#Script imported from: Dy_hyst_plus.xml

#Pre-actions
cawait('ACOAU-ACCU:OP-MODE', 'Light Available', type = 's')
caput('X07MA-ID:MODE', 'CIRC +')
time.sleep(1.0)
cawait('X07MA-ID:DONE', 'DONE', type = 's')
caput('X07MA-ID:ENERGY-OFFS', '-8.75')
cawait('X07MA-ID:DONE', 'DONE', type = 's')
caputq('X07MA-PC:CSCALER.INPB', '1')
caputq('X07MA-PC-PS2:SET:DMD:RAMPRATE:TPM', '2.0')
time.sleep(15.0)
caput('X07MA-OP-VG13:WT_SET', 'Try open')
time.sleep(5.0)

#TODO: Set the diplay names of positioners and detectors
scan = ManualScan(['field', 'Energy'], ['TEY', 'I0', 'trans', 'polarization', 'polAngle', 'temperature', 'RingCurrent', 'fieldAnalogX', 'tey_norm', 'trans_norm'] , [0.0, 1283.8], [55.0, 1291.8], [55, 1])
scan.start()

#Dimension 1

#RegionPositioner field
field = Channel('X07MA-PC:GO', type = 'd')
fieldReadback = Channel('X07MA-PC-PS2:STS:PMCURRENT', type = 'd')
for setpoint1 in frange(0.0, 55.0, 1.0, True):
    #Region 1 pre-actions
    if setpoint1 == 0.0:
        caputq('X07MA-PC-PS2:M:GO.A', '-3')
    field.put(setpoint1, 2.0) # TODO: Add appropriate timeout
    readback1 = fieldReadback.get()
    if abs(readback1 - setpoint1) > 0.5 : # TODO: Check accuracy
        raise Exception('Actor field could not be set to the value ' + str(setpoint1))
    #Dimension 2
    
    #ScalarDetector TEY
    TEY = Channel('X07MA-ES1-AI:SIGNAL0', type = 'd')
    #ScalarDetector I0
    I0 = Channel('X07MA-ES1-AI:SIGNAL1', type = 'd')
    #ScalarDetector trans
    trans = Channel('X07MA-ES1-AI:SIGNAL2', type = 'd')
    #ScalarDetector polarization
    polarization = Channel('X07MA-ID:MODE', type = 'd')
    #ScalarDetector polAngle
    polAngle = Channel('X07MA-ID:ALPHA', type = 'd')
    #ScalarDetector temperature
    temp = Channel('X07MA-PC-TC:STS:T1', type = 'd')
    #ScalarDetector RingCurrent
    RingCurrent = Channel('ARIDI-PCT:CURRENT', type = 'd')
    #ScalarDetector fieldAnalogX
    fieldAnalogX = Channel('X07MA-ES1-AI:SIGNAL4', type = 'd')
    #ArrayPositioner Energy
    Energy = Channel('X07MA-PHS-E:GO.A', type = 'd')
    EnergyReadback = Channel('X07MA-PGM:CERBK', type = 'd')
    for setpoint2 in (1291.8, 1283.8):
        Energy.put(setpoint2) # TODO: Add appropriate timeout
        readback2 = EnergyReadback.get()
        if abs(readback2 - setpoint2) > 0.1 : # TODO: Check accuracy
            raise Exception('Actor Energy could not be set to the value ' + str(setpoint2))
        time.sleep( 0.5 ) # Settling time
        #Detector TEY
        detector1 = TEY.get()
        #Detector I0
        detector2 = I0.get()
        #Detector trans
        detector3 = trans.get()
        #Detector polarization
        detector4 = polarization.get()
        #Detector polAngle
        detector5 = polAngle.get()
        #Detector temperature
        detector6 = temp.get()
        #Detector RingCurrent
        detector7 = RingCurrent.get()
        #Detector fieldAnalogX
        detector8 = fieldAnalogX.get()
        #Manipulation tey_norm
        #Variable Mappings
        c =  detector1
        d =  detector2
        
        import math
        teynorm = c/d
        		
        #Manipulation trans_norm
        #Variable Mappings
        c =  detector3
        d =  detector2
        
        import math
        transnorm = c/d
        		
        scan.append ([setpoint1, setpoint2], [readback1, readback2], [detector1, detector2, detector3, detector4, detector5, detector6, detector7, detector8, teynorm, transnorm])
    Energy.close()
    EnergyReadback.close()
    TEY.close()
    I0.close()
    trans.close()
    polarization.close()
    polAngle.close()
    temp.close()
    RingCurrent.close()
    fieldAnalogX.close()
field.close()
fieldReadback.close()

scan.end()