"""
manipulator Z scan, no Scienta
"""

POSITIONERS = (ManipulatorZ)
SENSORS = (SampleCurrent, RefCurrent, AuxCurrent, MachineCurrent)
STARTPOS = (113.15)
ENDPOS = (117.15)
NUMPOS = 40
STEPSIZE = 0.1
LATENCY = 0.0
DWELL = 14 * 3600 / 40
ENDSCAN = True # close shutter at end

value = DWELL * 10.0
SampleCurrentAveraging.write(value)
RefCurrentAveraging.write(value)
AuxCurrentAveraging.write(value)
AuxVoltageAveraging.write(value)

def trig():
    wait_beam()
    caput("X03DA-OP-10ADC:TRG.PROC", 1)

try:
    lscan(POSITIONERS, SENSORS, STARTPOS, ENDPOS, STEPSIZE, LATENCY, before_read=trig, after_read=after_readout)
finally:
    if ENDSCAN:
        after_scan()