From d6c0799ffab85f0b2187ad221d6367e3d29386ab Mon Sep 17 00:00:00 2001 From: arrell_c Date: Wed, 31 May 2023 13:58:10 +0200 Subject: [PATCH] Create Athos Intensity Diagnostics/SATFE10 PDIM067 --- .../SATFE10-PDIM067.md | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 Athos-Intensity-Diagnostics/SATFE10-PDIM067.md diff --git a/Athos-Intensity-Diagnostics/SATFE10-PDIM067.md b/Athos-Intensity-Diagnostics/SATFE10-PDIM067.md new file mode 100644 index 0000000..b5bb9fc --- /dev/null +++ b/Athos-Intensity-Diagnostics/SATFE10-PDIM067.md @@ -0,0 +1,53 @@ +## Drawings +- [Overview](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=251739&pPosInQueryList=1&pCount=1&pIndexInQueryList=1&pKrz=&pHg=50024&pUg=24&pLnr=795&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) +- [Diode arm](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=200637&pPosInQueryList=1&pCount=1&pIndexInQueryList=1&pKrz=&pHg=50024&pUg=24&pLnr=176&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) +- [Diode holder](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=200639&pPosInQueryList=1&pCount=1&pIndexInQueryList=1&pKrz=&pHg=50024&pUg=24&pLnr=178&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) + + + +## Diode +10 mm x 10 mm, Si PIN photodiode, S3590-09, [specs](https://www.hamamatsu.com/eu/en/product/type/S3590-09/index.html) + +## ADC +Ioxos 2111, DC coupled, 16 bit, 250 Msps, [specs](https://www.ioxos.ch/wp-content/uploads/2018/02/ADC_3110_DS_A1.pdf) + +## Basic controls +Move diode in/out: +1. In - `caput SATFE10-PDIM067:PROBE_SP 1` +1. Out - `caput SATFE10-PDIM067:PROBE_SP 0` + +Overview panels: +`caqtdm S_SATFE10_PDIM067_expert.ui` + +## Data +Waveforms: +Details of the amplification and attenuation for the different waveforms TBC + +The following PVs are the integrated signal waveforms. +- SATFE10-LSCP2-FNS:CH1:VAL_GET +- SATFE10-LSCP2-FNS:CH2:VAL_GET +- SATFE10-LSCP2-FNS:CH3:VAL_GET + +## Alignment +Alignment check 8.1.20 +**In position:** +- 40.0 mm with User offset at 0.0 + +**Out position:** +- 0.0 mm with User offset at 0.0 + +## Triggering + +**EVR:** +- SATFE10-PDIM067-EVR0 + +**Triggering:** +- Pulser 2 +- Event 52 +- Delay 1002.612 uS +- Width 10.000 uS +- FrontUnivOut 6 + +**Control:** +- **On** `caput SATFE10-PDIM067-EVR0:FrontUnivOut6-Ena-SP 0` +- **Off** `caput SATFE10-PDIM067-EVR0:FrontUnivOut6-Ena-SP 1` \ No newline at end of file