind=Kind.omitted, doc="OP-CS-ECVW-0020", auto_monitor=True, labels={"valve"})
 
 
 class EPS(PSIDeviceBase):
@@ -592,26 +139,8 @@ class EPS(PSIDeviceBase):
     cooling_water = Cpt(CoolingWater, name="cooling_water", doc="Cooling Water")
 
     # Acknowledgment signals for PLC communication (if needed for future use)
-    ackerr = Cpt(
-        EpicsSignal,
-        read_pv="X12SA-EPS-PLC:ACKERR-REQUEST",
-        add_prefix=("",),
-        name="ackerr",
-        kind=Kind.omitted,
-        doc="ACKERR request - OP-CS-ECVW-0020",
-        auto_monitor=True,
-        labels={"request"},
-    )
-    request = Cpt(
-        EpicsSignal,
-        read_pv="X12SA-OP-CS-ECVW:PLC_REQUEST",
-        add_prefix=("",),
-        name="op_cs_ecvw_request",
-        kind=Kind.omitted,
-        doc="PLC request - OP-CS-ECVW-PLC_REQUEST",
-        auto_monitor=True,
-        labels={"request"},
-    )
+    ackerr = Cpt(EpicsSignal, read_pv="X12SA-EPS-PLC:ACKERR-REQUEST", add_prefix=("",), name="ackerr", kind=Kind.omitted, doc="ACKERR request - OP-CS-ECVW-0020", auto_monitor=True, labels={"request"})
+    request = Cpt(EpicsSignal, read_pv="X12SA-OP-CS-ECVW:PLC_REQUEST", add_prefix=("",), name="op_cs_ecvw_request", kind=Kind.omitted, doc="PLC request - OP-CS-ECVW-PLC_REQUEST", auto_monitor=True, labels={"request"})
 
     def _notify(self, msg: str, show_as_client_msg: bool = True):
         """Utility method to print a message, and optionally send it to the client UI if it should be shown also as a client message."""
@@ -657,11 +186,7 @@ class EPS(PSIDeviceBase):
         valves = [self.cooling_water.op_cs_ecvw_0010, self.cooling_water.op_cs_ecvw_0020]
 
         # Flow channels list extracted from CHANNELS
-        flow_items = [
-            walk.item
-            for walk in self.cooling_water.walk_signals()
-            if "flow" in walk.item._ophyd_labels_
-        ]
+        flow_items = [walk.item for walk in self.cooling_water.walk_signals() if "flow" in walk.item._ophyd_labels_]
 
         # --- Step 1: EPS alarm reset ---
         alarm_value = self.safe_get(eps_alarm_sig, 0)
@@ -701,16 +226,8 @@ class EPS(PSIDeviceBase):
         def snapshot():
             # Valve snapshot
             v_states = [self.safe_get(v, None) for v in valves]
-            v1 = f"{valves[0].attr_name[-4:]}=" + (
-                "OPEN  "
-                if v_states[0] is True or v_states[0] == 1
-                else "CLOSED" if v_states[0] is False or v_states[0] == 0 else "N/A  "
-            )
-            v2 = f"{valves[1].attr_name[-4:]}=" + (
-                "OPEN  "
-                if v_states[1] is True or v_states[1] == 1
-                else "CLOSED" if v_states[1] is False or v_states[1] == 0 else "N/A  "
-            )
+            v1 = f"{valves[0].attr_name[-4:]}=" + ("OPEN  " if v_states[0] is True or v_states[0] == 1 else "CLOSED" if v_states[0] is False or v_states[0] == 0 else "N/A  ")
+            v2 = f"{valves[1].attr_name[-4:]}=" + ("OPEN  " if v_states[1] is True or v_states[1] == 1 else "CLOSED" if v_states[1] is False or v_states[1] == 0 else "N/A  ")
             # 2 valves with a single space between => width ~ 21
             valve_str = f"{v1} {v2}"
 
@@ -718,9 +235,7 @@ class EPS(PSIDeviceBase):
             flow_states = []
             for fsig in flow_items:
                 fval = self.safe_get(fsig, None)
-                flow_states.append(
-                    True if fval in (1, True) else False if fval in (0, False) else None
-                )
+                flow_states.append(True if fval in (1, True) else False if fval in (0, False) else None)
 
             ok = sum(1 for f in flow_states if f is True)
             fail = sum(1 for f in flow_states if f is False)
@@ -751,9 +266,7 @@ class EPS(PSIDeviceBase):
             if both_open:
                 if stable_until is None:
                     stable_until = now + STABILITY
-                    print(
-                        f"[WaterCooling] Both valves OPEN → starting {STABILITY}s stability window…"
-                    )
+                    print(f"[WaterCooling] Both valves OPEN → starting {STABILITY}s stability window…")
                 else:
                     if now >= stable_until:
                         print("→ SUCCESS: Valves remained OPEN during stability window.")
@@ -775,10 +288,7 @@ class EPS(PSIDeviceBase):
         # ---- New: enum maps for numeric -> string rendering ----
         POSITION_ENUM = {0: "out of beam", 1: "in beam"}
         STRIPE_ENUM = {0: "Stripe 1 W/B4C", 1: "Stripe 2 NiV/B4C"}
-        POSITION_ATTRS = {
-            self.dmm_monochromator.dmm_position.attr_name,
-            self.ccm_monochromator.ccm_position.attr_name,
-        }
+        POSITION_ATTRS = {self.dmm_monochromator.dmm_position.attr_name, self.ccm_monochromator.ccm_position.attr_name}
         STRIPE_ATTRS = {self.dmm_monochromator.dmm_stripe.attr_name}
 
         def is_bool_like(v):
@@ -831,9 +341,7 @@ class EPS(PSIDeviceBase):
                 return f"{green+'OK'+white if not value else red+'FAULT'+white}"
 
             # ------------------- VALVE/SHUTTER -----------------
-            if (
-                "valve" in signal._ophyd_labels_ or "shutter" in signal._ophyd_labels_
-            ) and is_bool_like(value):
+            if ("valve" in signal._ophyd_labels_ or "shutter" in signal._ophyd_labels_) and is_bool_like(value):
                 return f"{green+'OPEN'+white if value else red+'CLOSED'+white}"
 
             # ------------------- FLOW (OK/FAIL) ----------------
@@ -873,48 +381,46 @@ class EPS(PSIDeviceBase):
                     return is_bool_like(v) and not bool(v)
 
                 if closed(v1) and closed(v2):
-                    print(
-                        f"\n{cyan}Hint:{white} Both water cooling valves are CLOSED.\n"
-                        f"You can open them using: {bold}dev.x12saEPS.water_cooling_op(){white}"
-                    )
+                    print(f"\n{cyan}Hint:{white} Both water cooling valves are CLOSED.\n" f"You can open them using: {bold}dev.x12saEPS.water_cooling_op(){white}")
 
-    # ----------------------------------------------------------
-    # Consistency report
-    # ----------------------------------------------------------
-    # def consistency_report(self, *, verbose=True):
-    #     missing = []
-    #     dupes = []
-    #     seen = {}
+# fmt: on
+# ----------------------------------------------------------
+# Consistency report
+# ----------------------------------------------------------
+# def consistency_report(self, *, verbose=True):
+#     missing = []
+#     dupes = []
+#     seen = {}
 
-    #     for sub_device in self.walk_components():
-    #         section = sub_device.name
-    #         for walk in sub_device.walk_components():
-    #             cpt: Cpt = walk.ancestors[-1]
-    #             it: EpicsSignalRO = walk.item
-    #             if not hasattr(self, it["attr"]):
-    #                 missing.append((section, it["attr"], it["label"], it["pv"]))
+#     for sub_device in self.walk_components():
+#         section = sub_device.name
+#         for walk in sub_device.walk_components():
+#             cpt: Cpt = walk.ancestors[-1]
+#             it: EpicsSignalRO = walk.item
+#             if not hasattr(self, it["attr"]):
+#                 missing.append((section, it["attr"], it["label"], it["pv"]))
 
-    #             pv = it["pv"]
-    #             if pv in seen:
-    #                 dupes.append((pv, seen[pv], (section, it["attr"], it["label"])))
-    #             else:
-    #                 seen[pv] = (section, it["attr"], it["label"])
+#             pv = it["pv"]
+#             if pv in seen:
+#                 dupes.append((pv, seen[pv], (section, it["attr"], it["label"])))
+#             else:
+#                 seen[pv] = (section, it["attr"], it["label"])
 
-    #     if verbose:
-    #         print("=== Consistency Report ===")
+#     if verbose:
+#         print("=== Consistency Report ===")
 
-    #         if missing:
-    #             print("\nMissing attributes:")
-    #             for sec, a, lbl, pv in missing:
-    #                 print(f"  - [{sec}] {a} {lbl} pv={pv}")
-    #         else:
-    #             print("\nNo missing attributes.")
+#         if missing:
+#             print("\nMissing attributes:")
+#             for sec, a, lbl, pv in missing:
+#                 print(f"  - [{sec}] {a} {lbl} pv={pv}")
+#         else:
+#             print("\nNo missing attributes.")
 
-    #         if dupes:
-    #             print("\nDuplicate PVs:")
-    #             for pv, f1, f2 in dupes:
-    #                 print(f"  {pv} → {f1} AND {f2}")
-    #         else:
-    #             print("\nNo duplicate PVs.")
+#         if dupes:
+#             print("\nDuplicate PVs:")
+#             for pv, f1, f2 in dupes:
+#                 print(f"  {pv} → {f1} AND {f2}")
+#         else:
+#             print("\nNo duplicate PVs.")
 
-    #     return {"missing_attrs": missing, "duplicate_pvs": dupes}
+#     return {"missing_attrs": missing, "duplicate_pvs": dupes}