add first rev of eeprom
and ref voltage in varhandler
This commit is contained in:
223
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_crc_ex.c
Normal file
223
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_crc_ex.c
Normal file
@ -0,0 +1,223 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_hal_crc_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief Extended CRC HAL module driver.
|
||||
* This file provides firmware functions to manage the extended
|
||||
* functionalities of the CRC peripheral.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
================================================================================
|
||||
##### How to use this driver #####
|
||||
================================================================================
|
||||
[..]
|
||||
(+) Set user-defined generating polynomial through HAL_CRCEx_Polynomial_Set()
|
||||
(+) Configure Input or Output data inversion
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32L4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRCEx CRCEx
|
||||
* @brief CRC Extended HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
|
||||
* @brief Extended Initialization and Configuration functions.
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Extended configuration functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure the generating polynomial
|
||||
(+) Configure the input data inversion
|
||||
(+) Configure the output data inversion
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @brief Initialize the CRC polynomial if different from default one.
|
||||
* @param hcrc CRC handle
|
||||
* @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long).
|
||||
* This parameter is written in normal representation, e.g.
|
||||
* @arg for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65
|
||||
* @arg for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021
|
||||
* @param PolyLength CRC polynomial length.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref CRC_POLYLENGTH_7B 7-bit long CRC (generating polynomial of degree 7)
|
||||
* @arg @ref CRC_POLYLENGTH_8B 8-bit long CRC (generating polynomial of degree 8)
|
||||
* @arg @ref CRC_POLYLENGTH_16B 16-bit long CRC (generating polynomial of degree 16)
|
||||
* @arg @ref CRC_POLYLENGTH_32B 32-bit long CRC (generating polynomial of degree 32)
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_CRC_POL_LENGTH(PolyLength));
|
||||
|
||||
/* check polynomial definition vs polynomial size:
|
||||
* polynomial length must be aligned with polynomial
|
||||
* definition. HAL_ERROR is reported if Pol degree is
|
||||
* larger than that indicated by PolyLength.
|
||||
* Look for MSB position: msb will contain the degree of
|
||||
* the second to the largest polynomial member. E.g., for
|
||||
* X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */
|
||||
while ((msb-- > 0U) && ((Pol & ((uint32_t)(0x1U) << (msb & 0x1FU))) == 0U))
|
||||
{
|
||||
}
|
||||
|
||||
switch (PolyLength)
|
||||
{
|
||||
case CRC_POLYLENGTH_7B:
|
||||
if (msb >= HAL_CRC_LENGTH_7B)
|
||||
{
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
break;
|
||||
case CRC_POLYLENGTH_8B:
|
||||
if (msb >= HAL_CRC_LENGTH_8B)
|
||||
{
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
break;
|
||||
case CRC_POLYLENGTH_16B:
|
||||
if (msb >= HAL_CRC_LENGTH_16B)
|
||||
{
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
break;
|
||||
|
||||
case CRC_POLYLENGTH_32B:
|
||||
/* no polynomial definition vs. polynomial length issue possible */
|
||||
break;
|
||||
default:
|
||||
status = HAL_ERROR;
|
||||
break;
|
||||
}
|
||||
if (status == HAL_OK)
|
||||
{
|
||||
/* set generating polynomial */
|
||||
WRITE_REG(hcrc->Instance->POL, Pol);
|
||||
|
||||
/* set generating polynomial size */
|
||||
MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength);
|
||||
}
|
||||
/* Return function status */
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Reverse Input data mode.
|
||||
* @param hcrc CRC handle
|
||||
* @param InputReverseMode Input Data inversion mode.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref CRC_INPUTDATA_INVERSION_NONE no change in bit order (default value)
|
||||
* @arg @ref CRC_INPUTDATA_INVERSION_BYTE Byte-wise bit reversal
|
||||
* @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD HalfWord-wise bit reversal
|
||||
* @arg @ref CRC_INPUTDATA_INVERSION_WORD Word-wise bit reversal
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode));
|
||||
|
||||
/* Change CRC peripheral state */
|
||||
hcrc->State = HAL_CRC_STATE_BUSY;
|
||||
|
||||
/* set input data inversion mode */
|
||||
MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode);
|
||||
/* Change CRC peripheral state */
|
||||
hcrc->State = HAL_CRC_STATE_READY;
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Reverse Output data mode.
|
||||
* @param hcrc CRC handle
|
||||
* @param OutputReverseMode Output Data inversion mode.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion (default value)
|
||||
* @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE bit-level inversion (e.g. for a 8-bit CRC: 0xB5 becomes 0xAD)
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode));
|
||||
|
||||
/* Change CRC peripheral state */
|
||||
hcrc->State = HAL_CRC_STATE_BUSY;
|
||||
|
||||
/* set output data inversion mode */
|
||||
MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode);
|
||||
|
||||
/* Change CRC peripheral state */
|
||||
hcrc->State = HAL_CRC_STATE_READY;
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
Reference in New Issue
Block a user