diff --git a/script/put_test.py b/script/put_test.py
index 4d01499..1ad0c4e 100644
--- a/script/put_test.py
+++ b/script/put_test.py
@@ -17,30 +17,30 @@ print "time after stopping", dt
 
 #to configure measuring parameters:
 
-caput ("X12SA-OP-BPM6:AcquireMode" ,"Continuous")
+caputq ("X12SA-OP-BPM6:AcquireMode" ,"Continuous")
 
-caput ("X12SA-OP-BPM6:Range", "+- 2.5 nA" ) #(or bigger with beam )
+caputq ("X12SA-OP-BPM6:Range", "+- 2.5 nA" ) #(or bigger with beam )
 
-caput ("X12SA-OP-BPM6:Geometry", "Square")
+caputq ("X12SA-OP-BPM6:Geometry", "Square")
 
-caput ("X12SA-OP-BPM6:ValuesPerRead", 1)
+caputq ("X12SA-OP-BPM6:ValuesPerRead", 1)
 
-caput ("X12SA-OP-BPM6:AveragingTime",  0.1)
+caputq ("X12SA-OP-BPM6:AveragingTime",  0.1)
 
 dt = datetime.now()
 print "datetime.now after 5 puts", dt
 
-caput ("X12SA-OP-BPM6:NumChannels", "4")
+caputq ("X12SA-OP-BPM6:NumChannels", "4")
 
-caput ("X12SA-OP-BPM6:ReadFormat", "Binary")
+caputq ("X12SA-OP-BPM6:ReadFormat", "Binary")
 
-caput ("X12SA-OP-BPM6:TriggerMode", "Ext. trig.") #if it should wait for the HW Trigger
+caputq ("X12SA-OP-BPM6:TriggerMode", "Ext. trig.") #if it should wait for the HW Trigger
 
-caput ("X12SA-OP-BPM6:TriggerMode", "Free run" ) #without HW Trigger
+caputq ("X12SA-OP-BPM6:TriggerMode", "Free run" ) #without HW Trigger
 
-caput ("X12SA-OP-BPM6:Resolution", "16 bits" )
+caputq ("X12SA-OP-BPM6:Resolution", "16 bits" )
 
-caput ("X12SA-OP-BPM6:TS:TSAveragingTime",  0.0001536) #for acq. 6.5 kHz"
+caputq ("X12SA-OP-BPM6:TS:TSAveragingTime",  0.0001536) #for acq. 6.5 kHz"
 
 #time.sleep(1.0)