Jungfraujoch/docs/python_client

jfjoch-client

API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.

License Clarification

While this API definition is licensed under GPL-3.0, the GPL copyleft provisions do not apply when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.

This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.

This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms.

This Python package is automatically generated by the OpenAPI Generator project:

• API version: 1.0.0-rc.105
• Package version: 1.0.0-rc.105
• Generator version: 7.8.0
• Build package: org.openapitools.codegen.languages.PythonClientCodegen

Requirements.

Python 3.7+

Installation & Usage

pip install

If the python package is hosted on a repository, you can install directly using:

pip install git+https://git.psi.ch/jungfraujoch/jungfraujoch.git

(you may need to run pip with root permission: sudo pip install git+https://git.psi.ch/jungfraujoch/jungfraujoch.git)

Then import the package:

import jfjoch_client

Setuptools

Install via Setuptools.

python setup.py install --user

(or sudo python setup.py install to install the package for all users)

Then import the package:

import jfjoch_client

Tests

Execute pytest to run the tests.

Getting Started

Please follow the installation procedure and then run the following:

import jfjoch_client
from jfjoch_client.rest import ApiException
from pprint import pprint

# Defining the host is optional and defaults to http://localhost:5232
# See configuration.py for a list of all supported configuration parameters.
configuration = jfjoch_client.Configuration(
    host = "http://localhost:5232"
)



# Enter a context with an instance of the API client
with jfjoch_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = jfjoch_client.DefaultApi(api_client)

    try:
        # Cancel running data collection
        api_instance.cancel_post()
    except ApiException as e:
        print("Exception when calling DefaultApi->cancel_post: %s\n" % e)

Documentation for API Endpoints

All URIs are relative to http://localhost:5232

Class	Method	HTTP request	Description
DefaultApi	cancel_post	POST /cancel	Cancel running data collection
DefaultApi	config_azim_int_get	GET /config/azim_int	Get azimuthal integration configuration
DefaultApi	config_azim_int_put	PUT /config/azim_int	Configure azimuthal integration
DefaultApi	config_dark_mask_get	GET /config/dark_mask	Get settings for dark data collection to calculate mask
DefaultApi	config_dark_mask_put	PUT /config/dark_mask	Set configuration for dark data collection to calculate mask
DefaultApi	config_detector_get	GET /config/detector	Get detector configuration
DefaultApi	config_detector_put	PUT /config/detector	Change detector configuration
DefaultApi	config_file_writer_get	GET /config/file_writer	Get file writer settings
DefaultApi	config_file_writer_put	PUT /config/file_writer	Change file writer settings
DefaultApi	config_image_format_conversion_post	POST /config/image_format/conversion	Configure format for data collection with full conversion
DefaultApi	config_image_format_get	GET /config/image_format	Get image output format
DefaultApi	config_image_format_put	PUT /config/image_format	Change image output format
DefaultApi	config_image_format_raw_post	POST /config/image_format/raw	Configure format for raw data collection
DefaultApi	config_indexing_get	GET /config/indexing	Get indexing configuration
DefaultApi	config_indexing_put	PUT /config/indexing	Change indexing algorithm settings
DefaultApi	config_instrument_get	GET /config/instrument	Get instrument metadata
DefaultApi	config_instrument_put	PUT /config/instrument	Change instrument metadata
DefaultApi	config_internal_generator_image_put	PUT /config/internal_generator_image	Load binary image for internal FPGA generator
DefaultApi	config_internal_generator_image_tiff_put	PUT /config/internal_generator_image.tiff	Load TIFF image for internal FPGA generator
DefaultApi	config_mask_get	GET /config/mask	Get mask of the detector (binary)
DefaultApi	config_mask_tiff_get	GET /config/mask.tiff	Get mask of the detector (TIFF)
DefaultApi	config_roi_get	GET /config/roi	Get ROI definitions
DefaultApi	config_roi_put	PUT /config/roi	Upload ROI definitions
DefaultApi	config_select_detector_get	GET /config/select_detector	List available detectors
DefaultApi	config_select_detector_put	PUT /config/select_detector	Select detector
DefaultApi	config_spot_finding_get	GET /config/spot_finding	Get data processing configuration
DefaultApi	config_spot_finding_put	PUT /config/spot_finding	Configure spot finding
DefaultApi	config_user_mask_get	GET /config/user_mask	Detector must be Initialized. Get user mask of the detector (binary)
DefaultApi	config_user_mask_put	PUT /config/user_mask	Upload user mask of the detector (binary)
DefaultApi	config_user_mask_tiff_get	GET /config/user_mask.tiff	Detector must be Initialized. Get user mask of the detector (TIFF)
DefaultApi	config_user_mask_tiff_put	PUT /config/user_mask.tiff	Upload user mask of the detector
DefaultApi	config_zeromq_metadata_get	GET /config/zeromq_metadata	Get ZeroMQ metadata socket settings
DefaultApi	config_zeromq_metadata_put	PUT /config/zeromq_metadata	Set ZeroMQ metadata settings
DefaultApi	config_zeromq_preview_get	GET /config/zeromq_preview	Get ZeroMQ preview settings
DefaultApi	config_zeromq_preview_put	PUT /config/zeromq_preview	Set ZeroMQ preview settings
DefaultApi	deactivate_post	POST /deactivate	Prepare detector to turn off
DefaultApi	detector_status_get	GET /detector/status	Get detector status
DefaultApi	fpga_status_get	GET /fpga_status	Get status of FPGA devices
DefaultApi	image_buffer_clear_post	POST /image_buffer/clear	Clear image buffer
DefaultApi	image_buffer_image_cbor_get	GET /image_buffer/image.cbor	Get image message in CBOR format
DefaultApi	image_buffer_image_jpeg_get	GET /image_buffer/image.jpeg	Get preview image in JPEG format using custom settings
DefaultApi	image_buffer_image_tiff_get	GET /image_buffer/image.tiff	Get preview image in TIFF format
DefaultApi	image_buffer_start_cbor_get	GET /image_buffer/start.cbor	Get Start message in CBOR format
DefaultApi	image_buffer_status_get	GET /image_buffer/status	Get status of the image buffers
DefaultApi	initialize_post	POST /initialize	Initialize detector and data acquisition
DefaultApi	pedestal_post	POST /pedestal	Collect dark current for the detector
DefaultApi	preview_pedestal_tiff_get	GET /preview/pedestal.tiff	Get pedestal in TIFF format
DefaultApi	preview_plot_get	GET /preview/plot	Generate 1D plot from Jungfraujoch
DefaultApi	result_scan_get	GET /result/scan	Get full scan result
DefaultApi	start_post	POST /start	Start detector
DefaultApi	statistics_calibration_get	GET /statistics/calibration	Get calibration statistics
DefaultApi	statistics_data_collection_get	GET /statistics/data_collection	Get data collection statistics
DefaultApi	statistics_get	GET /statistics	Get general statistics
DefaultApi	status_get	GET /status	Get Jungfraujoch status
DefaultApi	trigger_post	POST /trigger	Send soft trigger to the detector
DefaultApi	version_get	GET /version	Get Jungfraujoch version of jfjoch_broker
DefaultApi	wait_till_done_post	POST /wait_till_done	Wait for acquisition done
DefaultApi	xfel_event_code_get	GET /xfel/event_code	Return XFEL event codes for the current data acquisition
DefaultApi	xfel_pulse_id_get	GET /xfel/pulse_id	Return XFEL pulse IDs for the current data acquisition

Documentation For Models

• AzimIntSettings
• BrokerStatus
• CalibrationStatisticsInner
• DarkMaskSettings
• DatasetSettings
• DatasetSettingsXrayFluorescenceSpectrum
• Detector
• DetectorList
• DetectorListElement
• DetectorModule
• DetectorModuleDirection
• DetectorPowerState
• DetectorSelection
• DetectorSettings
• DetectorState
• DetectorStatus
• DetectorTiming
• DetectorType
• ErrorMessage
• FileWriterFormat
• FileWriterSettings
• FpgaStatusInner
• GeomRefinementAlgorithm
• GridScan
• ImageBufferStatus
• ImageFormatSettings
• ImagePusherType
• IndexingAlgorithm
• IndexingSettings
• InstrumentMetadata
• JfjochSettings
• JfjochSettingsSsl
• JfjochStatistics
• MeasurementStatistics
• PcieDevicesInner
• PixelMaskStatistics
• Plot
• PlotUnitX
• Plots
• RoiAzimList
• RoiAzimuthal
• RoiBox
• RoiBoxList
• RoiCircle
• RoiCircleList
• RoiDefinitions
• RotationAxis
• ScanResult
• ScanResultImagesInner
• SpotFindingSettings
• StandardDetectorGeometry
• UnitCell
• ZeromqMetadataSettings
• ZeromqPreviewSettings
• ZeromqSettings

Documentation For Authorization

Endpoints do not require authorization.

Author

filip.leonarski@psi.ch