docs(flomni): scan-mode profiles (high_res, high_res_1v5, normal, low_res) instead of fast_scan
CI for csaxs_bec / test (push) Successful in 4m30s

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QnSJvqxh9oDbshx8qXgeiX
This commit is contained in:
Mirko HollerandClaude Opus 5.5 committed 2026-10-26 11:59:03 +01:00
1 parent 43e92f1e44
commit 76723df5e3
4 files changed
+2 -2

No files matched your search

@@ -145,7 +145,7 @@ not have to be set by hand:
| 1, FZP disabled (alignment, affine matrix) | `fzp_off` | `flomni.realtime_system.apply_profile("fzp_off")` |
| 2, FZP-only calibration scan (clear `MatrixCorr` first: not part of the settings) | `fzp_calibration` | `apply_profile("fzp_calibration")` |
| 3, back to operation | `production` | `apply_profile("production")` |
| afterwards, faster scans (calibrated over ±7 V) | `fast_scan` | `apply_profile("fast_scan")` |
| afterwards, fast scans with the FZP at ±9 V (scan modes, flOMNI `FeedbackLoop/scan_modes.md`) | `high_res`, `normal`, `low_res` | `apply_profile("high_res")` |
Single values: `flomni.realtime_system.set(fzp_range_V_x=7, fzp_range_V_y=7)`,
`set(move_beyond_um_x=0.3)`, `set(exposure_during_motion=1)`; refused with the reason if a rule objects
@@ -34,7 +34,7 @@ live and saved value, the loop parameters it sets, its rules).
feedforward must be off while the FZP loop is off); `set(..., adjust=True)` changes the dependent settings the
rule names (never the ones given)
- `flomni.realtime_system.check(name=value)` — dry run
- `flomni.realtime_system.profiles()`, `apply_profile("production" | "fzp_off" | "fzp_calibration" | "fast_scan")`
- `flomni.realtime_system.profiles()`, `apply_profile("production" | "fzp_off" | "fzp_calibration" | "high_res" | "high_res_1v5" | "normal" | "low_res")` (scan modes 2026-10-26: flOMNI `FeedbackLoop/scan_modes.md`)
- `flomni.realtime_system.unsaved()` — what differs from the loop's parameter files
- `flomni.realtime_system.save_as_default()` — writes the live values into the loop's parameter files: the next
loop start uses them. Only for a change that should stay (a backup of each file is kept on the loop machine).