diff --git a/script/users/Niels/ManipulatorXYScan_20191103.py b/script/users/Niels/ManipulatorXYScan_20191103.py
new file mode 100644
index 00000000..b6f22ff9
--- /dev/null
+++ b/script/users/Niels/ManipulatorXYScan_20191103.py
@@ -0,0 +1,39 @@
+"""
+Manipulator scan across the beam relative to current position
+
+set manipulator scan parameters below.
+set analyser parameters separately!
+move manipulator to center position before start!
+
+set ANGLE = -30.0 to move the sample across the beam.
+set ANGLE = +60.0 to move the sample along the beam.
+"""
+
+import math
+
+# adjust the following parameters
+DISTANCE = 3.0
+#ANGLE = -30.0 # move sample across beam
+ANGLE = +60.0 # move sample along beam
+STEPS = 15
+LATENCY = 0.0
+ENDSCAN = False
+
+# do not edit below
+DISTANCE_X = DISTANCE * math.cos(math.radians(ANGLE))
+DISTANCE_Y = DISTANCE * math.sin(math.radians(ANGLE))
+
+MOTOR = (ManipulatorX, ManipulatorY)
+SENSORS = (Counts, SampleCurrent, RefCurrent, MachineCurrent, EnergyDistribution, AngleDistribution)
+STARTPOS = (-DISTANCE_X / 2.0, -DISTANCE_Y / 2.0)
+ENDPOS = (DISTANCE_X / 2.0, DISTANCE_Y / 2.0)
+RELATIVE = True
+
+adjust_sensors()
+set_adc_averaging()
+
+try:
+    lscan(MOTOR, SENSORS, STARTPOS, ENDPOS, STEPS, LATENCY, RELATIVE, before_read=before_readout, after_read = after_readout)
+finally:
+    if ENDSCAN:
+        after_scan()