#Parameters
'''
B1 = 0.5     # starting mag. field in Amps
B2 = -0.5     # final mag. field in Amps
BSTEP = 0.5   # step size mag. field in Amps
ENERGIES = (707.90, 703.90) #list of energies in eV
MODE = 1  #polarization (CIRC+ -> 1 or CIRC- -> 2)
OFFSET1 = -40 #ID1 offset
OFFSET2 = -15 #ID2 offset
FIELD_PRECISION = 0.05 #  in Amps
ENERGY_CHANGE_SLEEP = 0.0 # put the Enerrgy settling time if needed
FIELD_CHANGE_SLEEP =  0.0 # put the Field   settling time if needed
'''
# List of scans. Each scan is defined as: (start,stop, step)
# to make a whole loop two scans are needed: [(B1, B2, BSTEP),(B2,B1,-BSTEP)]
# to make half of a loop one scan is needed: [(B1, B2, BSTEP),]  <- don't forget to put comma before ]
RANGES = [(B1, B2, -BSTEP),(B2,B1,BSTEP)] 


#Pre-actions
# Here polarization and offsets are set

caput ("X11PHS-E:OPT","PGM+ID2")
caput(OTF_OFF1,OFFSET1) #detune ID1
caput(OTF_OFF2,OFFSET2)
wait_channel(OTF_DONE, 1, type = 'i')

if MODE is 1 or 2:
    caput(OTF_MODE2,MODE)
else:
    raise Exception("Invalid polarization type: " +  MODE)
    
wait_channel(OTF_DONE, 1, type = 'i')

# Generating a list of mag. fields (setpoints) needed for the loop
setpoints = []
for r in RANGES:
    setpoints = setpoints + frange(r[0], r[1], r[2], True)

# plot properties
set_preference(Preference.ENABLED_PLOTS,  ['field', 'tey_norm'])
set_preference(Preference.PLOT_TYPES, {'tey_norm':1})

scan = ManualScan(['field', 'Energy'], ['TEY', 'I0', 'polarization', 'temperature', 'RingCurrent', 'tey_norm'] , [min(setpoints), min(ENERGIES)], [max(setpoints), max(ENERGIES)], [len(setpoints)-1, len(ENERGIES)-1])
scan.start()

# Main loop
for B in setpoints:
    print "Setting field = ", B
    caput("X11MA-XMCD:I-SETraw",B)
    time.sleep( FIELD_CHANGE_SLEEP )     # Settling time

    readback1 = caget("X11MA-XMCD:Ireadout")    

    while abs(readback1-B) > FIELD_PRECISION:
        readback1 = caget("X11MA-XMCD:Ireadout")
        time.sleep(0.5)

    for E in ENERGIES:
        print "Setting energy = ", E
        caput(OTF_ESET, E)
        wait_channel(OTF_DONE, 1, type = 'i')
        readback2  = energy.read()
        if abs(readback2 - E) > 0.1 : # TODO: Check accuracy
            raise Exception('Energy could not be set to the value ' + str(E))
        sleep( ENERGY_CHANGE_SLEEP ) # Settling time

        detector1 = keithley_1a.read() #Keithley1
        detector2 = keithley_2a.read() #Keithley2
        #detector3 = keithley_3a.read() #Keithley3
        detector4 = caget(OTF_MODE1)   #polarization in ID1
        #detector5 = caget("X11MA-ID1:ALPHA-READ") # polAngle in ID1
        detector6 = caget('X11MA-ES3-LSCI:TEMP_RBV') #temperature.get() 
        detector7 = caget("ARIDI-PCT:CURRENT")
        #detector8 = signal_field_analog_x.read() # fieldAnalogX.get() 
        tey_norm = detector1/detector2     
        #trans_norm = detector3/detector2

        #converting polarization strings to integer numbers: C+ -> 1 and C- -> 2
        if detector4 == 'CIRC +': detector4 = 1
        elif detector4 == 'CIRC -': detector4 = 2
        else: detector4 = 0

        scan.append ([B, E], [readback1, readback2], [detector1, detector2, detector4, detector6, detector7, tey_norm])

scan.end()