diff --git a/script/caput_settings.py b/script/caput_settings.py
index 78ec170..6a93838 100644
--- a/script/caput_settings.py
+++ b/script/caput_settings.py
@@ -3,24 +3,24 @@ caput ("X12SA-OP-BPM6:Acquire", "Stop") #stops the acquisition
 
 #to configure measuring parameters:
 
-caput X12SA-OP-BPM6:AcquireMode "Continuous"
+caput ("X12SA-OP-BPM6:AcquireMode" ,"Continuous")
 
-caput X12SA-OP-BPM6:Range "+- 2.5 nA" (or bigger with beam )
+caput ("X12SA-OP-BPM6:Range", "+- 2.5 nA" ) #(or bigger with beam )
 
-caput X12SA-OP-BPM6:Geometry "Square"
+caput ("X12SA-OP-BPM6:Geometry", "Square")
 
-caput X12SA-OP-BPM6:ValuesPerRead 1
+caput ("X12SA-OP-BPM6:ValuesPerRead", 1)
 
-caput X12SA-OP-BPM6:AveragingTime 0.1
+caput ("X12SA-OP-BPM6:AveragingTime",  0.1)
 
-caput X12SA-OP-BPM6:NumChannels 4
+caput ("X12SA-OP-BPM6:NumChannels", 4)
 
-caput X12SA-OP-BPM6:ReadFormat "Binary"
+caput ("X12SA-OP-BPM6:ReadFormat", "Binary")
 
-caput X12SA-OP-BPM6:TriggerMode "Ext. trig." #if it should wait for the HW Trigger
+caput ("X12SA-OP-BPM6:TriggerMode", "Ext. trig.") #if it should wait for the HW Trigger
 
-caput X12SA-OP-BPM6:TriggerMode "Free run"  #without HW Trigger
+caput ("X12SA-OP-BPM6:TriggerMode", "Free run" ) #without HW Trigger
 
-caput X12SA-OP-BPM6:Resolution "16 bits" 
+caput ("X12SA-OP-BPM6:Resolution", "16 bits" )
 
-caput X12SA-OP-BPM6:TS:TSAveragingTime  0.0001536 #for acq. 6.5 kHz"
\ No newline at end of file
+caput ("X12SA-OP-BPM6:TS:TSAveragingTime",  0.0001536) #for acq. 6.5 kHz"