import slic.devices as sd


phaseShifter = sd.general.alvra_timing.PhaseShifterAramis(
    "SLAAR01-TSPL-EPL",
    z_undulator=127,
    description="Experiment laser phase shifter (Globi)"
)

prism = sd.general.smaract.SmarActStage(
    gonio="SARES11-CMOV-SMA691110",
    trans="SARES11-CMOV-SMA691111",
    rotat="SARES11-CMOV-SMA691112",
    z_undulator=127,
    description="Prime laser prism"
)

xmic = sd.general.smaract.SmarActStage(
    gonio="SARES11-CMOV-SMA691113",
    rotat="SARES11-CMOV-SMA691114",
    z_undulator=127,
    description="Prime microscope mirror"
)

primeSample = sd.endstations.alvra_prime.Huber(
    "SARES11-XSAM125",
    z_undulator=127,
    description="Sample XYZ manipulator"
)

primeMicroscope = sd.endstations.alvra_prime.Microscope(
    "SARES11-XMI125",
    z_undulator=127,
    description="Microscope focus and zoom"
)

primeTable = sd.endstations.alvra_prime.Table(
    "SARES11-XOTA125",
    z_undulator=127,
    description="Prime optical table"
)

vacuum = sd.endstations.alvra_prime.Vacuum(
    "SARES11-V",
    z_undulator=127,
    description="Prime vacuum system"
)

primeCryTrans = sd.endstations.alvra_prime.VonHamosBragg(
    "SARES11-XCRY125",
    z_undulator=127,
    description="Prime von Hamos X-trans (Bragg)"
)

#laser = sd.loptics.alvra_experiment.Laser_Exp(
#    "SLAAR11-LMOT",
#    z_undulator=122,
#    description="Experiment laser hardware"
#)

#laserShutter = sd.loptics.alvra_laser_shutter.laser_shutter(
#    "SLAAR11-LTIM01-EVR0",
#    z_undulator=122,
#    description="Laser Shutter"
#)

#pbpsOpt = sd.xdiagnostics.intensity_monitors.SolidTargetDetectorPBPS(
#    "SAROP11-PBPS117",
#    VME_crate="SAROP11-CVME-PBPS1",
#    link=9,
#    description="Intensity/position monitor after Optics hutch (PBPS)"
#)

#pbpsAtt = sd.xdiagnostics.intensity_monitors.SolidTargetDetectorPBPS(
#    "SAROP11-PBPS122",
#    VME_crate="SAROP11-CVME-PBPS1",
#    link=9,
#    description="Intensity/Position monitor after Attenuator"
#)

#screenFE = sd.xdiagnostics.profile_monitors.Pprm(
#    "SARFE10-PPRM053",
#    description="Profile monitor after single-shot spectrometer (PPRM)"
#)

#screenOP = sd.xdiagnostics.profile_monitors.Pprm(
#    "SARFE10-PPRM064",
#    description="Profile monitor after Front End"
#)

#screenMirrAlv1 = sd.xdiagnostics.profile_monitors.Pprm(
#    "SAROP11-PPRM066",
#    description="Profile monitor after Alvra Mirror 1 (PPRM)"
#)

#screenMirrAlv2 = sd.xdiagnostics.profile_monitors.Pprm(
#    "SAROP11-PPRM078",
#    description="Profile monitor after Alvra Mirror 2 (PPRM)"
#)

#screenMirrorV2 = sd.xdiagnostics.profile_monitors.Pprm(
#    "SAROP11-PPRM110",
#    description="Profile monitor after Vertical Mirror 2 (PPRM)"
#)

#screenOPEnd = sd.xdiagnostics.profile_monitors.Pprm(
#    "SAROP11-PPRM117",
#    description="Profile monitor after Optics hutch (PPRM)"
#)

#screenAtt = sd.xdiagnostics.profile_monitors.Pprm(
#    "SAROP11-PPRM122",
#    description="Profile monitor after Attenuator"
#)

#kbHor = sd.xoptics.KBhor.KBhor(
#    "SAROP11-OKBH124",
#    description="Alvra horizontal KB mirror"
#)

#kbVer = sd.xoptics.KBver.KBver(
#    "SAROP11-OKBV123",
#    description="Alvra vertical KB mirror"
#)

#attFE = sd.xoptics.attenuator_aramis.AttenuatorAramis(
#    "SARFE10-OATT053",
#    description="Attenuator in Front End"
#)

#attExp = sd.xoptics.attenuator_aramis.AttenuatorAramis(
#    "SAROP11-OATT120",
#    description="Attenuator Alvra"
#)

#mono = sd.xoptics.dcm.Double_Crystal_Mono(
#    "SAROP11-ODCM105",
#    description="Alvra DCM Monochromator"
#)

#refLaser = sd.xoptics.reflaser.RefLaser_Aramis(
#    "SAROP11-OLAS120",
#    description="Alvra beamline reference laser before KBs (OLAS)"
#)

#slitSwitch = sd.xoptics.slits.SlitBlades_old(
#    "SAROP11-OAPU104",
#    description="Slit in Optics hutch after Photon switchyard and before Alvra mono"
#)

#slitUnd = sd.xoptics.slits.SlitFourBlades_old(
#    "SARFE10-OAPU044",
#    description="Slit after Undulator"
#)

#slitAttExp = sd.xoptics.slits.SlitPosWidth_old(
#    "SAROP11-OAPU120",
#    description="Slits behind attenuator"
#)

##shutUnd = sd.???(
##    "SARFE10-OPSH044",
##    description="Photon shutter after Undulator"
##)

##gasMon = sd.???(
##    "SARFE10-PBIG050",
##    description="Gas Monitor Intensity (PBIG)"
##)

##pbpsUnd = sd.???(
##    "SARFE10-PBPS053",
##    z_undulator=44,
##    description="Intensity position monitor after Undulator (PBPS)"
##)

##shutFE = sd.???(
##    "SARFE10-SBST060",
##    description="Photon shutter in the end of Front End"
##)

##mirrorAlv1 = sd.???(
##    "SAROP11-OOMH064",
##    description="First Alvra Horizontal offset mirror (OMH064)"
##)

##mirrorAlv2 = sd.???(
##    "SAROP11-OOMH076",
##    description="Second Alvra Horizontal offset mirror (OMH076)"
##)

##mirrorV1 = sd.???(
##    "SAROP11-OOMV108",
##    description="Alvra Vertical offset Mirror 1 (OMV108)"
##)

##mirrorV2 = sd.???(
##    "SAROP11-OOMV109",
##    description="Alvra Vertical offset Mirror 2 (OMV109)"
##)

##pulsePicker = sd.???(
##    "SAROP11-OPPI110",
##    description="X-ray pulse picker"
##)

##shutOpt = sd.???(
##    "SAROP11-SBST114",
##    description="Shutter after Optics hutch"
##)

##DelayPALM = sd.???(
##    "SAROP11-PALM118",
##    description="Timing diagnostics THz streaking (PALM)"
##)

##DelayPSEN = sd.???(
##    "SAROP11-PSEN119",
##    description="Timing diagnostics spectral encoding (PSEN)"
##)