#Constants
AVERAGE = 1
EXPOSURE = 1.0
MEASUREMENTS = 1

#TakeImage at 710 eV at the given polarization
change_energy(710)
take_image(scans=1, switch_pol=False, measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
time.sleep(2.0)

#TwoImages Two Pol with C+/C- and ID1 + ID2, tune-detune, at 710 eV
set_beamline_setup(id ="ID1_ID2", en=710, pol1="Circ_Plus", alp1=0.0, har1=1, off1=0.0, pol2="Circ_Minus", alp2=0.0, har2=1, off2=0.0)
two_pol(switching="Tune_Detune", sequence="A", measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
time.sleep(2.0)

#TwoEnergies with lin hor polarization ID2 only (normal)
set_beamline_setup(id ="ID2", en=710, pol1="Lin_Hor")
two_energies(705, 710, measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
time.sleep(2.0)

#abs_spec(ranges=[[500.0, 1000.0, 100.0],], switch_pol=False, scans=1, exposure=EXPOSURE, average=AVERAGE) #Use manulally defined ranges and rois defined in GUI
abs_spec(ranges="C_edge", roi="test", switch_pol=False, scans=1, exposure=EXPOSURE, average=AVERAGE)






#Direct functions to change energy, pol, offset:
#change_energy(700)
#change_pol(1, "Circ_Plus" )                #Pol on ID1: "Circ_Plus", "Circ_Minus" , "Lin_Hor", "Lin_Ver" 
#change_pol(1, "Lin" , alpha = "0" )        #Lin pol on ID 1 
#change_offset(1, 0.0) #offset on ID1

#Auto-switching:
#switch_pol()

#Restoring beamline state defined in last set_beamline_setut:
#restore_beamline_setup()