# HLA Service Control Parameters
record(bo, "$(DEVICE):TEST") {
    field(DESC, "Test Trigger PM Logger")
    field(ASG,  "PROTECTED")
    field(VAL,  "0")
    field(PINI, "YES")
    field(HIGH, "1") # Seconds until automatic switch to 0
}

# emit event 1 to trigger copying of buffer Records after beam abort
record(calcout, "$(DEVICE):BEAM-ABORT-EVT") {
    field(DESC, "Trigger PM Buffer Copy")
    field(ASG,  "READONLY")
    field(CALC, "A")
    field(PINI, "YES")
    field(INPA, "AGESA-SBDC-0000:INT-COUNTER CP")
    field(HIGH, "1") # Seconds until automatic switch to 0
    field(OOPT, "On Change")
    field(OEVT, "1")
    field(ODLY, "30")  # Time Axis below needs to be adapted to follow this
}

# time axis for 15 minute data
record(waveform, "$(DEVICE):BUFFER-TIME") {
    field(DESC, "Time axis for 15min 10Hz buffer")
    field(ASG,  "READONLY")
    field(EGU,  "s")
    field(FTVL, "FLOAT")
    field(DTYP, "sequence")
    field(NELM, "9000")
    field(LOPR, "-870")
    field(HOPR, "30")
    field(PINI, "YES")
}

# Filling Pattern measured by APD X08DB-DFPM-DI:FW-SIS0DAQ-CH0-INTEGRAL-WF
record (compress, "$(DEVICE):BUFFER-FILLPATTERN-APD") {
    field(DESC, "5min Buffer for post mortem plot")
    field(ASG,  "READONLY")
    field(SCAN, "1 second")
    field(INP,  "X08DB-DFPM-DI:FW-SIS0DAQ-CH0-INTEGRAL-WF")
    field(ALG,  "Circular Buffer")
    field(NSAM, "432000") # 480 * 60 * 15
}

# Records for automatically copying HW buffer Records after beam abort
# AGESA-SBDC-0000:INT-COUNTER
# Circular Buffer Record for Live Copy of desired PVs