181 lines
11 KiB
Tcl
181 lines
11 KiB
Tcl
# SPDX-FileCopyrightText: 2024 Filip Leonarski, Paul Scherrer Institute <filip.leonarski@psi.ch>
|
|
# SPDX-License-Identifier: CERN-OHL-S-2.0
|
|
|
|
# Hierarchical cell: network_stack
|
|
proc create_hier_cell_network_stack { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_network_stack() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 eth_in
|
|
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 eth_out
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi_cfg
|
|
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 udp_out
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir I -type rst ap_rst_n
|
|
create_bd_pin -dir I -type clk axiclk
|
|
create_bd_pin -dir I -type rst resetn
|
|
create_bd_pin -dir I stat_rx_status
|
|
|
|
# Create instance: arp_0, and set properties
|
|
set arp_0 [ create_bd_cell -type ip -vlnv psi.ch:hls:arp:1.0 arp_0 ]
|
|
|
|
# Create instance: axis_data_fifo_arp_0, and set properties
|
|
set axis_data_fifo_arp_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_arp_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.FIFO_DEPTH {16} \
|
|
CONFIG.IS_ACLK_ASYNC {0} \
|
|
] $axis_data_fifo_arp_0
|
|
|
|
|
|
# Create instance: axis_data_fifo_arp_1, and set properties
|
|
set axis_data_fifo_arp_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_arp_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.FIFO_DEPTH {16} \
|
|
CONFIG.IS_ACLK_ASYNC {0} \
|
|
] $axis_data_fifo_arp_1
|
|
|
|
|
|
# Create instance: axis_data_fifo_icmp_0, and set properties
|
|
set axis_data_fifo_icmp_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_icmp_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.FIFO_DEPTH {16} \
|
|
CONFIG.IS_ACLK_ASYNC {0} \
|
|
] $axis_data_fifo_icmp_0
|
|
|
|
|
|
# Create instance: axis_data_fifo_icmp_1, and set properties
|
|
set axis_data_fifo_icmp_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_icmp_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.FIFO_DEPTH {16} \
|
|
CONFIG.IS_ACLK_ASYNC {0} \
|
|
] $axis_data_fifo_icmp_1
|
|
|
|
|
|
# Create instance: axis_data_fifo_ipv4_0, and set properties
|
|
set axis_data_fifo_ipv4_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_ipv4_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.FIFO_DEPTH {16} \
|
|
CONFIG.FIFO_MEMORY_TYPE {auto} \
|
|
] $axis_data_fifo_ipv4_0
|
|
|
|
|
|
# Create instance: axis_data_fifo_ptp_0, and set properties
|
|
set axis_data_fifo_ptp_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_ptp_0 ]
|
|
|
|
# Create instance: axis_data_fifo_udp_0, and set properties
|
|
set axis_data_fifo_udp_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_data_fifo:2.0 axis_data_fifo_udp_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.FIFO_DEPTH {256} \
|
|
CONFIG.FIFO_MEMORY_TYPE {auto} \
|
|
] $axis_data_fifo_udp_0
|
|
|
|
|
|
# Create instance: axis_switch_0, and set properties
|
|
set axis_switch_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axis_switch:1.1 axis_switch_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.ARB_ON_MAX_XFERS {0} \
|
|
CONFIG.ARB_ON_TLAST {1} \
|
|
CONFIG.HAS_TLAST {1} \
|
|
] $axis_switch_0
|
|
|
|
|
|
# Create instance: ethernet_0, and set properties
|
|
set ethernet_0 [ create_bd_cell -type ip -vlnv psi.ch:hls:ethernet:1.0 ethernet_0 ]
|
|
|
|
# Create instance: icmp_0, and set properties
|
|
set icmp_0 [ create_bd_cell -type ip -vlnv psi.ch:hls:icmp:1.0 icmp_0 ]
|
|
|
|
# Create instance: ipv4_0, and set properties
|
|
set ipv4_0 [ create_bd_cell -type ip -vlnv psi.ch:hls:ipv4:1.0 ipv4_0 ]
|
|
|
|
# Create instance: network_config_0, and set properties
|
|
set block_name network_config
|
|
set block_cell_name network_config_0
|
|
if { [catch {set network_config_0 [create_bd_cell -type module -reference $block_name $block_cell_name] } errmsg] } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2095 -severity "ERROR" "Unable to add referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
|
return 1
|
|
} elseif { $network_config_0 eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2096 -severity "ERROR" "Unable to referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
|
return 1
|
|
}
|
|
set_property CONFIG.DIRECT {1} $network_config_0
|
|
|
|
|
|
# Create instance: ptp_0, and set properties
|
|
set ptp_0 [ create_bd_cell -type ip -vlnv psi.ch:hls:ptp:1.0 ptp_0 ]
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net Conn1 [get_bd_intf_pins eth_out] [get_bd_intf_pins axis_switch_0/M00_AXIS]
|
|
connect_bd_intf_net -intf_net Conn2 [get_bd_intf_pins eth_in] [get_bd_intf_pins ethernet_0/eth_in]
|
|
connect_bd_intf_net -intf_net Conn3 [get_bd_intf_pins udp_out] [get_bd_intf_pins axis_data_fifo_udp_0/M_AXIS]
|
|
connect_bd_intf_net -intf_net arp_0_eth_out [get_bd_intf_pins arp_0/eth_out] [get_bd_intf_pins axis_data_fifo_arp_1/S_AXIS]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_0_M_AXIS [get_bd_intf_pins axis_data_fifo_ipv4_0/M_AXIS] [get_bd_intf_pins ipv4_0/eth_in]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_arp_0_M_AXIS [get_bd_intf_pins arp_0/arp_in] [get_bd_intf_pins axis_data_fifo_arp_0/M_AXIS]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_arp_1_M_AXIS [get_bd_intf_pins axis_data_fifo_arp_1/M_AXIS] [get_bd_intf_pins axis_switch_0/S00_AXIS]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_icmp_0_M_AXIS [get_bd_intf_pins axis_data_fifo_icmp_0/M_AXIS] [get_bd_intf_pins icmp_0/s_axis_icmp]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_icmp_1_M_AXIS [get_bd_intf_pins axis_data_fifo_icmp_1/M_AXIS] [get_bd_intf_pins axis_switch_0/S01_AXIS]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_ptp_0_M_AXIS [get_bd_intf_pins axis_data_fifo_ptp_0/M_AXIS] [get_bd_intf_pins ptp_0/eth_in]
|
|
connect_bd_intf_net -intf_net axis_data_fifo_udp_0_S_AXIS [get_bd_intf_pins axis_data_fifo_udp_0/S_AXIS] [get_bd_intf_pins ipv4_0/udp_out]
|
|
connect_bd_intf_net -intf_net ethernet_0_arp_out [get_bd_intf_pins axis_data_fifo_arp_0/S_AXIS] [get_bd_intf_pins ethernet_0/arp_out]
|
|
connect_bd_intf_net -intf_net ethernet_0_ip_out [get_bd_intf_pins axis_data_fifo_ipv4_0/S_AXIS] [get_bd_intf_pins ethernet_0/ip_out]
|
|
connect_bd_intf_net -intf_net ethernet_0_ptp_out [get_bd_intf_pins axis_data_fifo_ptp_0/S_AXIS] [get_bd_intf_pins ethernet_0/ptp_out]
|
|
connect_bd_intf_net -intf_net icmp_0_m_axis_icmp [get_bd_intf_pins axis_data_fifo_icmp_1/S_AXIS] [get_bd_intf_pins icmp_0/m_axis_icmp]
|
|
connect_bd_intf_net -intf_net ipv4_0_icmp_out [get_bd_intf_pins axis_data_fifo_icmp_0/S_AXIS] [get_bd_intf_pins ipv4_0/icmp_out]
|
|
connect_bd_intf_net -intf_net s_axi_cfg_1 [get_bd_intf_pins s_axi_cfg] [get_bd_intf_pins network_config_0/s_axi]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net ap_rst_n_1 [get_bd_pins ap_rst_n] [get_bd_pins arp_0/ap_rst_n] [get_bd_pins ethernet_0/ap_rst_n] [get_bd_pins icmp_0/ap_rst_n] [get_bd_pins ipv4_0/ap_rst_n] [get_bd_pins ptp_0/ap_rst_n]
|
|
connect_bd_net -net axi_clk_net [get_bd_pins axiclk] [get_bd_pins arp_0/ap_clk] [get_bd_pins axis_data_fifo_arp_0/s_axis_aclk] [get_bd_pins axis_data_fifo_arp_1/s_axis_aclk] [get_bd_pins axis_data_fifo_icmp_0/s_axis_aclk] [get_bd_pins axis_data_fifo_icmp_1/s_axis_aclk] [get_bd_pins axis_data_fifo_ipv4_0/s_axis_aclk] [get_bd_pins axis_data_fifo_ptp_0/s_axis_aclk] [get_bd_pins axis_data_fifo_udp_0/s_axis_aclk] [get_bd_pins axis_switch_0/aclk] [get_bd_pins ethernet_0/ap_clk] [get_bd_pins icmp_0/ap_clk] [get_bd_pins ipv4_0/ap_clk] [get_bd_pins network_config_0/clk] [get_bd_pins ptp_0/ap_clk]
|
|
connect_bd_net -net clear_counters_1 [get_bd_pins ethernet_0/in_clear_counters] [get_bd_pins icmp_0/in_clear_counters] [get_bd_pins network_config_0/clear_counters]
|
|
connect_bd_net -net ethernet_0_counter [get_bd_pins ethernet_0/counter] [get_bd_pins network_config_0/packets_eth]
|
|
connect_bd_net -net ethernet_0_counter_ap_vld [get_bd_pins ethernet_0/counter_ap_vld] [get_bd_pins network_config_0/packets_eth_valid]
|
|
connect_bd_net -net fpga_ipv4_addr_V_1 [get_bd_pins arp_0/fpga_ipv4_addr] [get_bd_pins ipv4_0/fpga_ipv4_addr] [get_bd_pins network_config_0/fpga_ipv4_addr]
|
|
connect_bd_net -net fpga_mac_addr_V_1 [get_bd_pins arp_0/fpga_mac_addr] [get_bd_pins ethernet_0/fpga_mac_addr] [get_bd_pins network_config_0/fpga_mac_addr]
|
|
connect_bd_net -net icmp_0_counter [get_bd_pins icmp_0/counter] [get_bd_pins network_config_0/packets_icmp]
|
|
connect_bd_net -net icmp_0_counter_ap_vld [get_bd_pins icmp_0/counter_ap_vld] [get_bd_pins network_config_0/packets_icmp_valid]
|
|
connect_bd_net -net network_config_0_direct [get_bd_pins ethernet_0/direct] [get_bd_pins ipv4_0/direct] [get_bd_pins network_config_0/direct]
|
|
connect_bd_net -net network_config_0_enable [get_bd_pins arp_0/enable] [get_bd_pins ethernet_0/enable] [get_bd_pins network_config_0/enable]
|
|
connect_bd_net -net network_config_0_eth_stat_rx_status [get_bd_pins stat_rx_status] [get_bd_pins network_config_0/eth_stat_rx_status]
|
|
connect_bd_net -net ptp_0_counter_error [get_bd_pins network_config_0/ptp_error] [get_bd_pins ptp_0/counter_error]
|
|
connect_bd_net -net ptp_0_counter_ns [get_bd_pins network_config_0/ptp_timestamp] [get_bd_pins ptp_0/counter_ns]
|
|
connect_bd_net -net ptp_0_synced_to_ptp [get_bd_pins network_config_0/ptp_sync] [get_bd_pins ptp_0/synced_to_ptp]
|
|
connect_bd_net -net resetn_1 [get_bd_pins resetn] [get_bd_pins axis_data_fifo_arp_0/s_axis_aresetn] [get_bd_pins axis_data_fifo_arp_1/s_axis_aresetn] [get_bd_pins axis_data_fifo_icmp_0/s_axis_aresetn] [get_bd_pins axis_data_fifo_icmp_1/s_axis_aresetn] [get_bd_pins axis_data_fifo_ipv4_0/s_axis_aresetn] [get_bd_pins axis_data_fifo_ptp_0/s_axis_aresetn] [get_bd_pins axis_data_fifo_udp_0/s_axis_aresetn] [get_bd_pins axis_switch_0/aresetn] [get_bd_pins network_config_0/resetn]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
} |