wip

logbook.md

@@ -959,7 +959,7 @@ OpenLoop:
 
 Status Review 2.8.2017
 ----------------------
-
+```
 cd ~/Documents/prj/SwissFEL/epics_ioc_modules/ESB_MX;PBInspect --cfg PBinspect.pbi --host SAR-CPPM-EXPMX1
 cd ~/Documents/prj/SwissFEL/epics_ioc_modules/ESB_MX/cfg/;gpasciiCommander --host SAR-CPPM-EXPMX1 -i
 $$$***
@@ -985,6 +985,39 @@ cd /scratch/ESB_MX/ESB_MX/qt
 caqtdm -macro 'P=SAR-ESB_MX' ESB_MX_exp.ui
 Press homing or following line:
 caput SAR-ESB_MX:ASYN.AOUT 'enable plc 1'
+```
+
+Recommissioning 13.4.2022
+-------------------------
+```
+MCS:
+
+Purchased On: 2017/12/18
+Part Type Name: MCS-3CC-ETHA-MOD
+MAC 1:  00:04:A3:A2:71:35
+Purchase Number:  5200119415
+
+root@SAR-CSSU-EXPMX1:~# echo -ne "\xff" > /dev/ttyM0 
+-> it worked but Zan can not make it run any more
 
 
 
+caput SAR-EXPMX1:ASYN.AOUT '#1p'
+caget SAR-EXPMX1:ASYN.TINP
+
+caput SAR-EXPMX1:ASYN.AOUT 'BrickLV.Reset=1'
+
+-> Motor 4 has a short cirquit, therefore the motion and shapepath is not possible.
+
+
+caput SAR-EXPMX1:ASYN.AOUT '&0#4->0'
+caput SAR-EXPMX1:ASYN.AOUT '&0#5->0'
+caput SAR-EXPMX1:ASYN.AOUT '&0#6->0'
+caput SAR-EXPMX1:ASYN.AOUT '&0#7->0'
+caput SAR-EXPMX1:ASYN.AOUT '&0#8->0'
+
+caput SAR-EXPMX1:ASYN.AOUT '#1..3j/'
+caput SAR-EXPMX1:ASYN.AOUT '#4j/'
+
+
+```