#Constants
AVERAGE = 10
EXPOSURE = 5
MEASUREMENTS = 40

#TwoImages Two Pol with C+/C- and ID1 + ID2, tune-detune, at 710 eV
set_beamline_setup(id ="ID1_ID2", en=706.7, pol1="Circ_Plus", alp1=0.0, har1=1, off1=0.0, pol2="Circ_Minus", alp2=0.0, har2=1, off2=0.0)
two_pol(switching="Tune_Detune", sequence="A", measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
time.sleep(2.0)

#TwoEnergies with lin hor polarization ID2 only (normal)
set_beamline_setup(id ="ID2", en=706.7, pol1="Lin_Hor")
two_energies(706.7, 703, measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
time.sleep(2.0)

#TwoEnergies with lin hor polarization ID2 only (normal)
set_beamline_setup(id ="ID2", en=464.2, pol1="Lin_Hor")
two_energies(462.6, 458.2, measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
time.sleep(2.0)



#Constants
AVERAGE2 = 4
EXPOSURE2 = 4.0

change_energy(703)
abs_spec(ranges="Fe_L32__Arik_Beck_fine", roi="saraROI", switch_pol=False, scans=1, exposure=EXPOSURE2, average=AVERAGE2)


#Constants
AVERAGE3 = 1
EXPOSURE3 = 4.0

change_energy(450)
abs_spec(ranges="Ti_Sara", roi="saraROI", switch_pol=False, scans=1, exposure=EXPOSURE3, average=AVERAGE3)

change_energy(523)
abs_spec(ranges="O_Sara", roi="saraROI", switch_pol=False, scans=1, exposure=EXPOSURE3, average=AVERAGE3)





#TakeImage at 710 eV at the given polarization
#change_energy(710)
#take_image(scans=1, switch_pol=False, measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
#time.sleep(2.0)

#TwoImages Two Pol with C+/C- and ID1 + ID2, tune-detune, at 710 eV
#set_beamline_setup(id ="ID1_ID2", en=710, pol1="Circ_Plus", alp1=0.0, har1=1, off1=0.0, pol2="Circ_Minus", alp2=0.0, har2=1, off2=0.0)
#two_pol(switching="Tune_Detune", sequence="A", measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
#time.sleep(2.0)

#TwoEnergies with lin hor polarization ID2 only (normal)
#set_beamline_setup(id ="ID2", en=710, pol1="Lin_Hor")
#two_energies(705, 710, measurements=MEASUREMENTS, exposure=EXPOSURE, average=AVERAGE)
#time.sleep(2.0)

#abs_spec(ranges=[[500.0, 1000.0, 100.0],], switch_pol=False, scans=1, exposure=EXPOSURE, average=AVERAGE) #Use manulally defined ranges and rois defined in GUI


#Direct functions to change energy, pol, offset:
#change_energy(700)
#change_pol(1, "Circ_Plus" )                #Pol on ID1: "Circ_Plus", "Circ_Minus" , "Lin_Hor", "Lin_Ver" 
#change_pol(1, "Lin" , alpha = "0" )        #Lin pol on ID 1 
#change_offset(1, 0.0) #offset on ID1

#Auto-switching:
#switch_pol()

#Restoring beamline state defined in last set_beamline_setut:
#restore_beamline_setup()