# HLA Service Control Parameters

record(bo, "$(DEVICE):CONTROL-SCRUB") {
    field(DESC, "Activate scrubbung during decay")
    field(VAL, "0")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):CONTROL-VACUUM-MAX") {
    field(DESC, "Stop injection at this vacuum pressure")
    field(EGU, "1e-9 mbar") 
    field(VAL, "30")
    field(PREC, "3")
    field(FLNK, "$(DEVICE):CONTROL-VACUUM-MAX-PLOT")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):CONTROL-VACUUM-DYN") {
    field(DESC, "Stop injection at this vacuum pressure")
    field(EGU, "1e-9 mbar") 
    field(VAL, "27")
    field(PREC, "3")
    field(FLNK, "$(DEVICE):CONTROL-VACUUM-DYN-PLOT")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):CONTROL-VACUUM-DYN-FRAC") {
    field(DESC, "Fraction defining dynamic pressure ")
    field(VAL, "1.05")
    field(PREC, "3")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):CONTROL-VACUUM-MIN") {
    field(DESC, "Start injection at this vacuum pressure")
    field(EGU, "1e-9 mbar") 
    field(VAL, "24")
    field(PREC, "3")
    field(FLNK, "$(DEVICE):CONTROL-VACUUM-MIN-PLOT")
    field(PINI, "YES")
}

record(calc, "$(DEVICE):CONTROL-VACUUM-MAX-PLOT") {
    field(DESC, "Stop injection at this vacuum pressure")
    field(ASG, "READONLY")
    field(EGU, "mbar") 
    field(PREC, "-5")
    field(CALC, "A/1e9")
    field(INPA, "$(DEVICE):CONTROL-VACUUM-MAX")
}

record(calc, "$(DEVICE):CONTROL-VACUUM-DYN-PLOT") {
    field(DESC, "Stop injection at this vacuum pressure")
    field(ASG, "READONLY")
    field(EGU, "mbar") 
    field(PREC, "-5")
    field(CALC, "A/1e9")
    field(INPA, "$(DEVICE):CONTROL-VACUUM-DYN")
}

record(calc, "$(DEVICE):CONTROL-VACUUM-MIN-PLOT") {
    field(DESC, "Stop injection at this vacuum pressure")
    field(ASG, "READONLY")
    field(EGU, "mbar") 
    field(PREC, "-5")
    field(CALC, "A/1e9")
    field(INPA, "$(DEVICE):CONTROL-VACUUM-MIN")
}

record(ao, "$(DEVICE):CONTROL-CURRENT-MAX") {
    field(DESC, "Stop injection at this current")
    field(EGU, "mA") 
    field(VAL, "400")
    field(PREC, "3")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):CONTROL-CURRENT-MIN") {
    field(DESC, "Start injection at this current")
    field(EGU, "mA")
    field(VAL, "396")
    field(PREC, "3")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):CONTROL-GUNGRID-MAX") {
    field(DESC, "Set gun grid to val before injection")
    field(EGU, "V") 
    field(VAL, "170")
    field(PREC, "3")
    field(PINI, "YES")
}

# HLA Service Output/Result Parameters

record(ao, "$(DEVICE):TOPUP-TAU") {
    field(DESC, "Average tau since last top up")
    field(EGU,  "h") 
    field(VAL,  "100")
    field(PREC, "3")
    field(VAL,  "-1")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):TOPUP-DELTAT") {
    field(DESC, "Time since last top up")
    field(EGU,  "min") 
    field(VAL,  "100")
    field(PREC, "3")
    field(VAL,  "-1")
    field(PINI, "YES")
}

record(ao, "$(DEVICE):TOPUP-DELTAI") {
    field(DESC, "Current change since last top up")
    field(EGU,  "mA") 
    field(VAL,  "100")
    field(PREC, "3")
    field(VAL,  "-1")
    field(PINI, "YES")
}