diff --git a/ECMC/EL7041/cfg/axis.yaml b/ECMC/EL7041/cfg/axis.yaml index 21af2e2..dc90cfa 100644 --- a/ECMC/EL7041/cfg/axis.yaml +++ b/ECMC/EL7041/cfg/axis.yaml @@ -63,12 +63,12 @@ encoder: controller: Kp: 1 # Proportional gain - Ki: 0 # Ki integral gain - Kd: 0 # Kd derivative gain + Ki: 0.1 # Ki integral gain + Kd: 1.5 # Kd derivative gain Kff: 1 # Feed-forward gain trajectory: - type: 0 # 0 = trapezoidal, 1 = S-curve (Ruckig) + type: 1 # 0 = trapezoidal, 1 = S-curve (Ruckig) source: 0 # 0 = take trajectory setpoint from axis traj object, 1 =trajectory setpoint from plc axis: velocity: 2 # Default velo for axis diff --git a/ECMC/EL7062/cfg/axis.yaml b/ECMC/EL7062/cfg/axis.yaml index 8918238..73be9b3 100644 --- a/ECMC/EL7062/cfg/axis.yaml +++ b/ECMC/EL7062/cfg/axis.yaml @@ -1,22 +1,25 @@ axis: # Physical-axis configuration id: ${AXIS_ID=1} # Unique numeric axis identifier - feedSwitchesOutput: ec0.s${BO_SID}.binaryOutput${BO_CH=04} # EtherCAT output that feeds the limit switches + #feedSwitchesOutput: ec0.s${BO_SID}.binaryOutput${BO_CH=04} # EtherCAT output that feeds the limit switches + type: joint # Physical motor axis mode: CSV # Drive mode: CSV or CSP; CSP is required for this EL7062 autoEnable: # Native ecmc automatic axis enable/disable enableTimeout: 10 # Maximum time allowed to auto-enable [s] disableTimeout: 10 # Idle time before automatic disable [s] + tweakDist: 1.0 plc: # Axis PLC configuration id: 1 # PLC identifier - enable: yes # Enable the axis PLC + enable: true # Enable the axis PLC externalCommands: true # Allow the PLC to issue axis commands epics: # EPICS interface configuration name: ${AX_NAME=M1} # Axis process-variable name precision: 3 # EPICS PREC field: displayed decimal places - description: OWIS Stage EL7062 # Axis description + description: OWIS stage with TR SSI encoder / EL7062 # Axis description unit: mm # EPICS EGU field: engineering unit motorRecord: # EPICS motor-record configuration + enable: false syncSoftLimits: False # Keep motor-record and ecmc soft limits unsynchronized fieldInit: 'RTRY=0,FOFF=Frozen' # Additional motor-record field initial values @@ -26,6 +29,10 @@ drive: # Physical-drive co type: 1 # Drive type: 0=stepper; 1=DS402 servo/advanced stepper setpoint: ec0.s$(DRV_SID).velocitySetpoint01 # EtherCAT position-setpoint entry for CSP mode control: ec0.s$(DRV_SID).driveControl01 # EtherCAT drive control-word entry + enable: 0 # Enable bit index in control word (not used if DS402) + reset: 1 # Reset bit in control word (if no drive reset bit then leave empty) + reduceTorque: 2 # Reduce torque bit in drive control word + reduceTorqueEnable: true # Enable reduce torque functionality status: ec0.s$(DRV_SID).driveStatus01 # EtherCAT drive status-word entry warning: 2 # Warning-bit index in the drive status word error: # Drive-error bit indices in the status word; maximum three