From 368175a9a68155144b0910976d76750f23799a16 Mon Sep 17 00:00:00 2001 From: arrell_c Date: Tue, 30 May 2023 14:21:28 +0200 Subject: [PATCH] Update SARFE10 PBPS053 --- .../SARFE10-PBPS053.md | 30 ++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/Aramis-Intensity-Diagnostics/SARFE10-PBPS053.md b/Aramis-Intensity-Diagnostics/SARFE10-PBPS053.md index 491c78c..18c931a 100644 --- a/Aramis-Intensity-Diagnostics/SARFE10-PBPS053.md +++ b/Aramis-Intensity-Diagnostics/SARFE10-PBPS053.md @@ -1 +1,29 @@ -## Introduction \ No newline at end of file +## Guide and electronics +**The electronics and operation of the PBPS units are currently being updated. Further info to follow** +## Drawings +- [Overview](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197885&pPosInQueryList=1&pCount=831&pIndexInQueryList=35&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) +- [Device](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197886&pPosInQueryList=1&pCount=831&pIndexInQueryList=36&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) +- [Diode holder](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197909&pPosInQueryList=1&pCount=831&pIndexInQueryList=59&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) +## Attenuation +This device has 3 Kapton layers: +- 50 um kapton [Drawing](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197918&pPosInQueryList=1&pCount=831&pIndexInQueryList=68&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL) +- 125 um kapton +- approx 20 um black kapton + +## Device motion +The following motors are used to scan the device position, used for calibration of the device +- SARFE10-PBPS053:MOTOR_X1 (range -1.8, 2.5 mm) +- SARFE10-PBPS053:MOTOR_Y1 (range -2.3 , 1.7 mm) +Values: +- SARFE10-PBPS053:MOTOR_X1.VAL +- SARFE10-PBPS053:MOTOR_Y1.VAL + +## Modification history +- 02.11.20 Replaced 50 um kapton with approx 20 um black kapton, exchanged 50 nm Si3N4 with new target as old target looked burnt (brown beam profile on target) +- 07.01.21 Added 125 um and 50 um kapton in front of diodes as attenuation +- 21.12.22 Replaced lower 50 um Si3N4 and 30 un Si3N4 targets with burn marks + +## Burn mark examples +From 21.12.22 + + \ No newline at end of file