sf-mx/PBSwissMX
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

update motion sync

Browse Source
This commit is contained in:
zamofing_t
2018-11-12 15:10:19 +01:00
parent 4927a02706
commit 1e676bcd18
4 changed files with 76 additions and 39 deletions
Download Patch File Download Diff File Expand all files Collapse all files

34
Readme.md
View File

@@ -1016,7 +1016,41 @@ PB_BSREAD -> sample how to configure user Flags
Gate3[1].Chan[0].UserFlag -> is set to 0 when event triggered (mapped to output FronUnivOut4 in the EVR) Gate3[1].Chan[0].UserFlag -> is set to 0 when event triggered (mapped to output FronUnivOut4 in the EVR)
EVR output powerBrick register $(USR_FLAG_ID)
FrontUnivOut4 Gate3[1].Chan[0].UserFlag 5
FrontUnivOut5 Gate3[1].Chan[1].UserFlag 6
FrontUnivOut6 Gate3[1].Chan[2].UserFlag 7
Event 254 -> Pulser 0 -> FrontUnivOut4 Gate3[1].Chan[0].UserFlag
Event 40 -> Pulser 1 -> FrontUnivOut4 Gate3[1].Chan[1].UserFlag
Event 22 -> Pulser 2 -> FrontUnivOut4 Gate3[1].Chan[2].UserFlag
caput SAR-CVME-TIFALL5-EVG0:SoftEvt-EvtCode-SP 254
Sample test code for sync:
open prog 2
Gate3[0].GpioData[0].16.1=0
linearabs
//X50Y-0
dwell10
while(Gate3[1].Chan[0].UserFlag==0){}
while(1)
{
if(Gate3[1].Chan[1].UserFlag==0)
{
break
}
}
Gather.Enable=2
Gate3[0].GpioData[0].16.1=1
//pvt40abs
//X50:443.604Y-0:0
dwell1000
Gather.Enable=0
close
b2r
``` ```

66
evr_PCIe-300DC.subs
View File

@@ -1,7 +1,7 @@
file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db" file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db"
{ {
{ {
## Global settings ## Global settings
ExtInhib-Sel=0, #0 = Use Inhibit, 1 = Always permitt : Use HW trigger inhibit (EVRTG only) ExtInhib-Sel=0, #0 = Use Inhibit, 1 = Always permitt : Use HW trigger inhibit (EVRTG only)
Link-Clk-SP=142.8, #50-150 : Event Link speed (MHz) Link-Clk-SP=142.8, #50-150 : Event Link speed (MHz)
@@ -44,7 +44,7 @@ file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db"
PS7-Div-SP=2, #2-4294967295 :Integer divisor between the Event Clock and the sub-unit output. PS7-Div-SP=2, #2-4294967295 :Integer divisor between the Event Clock and the sub-unit output.
PS7-PulserMap-L-SP=0, #0-65535 :Trigger a pulser on prescaler rising edge. Pulsers 0-15 are bit-wise selectable PS7-PulserMap-L-SP=0, #0-65535 :Trigger a pulser on prescaler rising edge. Pulsers 0-15 are bit-wise selectable
PS7-PulserMap-H-SP=0, #0-255 :Trigger a pulser on prescaler rising edge. Pulsers 16-23 are bit-wise selectable PS7-PulserMap-H-SP=0, #0-255 :Trigger a pulser on prescaler rising edge. Pulsers 16-23 are bit-wise selectable
## Distributed bus ## Distributed bus
PulserMap-Dbus0-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable PulserMap-Dbus0-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable
PulserMap-Dbus1-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable PulserMap-Dbus1-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable
@@ -54,13 +54,13 @@ file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db"
PulserMap-Dbus5-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable PulserMap-Dbus5-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable
PulserMap-Dbus6-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable PulserMap-Dbus6-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable
PulserMap-Dbus7-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable PulserMap-Dbus7-SP=0, #0-16777215 :Trigger a pulser on DBus bit rising edge. Pulsers 0-23 are bit-wise selectable
## Pulsers ## Pulsers
Pul0-Name-I="Pulser 0" #Description of the pulser. Maximum 40 characters allowed! Pul0-Name-I="Pulser 0" #Description of the pulser. Maximum 40 characters allowed!
Pul0-Name-I.DESC="Pulse for WSC readout." #Secondary description of the pulser. Maximum 40 characters allowed! Pul0-Name-I.DESC="Pulse for WSC readout." #Secondary description of the pulser. Maximum 40 characters allowed!
Pul0-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul0-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul0-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul0-Polarity-Sel=1, #0 = Active High, 1 = Active Low
Pul0-Delay-SP=0, #Pulser delay in us (DI 1 event at 5400, need to trigger for bunch at 7500) Pul0-Delay-SP=0, #Pulser delay in us (DI 1 event at 5400, need to trigger for bunch at 7500)
Pul0-Width-SP=5000, #Pulser width in us Pul0-Width-SP=5000, #Pulser width in us
Pul0-Prescaler-SP=1, #0-65535 : Pulser prescaler Pul0-Prescaler-SP=1, #0-65535 : Pulser prescaler
@@ -68,24 +68,24 @@ file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db"
Pul1-Name-I="Pulser 1" #Description of the pulser. Maximum 40 characters allowed! Pul1-Name-I="Pulser 1" #Description of the pulser. Maximum 40 characters allowed!
Pul1-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul1-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul1-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul1-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul1-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul1-Polarity-Sel=1, #0 = Active High, 1 = Active Low
Pul1-Delay-SP=0, #Pulser delay in us Pul1-Delay-SP=0, #Pulser delay in us
Pul1-Width-SP=0, #Pulser width in us Pul1-Width-SP=5000, #Pulser width in us
Pul1-Prescaler-SP=1, #0-65535 : Pulser prescaler Pul1-Prescaler-SP=1, #0-65535 : Pulser prescaler
Pul2-Name-I="Pulser 2" #Description of the pulser. Maximum 40 characters allowed! Pul2-Name-I="Pulser 2" #Description of the pulser. Maximum 40 characters allowed!
Pul2-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul2-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul2-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul2-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul2-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul2-Polarity-Sel=1, #0 = Active High, 1 = Active Low
Pul2-Delay-SP=0, #Pulser delay in us Pul2-Delay-SP=0, #Pulser delay in us
Pul2-Width-SP=0, #Pulser width in us Pul2-Width-SP=5000, #Pulser width in us
Pul2-Prescaler-SP=1, #0-65535 : Pulser prescaler Pul2-Prescaler-SP=1, #0-65535 : Pulser prescaler
Pul3-Name-I="Pulser 3" #Description of the pulser. Maximum 40 characters allowed! Pul3-Name-I="Pulser 3" #Description of the pulser. Maximum 40 characters allowed!
Pul3-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul3-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul3-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul3-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul3-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul3-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul3-Delay-SP=0, #Pulser delay in us Pul3-Delay-SP=0, #Pulser delay in us
Pul3-Width-SP=0, #Pulser width in us Pul3-Width-SP=0, #Pulser width in us
Pul3-Prescaler-SP=1, #0-65535 : Pulser prescaler Pul3-Prescaler-SP=1, #0-65535 : Pulser prescaler
@@ -93,84 +93,84 @@ file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db"
Pul4-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul4-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul4-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul4-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul4-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul4-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul4-Delay-SP=0, #Pulser delay in us Pul4-Delay-SP=0, #Pulser delay in us
Pul4-Width-SP=0, #0-65535 : Width in us Pul4-Width-SP=0, #0-65535 : Width in us
Pul5-Name-I="Pulser 5" #Description of the pulser. Maximum 40 characters allowed! Pul5-Name-I="Pulser 5" #Description of the pulser. Maximum 40 characters allowed!
Pul5-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul5-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul5-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul5-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul5-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul5-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul5-Delay-SP=0, #Pulser delay in us Pul5-Delay-SP=0, #Pulser delay in us
Pul5-Width-SP=0, #0-65535 : Width in us Pul5-Width-SP=0, #0-65535 : Width in us
Pul6-Name-I="Pulser 6" #Description of the pulser. Maximum 40 characters allowed! Pul6-Name-I="Pulser 6" #Description of the pulser. Maximum 40 characters allowed!
Pul6-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul6-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul6-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul6-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul6-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul6-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul6-Delay-SP=0, #Pulser delay in us Pul6-Delay-SP=0, #Pulser delay in us
Pul6-Width-SP=0, #0-65535 : Width in us Pul6-Width-SP=0, #0-65535 : Width in us
Pul7-Name-I="Pulser 7" #Description of the pulser. Maximum 40 characters allowed! Pul7-Name-I="Pulser 7" #Description of the pulser. Maximum 40 characters allowed!
Pul7-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul7-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul7-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul7-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul7-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul7-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul7-Delay-SP=0, #Pulser delay in us Pul7-Delay-SP=0, #Pulser delay in us
Pul7-Width-SP=0, #0-65535 : Width in us Pul7-Width-SP=0, #0-65535 : Width in us
Pul8-Name-I="Pulser 8" #Description of the pulser. Maximum 40 characters allowed! Pul8-Name-I="Pulser 8" #Description of the pulser. Maximum 40 characters allowed!
Pul8-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul8-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul8-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul8-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul8-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul8-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul8-Delay-SP=0, #Pulser delay in us Pul8-Delay-SP=0, #Pulser delay in us
Pul8-Width-SP=0, #0-65535 : Width in us Pul8-Width-SP=0, #0-65535 : Width in us
Pul9-Name-I="Pulser 9" #Description of the pulser. Maximum 40 characters allowed! Pul9-Name-I="Pulser 9" #Description of the pulser. Maximum 40 characters allowed!
Pul9-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul9-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul9-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul9-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul9-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul9-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul9-Delay-SP=0, #Pulser delay in us Pul9-Delay-SP=0, #Pulser delay in us
Pul9-Width-SP=0, #0-65535 : Width in us Pul9-Width-SP=0, #0-65535 : Width in us
Pul10-Name-I="Pulser 10" #Description of the pulser. Maximum 40 characters allowed! Pul10-Name-I="Pulser 10" #Description of the pulser. Maximum 40 characters allowed!
Pul10-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul10-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul10-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul10-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul10-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul10-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul10-Delay-SP=0, #Pulser delay in us Pul10-Delay-SP=0, #Pulser delay in us
Pul10-Width-SP=0, #0-65535 : Width in us Pul10-Width-SP=0, #0-65535 : Width in us
Pul11-Name-I="Pulser 11" #Description of the pulser. Maximum 40 characters allowed! Pul11-Name-I="Pulser 11" #Description of the pulser. Maximum 40 characters allowed!
Pul11-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul11-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul11-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul11-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul11-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul11-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul11-Delay-SP=0, #Pulser delay in us Pul11-Delay-SP=0, #Pulser delay in us
Pul11-Width-SP=0, #0-65535 : Width in us Pul11-Width-SP=0, #0-65535 : Width in us
Pul12-Name-I="Pulser 12" #Description of the pulser. Maximum 40 characters allowed! Pul12-Name-I="Pulser 12" #Description of the pulser. Maximum 40 characters allowed!
Pul12-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul12-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul12-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul12-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul12-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul12-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul12-Delay-SP=0, #Pulser delay in us Pul12-Delay-SP=0, #Pulser delay in us
Pul12-Width-SP=0, #0-65535 : Width in us Pul12-Width-SP=0, #0-65535 : Width in us
Pul13-Name-I="Pulser 13" #Description of the pulser. Maximum 40 characters allowed! Pul13-Name-I="Pulser 13" #Description of the pulser. Maximum 40 characters allowed!
Pul13-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul13-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul13-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul13-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul13-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul13-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul13-Delay-SP=0, #Pulser delay in us Pul13-Delay-SP=0, #Pulser delay in us
Pul13-Width-SP=0, #0-65535 : Width in us Pul13-Width-SP=0, #0-65535 : Width in us
Pul14-Name-I="Pulser 14" #Description of the pulser. Maximum 40 characters allowed! Pul14-Name-I="Pulser 14" #Description of the pulser. Maximum 40 characters allowed!
Pul14-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul14-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul14-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul14-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul14-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul14-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul14-Delay-SP=0, #Pulser delay in us Pul14-Delay-SP=0, #Pulser delay in us
Pul14-Width-SP=0, #0-65535 : Width in us Pul14-Width-SP=0, #0-65535 : Width in us
Pul15-Name-I="Pulser 15" #Description of the pulser. Maximum 40 characters allowed! Pul15-Name-I="Pulser 15" #Description of the pulser. Maximum 40 characters allowed!
Pul15-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed! Pul15-Name-I.DESC="" #Secondary description of the pulser. Maximum 40 characters allowed!
Pul15-Ena-Sel=1, #0 = Disabled, 1 = Enabled Pul15-Ena-Sel=1, #0 = Disabled, 1 = Enabled
Pul15-Polarity-Sel=0, #0 = Active High, 1 = Active Low Pul15-Polarity-Sel=0, #0 = Active High, 1 = Active Low
Pul15-Delay-SP=0, #Pulser delay in us Pul15-Delay-SP=0, #Pulser delay in us
Pul15-Width-SP=0, #0-65535 : Width in us Pul15-Width-SP=0, #0-65535 : Width in us
@@ -197,7 +197,7 @@ file "$(mrfioc2_TEMPLATES=db)/evr-pcie-300DC.db"
# 34 DBus 2 # 34 DBus 2
# 35 DBus 3 # 35 DBus 3
# 36 DBus 4 # 36 DBus 4
# 37 DBus 5 # 37 DBus 5
# 38 DBus 6 # 38 DBus 6
# 39 Dbus 7 # 39 Dbus 7
# 40 Prescaler 0 # 40 Prescaler 0
@@ -336,14 +336,14 @@ pattern { EVT, CODE, FLNK }
{ "28", "28", "" } # BeamSync read-1 { "28", "28", "" } # BeamSync read-1
} }
# If you want to enable measuring the jitter on received events comment out the previous substitution and use this one instead # If you want to enable measuring the jitter on received events comment out the previous substitution and use this one instead
# #
# Additinal macros: # Additinal macros:
# HIST_LEN = number of histogram bins created from frequency measurements. Default 200. # HIST_LEN = number of histogram bins created from frequency measurements. Default 200.
# HIST_ULIM = histogram upper limit. Default 12. # HIST_ULIM = histogram upper limit. Default 12.
# HIST_LLIM = histogram lower limit. Default 8. # HIST_LLIM = histogram lower limit. Default 8.
# #
# NOTE: make sure your system supports the 'histogram' record before using this template! # NOTE: make sure your system supports the 'histogram' record before using this template!
# #
#file "$(mrfioc2_TEMPLATES=db)/evr-softEvent-measure.template"{ #file "$(mrfioc2_TEMPLATES=db)/evr-softEvent-measure.template"{
#pattern { EVT, CODE, FLNK } #pattern { EVT, CODE, FLNK }
# { "1", "1", "" } # { "1", "1", "" }
@@ -401,12 +401,12 @@ pattern { EVT, FUNC }
# EVT = Initial event code # EVT = Initial event code
# ID = Mappings must have unique ID for each PID-F combination. # ID = Mappings must have unique ID for each PID-F combination.
# Only mappings with ID=0 are displayed in the GUI # Only mappings with ID=0 are displayed in the GUI
# #
file "$(mrfioc2_TEMPLATES=db)/evr-pulserMap.template"{ file "$(mrfioc2_TEMPLATES=db)/evr-pulserMap.template"{
pattern {PID F, EVT, ID} pattern {PID F, EVT, ID}
{0, Trig, 22, 0 } # ESA laser diag-1 {0, Trig, 254, 0 } # ESB JF-Start
{1, Trig, 0, 0 } {1, Trig, 40, 0 } # ESB JF-Acquire frame
{2, Trig, 0, 0 } {2, Trig, 22, 0 } # ESA laser diag-1
{3, Trig, 0, 0 } {3, Trig, 0, 0 }
{4, Trig, 0, 0 } {4, Trig, 0, 0 }
{5, Trig, 0, 0 } {5, Trig, 0, 0 }
@@ -464,8 +464,8 @@ pattern {PID F, EVT, ID}
# Macros: # Macros:
# SYS = System name (auto expanded by parent) # SYS = System name (auto expanded by parent)
# DEVICE = Event receiver / timing card name (same as mrmEvrSetupVME()) Eg. EVR0. (auto expanded by parent) # DEVICE = Event receiver / timing card name (same as mrmEvrSetupVME()) Eg. EVR0. (auto expanded by parent)
# #
#file "$(mrfioc2_TEMPLATES=db)/flash.template" #file "$(mrfioc2_TEMPLATES=db)/flash.template"
#{ #{
# {} # {}
#} #}

9
python/MXMotion.py
View File

@@ -95,23 +95,24 @@ close
# - waits raising edge of <flag> and the sets DesTimeBase=ServoPeriod # - waits raising edge of <flag> and the sets DesTimeBase=ServoPeriod
# flag ='PowerBrick[0].GpioData[0].0.1==1' # flag ='PowerBrick[0].GpioData[0].0.1==1'
flag = 'Gate3[1].Chan[0].UserFlag==0' flag0 = 'Gate3[1].Chan[0].UserFlag==0'
flag1 = 'Gate3[1].Chan[1].UserFlag==0'
prg = ''' prg = '''
//L0=Sys.PhaseCount //L0=Sys.PhaseCount
//send 1"sync0 %d:%d\\n",Sys.PhaseCount,Sys.PhaseCount-L0 //send 1"sync0 %d:%d\\n",Sys.PhaseCount,Sys.PhaseCount-L0
while({flag}){{}} while({flag0}){{}}
//send 1"sync1 %d:%d\\n",Sys.PhaseCount,Sys.PhaseCount-L0 //send 1"sync1 %d:%d\\n",Sys.PhaseCount,Sys.PhaseCount-L0
//L1=Sys.PhaseCount //L1=Sys.PhaseCount
while(1) while(1)
{{ {{
if({flag}) if({flag1})
{{ {{
//PowerBrick[0].GpioData[0].16.8=255 //PowerBrick[0].GpioData[0].16.8=255
//send 1"sync2 %d:%d\\n",Sys.PhaseCount,Sys.PhaseCount-L1 //send 1"sync2 %d:%d\\n",Sys.PhaseCount,Sys.PhaseCount-L1
break break
}} }}
}} }}
'''.format(plcId=plcId, crdId=crdId, flag=flag) '''.format(plcId=plcId, crdId=crdId, flag0=flag0, flag1=flag1)
self.sync_prg = prg self.sync_prg = prg
self.sync_run = '&{crdId}b{prgId}r'''.format(prgId=prgId, plcId=plcId, crdId=crdId) self.sync_run = '&{crdId}b{prgId}r'''.format(prgId=prgId, plcId=plcId, crdId=crdId)

6
python/shapepath.py
View File

@@ -142,7 +142,8 @@ class ShapePath(MotionBase):
comm=self.comm comm=self.comm
gt=self.gather gt=self.gather
gt.set_phasemode(False) gt.set_phasemode(False)
gt.set_address("Motor[3].ActPos","Motor[2].ActPos","Motor[1].ActPos","Motor[3].DesPos","Motor[2].DesPos","Motor[1].DesPos") #gt.set_address("Motor[3].ActPos","Motor[2].ActPos","Motor[1].ActPos","Motor[3].DesPos","Motor[2].DesPos","Motor[1].DesPos")
gt.set_address("Motor[3].ActPos","Motor[2].ActPos","Motor[1].ActPos","Motor[3].DesPos","Motor[2].DesPos","Motor[1].DesPos","Gate3[1].Chan[1].UserFlag")
gt.set_property(MaxSamples=1000000, Period=acq_per) gt.set_property(MaxSamples=1000000, Period=acq_per)
ServoPeriod= .2 #0.2ms #Sys.ServoPeriod is dependent of !common() macro ServoPeriod= .2 #0.2ms #Sys.ServoPeriod is dependent of !common() macro
#ServoPeriod=comm.gpascii.servo_period #ServoPeriod=comm.gpascii.servo_period
@@ -555,7 +556,8 @@ if __name__=='__main__':
sp.setup_gather(acq_per=2) sp.setup_gather(acq_per=2)
#setup_sync(self, crdId=1, prgId=2, plcId=2, mode=0, **kwargs): #setup_sync(self, crdId=1, prgId=2, plcId=2, mode=0, **kwargs):
sp.setup_sync() #no sync at all sp.setup_sync() #no sync at all
#sp.setup_sync(mode=1) #sync with timing system #sp.setup_sync(mode=1) #sync with timing system (PLC)
sp.setup_sync(mode=2) #sync with timing system (PROG)
#sp.gen_grid_points(w=2,h=2,pitch=50,rnd=.2);sp.sort_points(xy);sp.setup_motion(fnPrg=fn+'.prg',mode=1,pt2pt_time=10,acq_per=1) #sp.gen_grid_points(w=2,h=2,pitch=50,rnd=.2);sp.sort_points(xy);sp.setup_motion(fnPrg=fn+'.prg',mode=1,pt2pt_time=10,acq_per=1)
sp.gen_swissmx_points(scale=10);sp.setup_motion(fnPrg=fn+'.prg',mode=1,pt2pt_time=40,acq_per=1) sp.gen_swissmx_points(scale=10);sp.setup_motion(fnPrg=fn+'.prg',mode=1,pt2pt_time=40,acq_per=1)