Files
Jungfraujoch/image_analysis/image_preprocessing/ImagePreprocessorCPU.cpp
T
leonarski_fandClaude Opus 5.5 0a515bb086 rc179: everything on rc178 after its merge into main (#88), except the CHANGELOG
The rc178 branch continued after #88 was squash-merged; this is its content from b9ada7914 (the tree
#88 squashed) to 094eee31a, as one change on main. The individual commits stay on the rc178 branch:

- still battery: --cold evicts each set's input from the page cache; Alvra pixel masks; manifest fixes
- AGIPD: converter to one rigid panel per module, int16 photons, mask folded in; still battery reads the converted sets
- DetectorModules: panel look-up by id, plane -> panel, plane bounds and a per-pixel walk; mask size checked
- tests: [PanelLayout] equivalence harness, stacked vs assembled panel layout
- Dense per-pixel maps through the panel table (panel layout stage 1)
- Panel id on spots and the panel table in the start message
- Viewer and preview show a panel detector as it lies on the detector plane
- Panel layout stage 3: per-panel spot finding (CPU+GPU, CCL) and raster algorithms on the plane raster
- Panel layout stage 2: prediction and Bragg integration through the panel table
- XTC reader: frames handed up as stored, streams indexed in parallel
- XFEL reader: integer frames stay integer, one gain, placement by panel
- EXTERNAL_TEST_DATA_STILLS.md: images used vs the entry for every set; drop "Not in the battery"
- still battery: EuXFEL sets read the depositors' Cheetah CXI files directly; AGIPD converter removed
- float32_to_int16.py: a non-finite pixel becomes -32768, the int16 error marker, not a zero count
- CrystFEL geometry: read the pixel masks and bad regions instead of ignoring them
- Panel layout stage 5: the XFEL reader hands up the stored frame and its panel table
- Panel table persisted in NXmx; modulation grid and pre-scan memo key on the plane
- still battery: Alvra sets take their pixel mask from the CrystFEL geometry, not --mask-good
- still battery: take the deposited model as mmCIF where the RCSB has no PDB-format file
- still battery: dimple gets PDB-format coordinates converted from an mmCIF-only deposition
- stills fixed cost: geometry refinement and pre-scan do the same work in less wall time
- stills geometry sample and trial spot finding run as many workers as the image pass
- Stills integration: background ring reach measured on empty apertures, radial curvature from the whole frame
- StillsPartialityRefine: the partiality width is the run's, measured on the crystals, not the prediction window's
- MergeOnTheFly: capture term and multiplicative outlier band for the stills merge (both opt-in)
- Stills given a cell: the written cell is the mean over the frames that are merged
- Stills: the radial curvature correction decided per run on the same empty apertures
- StillsPartialityRefine: measure the run width only on shells with signal
- Stills pre-scan: report the paired z of the radial-correction comparison
- module placement: the five concurrent fits each keep every thread
- still battery: score R-free against the deposited data through the same dimple protocol
- still battery: the R-free target is the lower of the deposition's dimple and published values
- Stills: background clip follows the radial curve; signal disk from the lattice spacing
- Stills keep an overloaded observation as a lower bound instead of dropping it
- Stills: drop the lattice-spacing signal disk; the correction decision back on the plain clip
- battery: R-free against the deposition without refinement only, one protocol for rotation and stills
- still battery: EuXFEL sets run on a 2,000-image subset for now
- stills geometry refinement: fit the detector distance and the cell together
- stills geometry refinement: a distance given with --detector-distance is held in the joint fit
- Metal integration engine: back to its panel-s5 kernels; Mac stills keep the old clip, no saturation count
- Metal integration test: the CPU comparison runs on a rotation experiment
- Stills: kept overloads go back to the drop where they are not concentrated at low resolution
- stills distance search: an absolute 30-3000 mm scan, a sample found without d-limits, the fit iterated
- battery results: XFEL still battery 20261022-1358 on rc178 0cf62452c - 12 sets, cold, R_free unrefined
- battery results: still summary gains the resolution of our merge and of the deposition
- Pre-scan masks a pixel at the saturation limit on most frames, as one holding the error value
- Stills keep an overload as a lower bound only where it has pixels at the limit; run-level gate removed
- XFEL reader: a per-frame mask is read the way the frames are, its chunk inflated outside the HDF5 lock
- stills distance search: every centre scanned with a wider acceptance, a larger sample where nothing indexes
- rugnux usage: --beam-center-check describes the absolute 30-3000 mm stills distance scan, not the old 60-160 % grid
- stills: detector tilt refined in the geometry pre-pass, kept where held-out frames agree
- CLAUDE.md: the changelog is written once, just before the merge into main - condensed one-liners of what users get
- broker: serve the placed model and its maps of the last rugnux live run (/rugnux/model.cif, /rugnux/map.ccp4)
- frontend: Mol* viewer of the placed model and its density on the Rugnux live page
- writer: _model.cif from rugnux live keeps the input model's metadata, as the served model.cif does
- rugnux live maps: one unit cell centred on the model; the viewer opens on all of it
- Anomalous difference map: ANOM/PHANOM in _maps.mtz, /rugnux/map.ccp4?type=anom, a magenta mesh in the viewer
- Mol* viewer: open with the maps drawn within 10 A of the centre of view
- Mol* viewer: aaredb's structure-viewer setup, on a black stage
- rugnux: the gain of a stills file that states none is read off its single-photon peak where the background resolves photons
- Mol* viewer: in line with AareDB's StructureView at its current head (8ece2c2)
- ACKNOWLEDGEMENT: the web frontend's Mol* viewer follows AareDB's setup (G. Gotthard, PSI)
- stills tilt decision: the modules stay where the run placed them
- still battery: no distance pins and no per-set tuning flags; gain from the data except where a file's baseline hides it
- battery results: rc178 6f6f69 - full still battery and full rotation battery with REFMAC
- Bragg integration: a CCD rotation sweep's sigmas at the measured gain, intensities in photons
- BackgroundGain: the gain of a frame that resolves photons is the spacing of its photon peaks, so a baseline left in the frame no longer hides it
- ShadowFinder: measure the background's azimuthal modulation instead of predicting it from the polarization
- BackgroundGain: one gain estimate for rotation and stills; the still battery no longer gives EuXFEL 152 its gain
- ShadowFinder: measure the modulation robustly under a wide one-sided shadow
- ShadowFinderTest: a one-sided shadow is not fitted as part of the background's modulation
- ShadowFinder: back to the predicted polarization factor, in the plane the background shows
- MXAnalysisAfterFPGA: the Bragg engine's edge mask in the image's layout, so raw / untransformed FPGA runs start again
- battery results: still battery on rc178 e54f55 replaces the earlier rc178 still tables
- XFELReader: per-frame mask and photon conversion without a library call or a branch per pixel
- stills geometry trial: the hypotheses a search asks are indexed side by side
- stills tilt decision: the fits start beside the pre-scan and the geometry trial
- XFELReader: a deflated frame is inflated and converted a piece at a time, while it is in the cache
- XFELReader: a byte-shuffled frame is unshuffled a piece at a time, a whole pixel per step
- GeometryRefiner: residuals carry only the blocks a fit moves; beam and distance one block
- GeometryRefiner: a spot's residual differentiates its observed and predicted halves apart
- docs: EXTERNAL_TEST_DATA lists every open-arm battery set, with corrected values and counts
- battery: doc_check.py cross-checks the manifests against the dataset pages
- stills module placement: the placement fit gets half the threads, each held-out fit an eighth
- still battery: the EuXFEL sets run on all their frames, as the published still runs did
- battery results: still battery on rc178 a0ce6c, cold on a quiet machine, replaces the earlier rc178 table
- macOS build: explicit size_t in the XFEL reader's row bounds; parentheses in the CPU preprocessor's select

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu
2026-10-23 17:56:42 +02:00

103 lines
5.2 KiB
C++

// SPDX-FileCopyrightText: 2026 Filip Leonarski, Paul Scherrer Institute <filip.leonarski@psi.ch>
// SPDX-License-Identifier: GPL-3.0-only
#include "ImagePreprocessorCPU.h"
#include <algorithm>
#include <limits>
#include <type_traits>
ImagePreprocessorCPU::ImagePreprocessorCPU(const DiffractionExperiment &experiment, const PixelMask &mask)
: ImagePreprocessor(experiment),
mask_bits(mask.GetPackedMask()) {
if (mask.GetMask().size() != npixels)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Pixel mask size doesn't match the image");
}
ImageStatistics ImagePreprocessorCPU::Analyze(ImagePreprocessorBuffer &processed_image, const uint8_t *image_ptr, CompressedImageMode image_mode) {
if (processed_image.size() != npixels)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "Processed image size mismatch");
ImageStatistics ret{};
AnalyzeBlock(processed_image, 0, image_ptr, npixels, image_mode, ret);
return ret;
}
void ImagePreprocessorCPU::AnalyzeBlock(ImagePreprocessorBuffer &processed_image, size_t first, const uint8_t *input,
size_t n, CompressedImageMode image_mode, ImageStatistics &stats) {
switch (image_mode) {
case CompressedImageMode::Int8:
return AnalyzeBlock<int8_t>(processed_image, first, input, n, INT8_MIN, INT8_MAX, stats);
case CompressedImageMode::Int16:
return AnalyzeBlock<int16_t>(processed_image, first, input, n, INT16_MIN, INT16_MAX, stats);
case CompressedImageMode::Int32:
return AnalyzeBlock<int32_t>(processed_image, first, input, n, INT32_MIN, INT32_MAX, stats);
case CompressedImageMode::Uint8:
return AnalyzeBlock<uint8_t>(processed_image, first, input, n, UINT8_MAX, UINT8_MAX, stats);
case CompressedImageMode::Uint16:
return AnalyzeBlock<uint16_t>(processed_image, first, input, n, UINT16_MAX, UINT16_MAX, stats);
case CompressedImageMode::Uint32:
return AnalyzeBlock<uint32_t>(processed_image, first, input, n, UINT32_MAX, UINT32_MAX, stats);
default:
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "RGB/float mode not supported");
}
}
template<class T>
void ImagePreprocessorCPU::AnalyzeBlock(ImagePreprocessorBuffer &processed_image, size_t first, const uint8_t *input,
size_t n, T err_pixel_val, T sat_pixel_val, ImageStatistics &ret) {
auto image = reinterpret_cast<const T *>(input);
int32_t *out = processed_image.data() + first;
if (sat_pixel_val > saturation_limit)
sat_pixel_val = static_cast<T>(saturation_limit);
// Every pixel is classified without a branch, so that the loop over the pixels vectorises. The
// extremes are taken over keys that order as the values do (a signed type's sign bit flipped), and a
// pixel that does not count gives the key no maximum or minimum can be moved by; the counts are
// integers. So the statistics are those of the pixel-by-pixel tests, whatever the order.
using U = std::make_unsigned_t<T>;
constexpr U flip = std::is_signed_v<T> ? static_cast<U>(U{1} << (8 * sizeof(T) - 1)) : U{0};
uint64_t n_masked = 0, n_error = 0, n_saturated = 0;
U key_max = 0, key_min = std::numeric_limits<U>::max();
const auto pixel = [&](size_t i, bool masked) {
const T v = image[i];
// Error/invalid marker = the pixel type's extreme value (0xFFFFFFFF for EIGER uint32). Tested
// before saturation, since for unsigned types the marker also exceeds sat_pixel_val (which is
// clipped above to the HDF5 saturation_value).
const bool error = !masked & (v == err_pixel_val);
const bool saturated = !masked & !error & (v >= sat_pixel_val);
const U counted = static_cast<U>(-static_cast<int>(!masked & !error & !saturated)); // all bits, or none
out[i] = (masked | error) ? INT32_MIN : saturated ? INT32_MAX : static_cast<int32_t>(v);
n_masked += masked;
n_error += error;
n_saturated += saturated;
const U key = static_cast<U>(v) ^ flip;
key_max = std::max<U>(key_max, key & counted);
key_min = std::min<U>(key_min, key | static_cast<U>(~counted));
};
// Runs of whole mask words with no pixel masked - nearly all of a detector - take a loop of their
// own, which the compiler vectorises; the rest is tested pixel by pixel.
for (size_t i = 0; i < n;) {
size_t end = i;
if ((first + i) % 32 == 0)
while (end + 32 <= n && mask_bits[(first + end) / 32] == 0)
end += 32;
if (end > i) {
for (; i < end; i++)
pixel(i, false);
} else {
pixel(i, (mask_bits[(first + i) / 32] >> ((first + i) % 32)) & 1U);
i++;
}
}
ret.masked_pixel_count += n_masked;
ret.error_pixel_count += n_error;
ret.saturated_pixel_count += n_saturated;
if (n_masked + n_error + n_saturated < n) { // some pixel counted
ret.max_value = std::max<long long>(ret.max_value, static_cast<T>(key_max ^ flip));
ret.min_value = std::min<long long>(ret.min_value, static_cast<T>(key_min ^ flip));
}
}