This commit is contained in:
garcia_h committed 2026-08-27 14:09:08 +02:00
1 parent 80a39f283b
commit c5f6fc156e
2 files changed
+13 -6

No files matched your search

+3 -3
View File
@@ -63,12 +63,12 @@ encoder:
controller:
Kp: 1 # Proportional gain
Ki: 0 # Ki integral gain
Kd: 0 # Kd derivative gain
Ki: 0.1 # Ki integral gain
Kd: 1.5 # Kd derivative gain
Kff: 1 # Feed-forward gain
trajectory:
type: 0 # 0 = trapezoidal, 1 = S-curve (Ruckig)
type: 1 # 0 = trapezoidal, 1 = S-curve (Ruckig)
source: 0 # 0 = take trajectory setpoint from axis traj object, 1 =trajectory setpoint from plc
axis:
velocity: 2 # Default velo for axis
+10 -3
View File
@@ -1,22 +1,25 @@
axis: # Physical-axis configuration
id: ${AXIS_ID=1} # Unique numeric axis identifier
feedSwitchesOutput: ec0.s${BO_SID}.binaryOutput${BO_CH=04} # EtherCAT output that feeds the limit switches
#feedSwitchesOutput: ec0.s${BO_SID}.binaryOutput${BO_CH=04} # EtherCAT output that feeds the limit switches
type: joint # Physical motor axis
mode: CSV # Drive mode: CSV or CSP; CSP is required for this EL7062
autoEnable: # Native ecmc automatic axis enable/disable
enableTimeout: 10 # Maximum time allowed to auto-enable [s]
disableTimeout: 10 # Idle time before automatic disable [s]
tweakDist: 1.0
plc: # Axis PLC configuration
id: 1 # PLC identifier
enable: yes # Enable the axis PLC
enable: true # Enable the axis PLC
externalCommands: true # Allow the PLC to issue axis commands
epics: # EPICS interface configuration
name: ${AX_NAME=M1} # Axis process-variable name
precision: 3 # EPICS PREC field: displayed decimal places
description: OWIS Stage EL7062 # Axis description
description: OWIS stage with TR SSI encoder / EL7062 # Axis description
unit: mm # EPICS EGU field: engineering unit
motorRecord: # EPICS motor-record configuration
enable: false
syncSoftLimits: False # Keep motor-record and ecmc soft limits unsynchronized
fieldInit: 'RTRY=0,FOFF=Frozen' # Additional motor-record field initial values
@@ -26,6 +29,10 @@ drive: # Physical-drive co
type: 1 # Drive type: 0=stepper; 1=DS402 servo/advanced stepper
setpoint: ec0.s$(DRV_SID).velocitySetpoint01 # EtherCAT position-setpoint entry for CSP mode
control: ec0.s$(DRV_SID).driveControl01 # EtherCAT drive control-word entry
enable: 0 # Enable bit index in control word (not used if DS402)
reset: 1 # Reset bit in control word (if no drive reset bit then leave empty)
reduceTorque: 2 # Reduce torque bit in drive control word
reduceTorqueEnable: true # Enable reduce torque functionality
status: ec0.s$(DRV_SID).driveStatus01 # EtherCAT drive status-word entry
warning: 2 # Warning-bit index in the drive status word
error: # Drive-error bit indices in the status word; maximum three