def error(msg): caput(beam_err, (msg[:40]) if len(msg) > 40 else msg) raise Exception (msg) #def sete(e, all=True, wavelengt=False): e = 0 all = False wavelengt = False beam_err = BEAMLINE_XNAME + '-ES-DAQ:BEAM-ERROR' beam_set = BEAMLINE_XNAME + '-ES-DAQ:BEAM-SET' ring_current_cutoff = 300.0 if wavelength: e = 12.39842/e if e < 4.7 or e > 17.5: error('ERROR:Energy out of range: 4.7 to 17.5 keV') print time.strftime('%X %x') print '... Setting energy to '+ str(e) +' keV.' msg = 'Working... (aiming @ '+ str(e) +' keV)' caput(beam_err, (msg[:40]) if len(msg) > 40 else msg) if caget('ALIRF-GUN:CUR-LOWLIM', 'd') < ring_current_cutoff: error('ERROR:Current is too low: < ' + str(ring_current_cutoff) + 'mA') if caget('X06DA-FE-AB1:CLOSE_EPS') == 'CLOSE': error('ERROR:ABSORBER closed; aborting...') if caget('X06DA-FE-PH1:OPEN_EPS') != "OPEN": error('ERROR:FE Shutter closed; aborting...') e0 = get_energy(False); dE = abs(e-e0) print '... started to move monochromator motors' print '... alignment will take some minutes ' act = 0 # do a setenergy to move theta 1 and 2 to calculated position in case they are not synchronized. theta1 = caget('X06DA-OP-MO1:ROX1.RBV', 'd') etheta1 = A2E(abs(theta1),1,1,1,True) theta2 = caget('X06DA-OP-MO1:ROX2.RBV', 'd') etheta2 = A2E(ABS(theta2),1,1,1,True) if abs (etheta1-etheta2) > 0.01: set_energy(e) while abs(e-e0) > 3e-5/tan(angle(e)): set_energy(e) e0 = get_energy(False) #----- correcting theta2 if intensity is low or if the encoder ----- #----- differs by more than rocking curve width from theory -------- # -------- for sete, /all, remove all filters if all: caput('X06DA-ES-FI1:SET',0) caput('X06DA-ES-FI2:SET',0) caput('X06DA-ES-FI3:SET',0) caput('X06DA-ES-FI4:SET',0) time.sleep(0.5) #-------- rock FIRST crystal until its peak is reached ------------- ff = 1 while ff: def rock(axis = th1, ffail = False, tt = 0.2, seti0 = False, dx = None, noref = False): rock() #TODO: #ROCK,1,dt = (dE>1.)*4e-2/e,ffail=ff # finer final rock time.sleep(1.0) print 'FINER FINAL ROCK' rock() e0 = get_energy() caput('X06DA-OP-MO:E-GET',e0) print e0 print '' print caget('X06DA-OP-MO:E-GET') caput(beam_err, 'Finito') caput(beam_set, 'DONE') print 'sete_done'