leonarski_fandClaude Opus 5.5
ebce906025
Combines the stills reader and module work (stills-readers, stills-modgeom, stills-euxfel) onto rc178 with the owner's decisions for this release: - Inputs are files, never a directory; several files of one format are one dataset (the multi-input CLI of the previous commit), so every reader takes an explicit list: JFJochXFELReader::ReadFiles, ReadCXI, ReadPanelTable and JFJochXTCReader::ReadFiles take std::vector<std::string>; ListFiles and xtc::CollectStreams are gone, CanRead* accept a regular file only. - One HDF5 frame reader (JFJochCrystFELReader -> JFJochXFELReader) parameterised by what the file holds: per-shot groups or a 3D stack, a /metadata panel table (posx/posy/angle, pixel size, nominal camera length, pixel mask: as SACLA writes), a Cheetah CXI single panel (square frame; a tiled slab is refused with a message). At most 8 files open; every file checked against the first. Signed 32-bit decode, per-frame 3D masks, panels at their own coffset (from the EuXFEL work). - Frames stored one chunk each are read the way the NXmx reader reads its images: only the chunk's place is asked of HDF5 under its lock (H5Dget_chunk_info_by_coord), the bytes are read through HDF5ImageSource::RawFile (positional, no lock) and decoded outside it - deflate(+shuffle) by zlib, bitshuffle/LZ4 (and zstd, plain LZ4) by CompressedImage's decoders. Bitshuffle/LZ4 used to go through HDF5's filter under the global lock, one frame at a time. - LCLS-I XTC (Rayonix): wavelength from the beam record, pixel size from the Rayonix model and binning, only --detector-distance needed; damaged/compressed frames skipped, a truncated last event dropped; std::ifstream, no POSIX calls: builds with MSVC. No DIALS .expt support at all. - CrystFEL .geom: module geometry only (panel ranges, fs/ss, corners, pixel size, coffset, data path) and optionally the camera length; everything else is ignored with a note in the log. - --mask-good / --mask-bad <file>:<dataset>: a mask array in another HDF5 file, in the frames' stored layout (what a .geom's mask_file used to give). - Gain measured on the background for panel-table and CXI input that states none (--gain overrides). - Detector modules from explicit geometry only (DetectorModules: the reader's panels, an NXmx file with one NXdetector_module per module, or --module-geometry); never from the image. Spots and predictions are mapped through the modules, the image is not re-assembled. - Module refinement in the stills bundle adjustment (Ceres; per-module shift and in-plane turn, gauge on mean shift/turn/scale and on the two tilt-like patterns when the tilt is refined; adopted only where it predicts held-out frames better). Applied for a foreign multi-panel detector (panel table, .geom panels); for a JUNGFRAU measured and reported only. Written to <prefix>_modules.h5 (NXmx NXdetector_module groups), read back with --module-geometry. - A panel-table file's camera length is nominal: with a reference cell it is refined from the cell. - Broker and writer output unchanged: masters keep the single NXdetector_module group, the start message carries no module list. Tests: [CrystFELGeometry], JFJochXFELReader_*, JFJochXTCReader, [JFJochMultiReader], [CellPopulation], SaturationCeiling_*, [DetectorModules], RefineGlobalGeometry_ModulePlacement, [reindex], Sublattice. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu
31 lines
1.6 KiB
C++
31 lines
1.6 KiB
C++
// SPDX-FileCopyrightText: 2026 Filip Leonarski, Paul Scherrer Institute <filip.leonarski@psi.ch>
|
|
// SPDX-License-Identifier: GPL-3.0-only
|
|
|
|
#pragma once
|
|
|
|
#include <string>
|
|
#include <vector>
|
|
|
|
#include "DetectorLayout.h"
|
|
#include "../common/DetectorModules.h"
|
|
|
|
// A CrystFEL detector geometry file (.geom), read for the module geometry only: the panels with their
|
|
// pixel ranges in the stored frame, fast/slow-scan directions, corners, pixel size and depth offset
|
|
// (coffset), where the frames are (data, dimN), and - optionally - the camera length. Everything else a
|
|
// geometry file may hold (photon energy, gain, saturation, masks, bad regions, value flags) is the data
|
|
// file's or the command line's to state, or rugnux's to measure: such keywords are listed in `ignored`
|
|
// for the log. Both the current syntax and the older one (global keys that take effect for the panels
|
|
// after them) are read. A keyword that would move pixels in a way not supported (a tilted panel, a
|
|
// frame laid out by a module dimension, panels in different datasets, a detector shift) is refused.
|
|
namespace crystfel {
|
|
|
|
// The layout the file describes; keywords read past are added to ignored, for the log.
|
|
xfel::Layout Read(const std::string &filename, std::vector<std::string> &ignored);
|
|
|
|
// The panels of a geometry file as the modules of an image they are laid on: each panel's pixel range is
|
|
// the image's columns (fs) and rows (ss) it covers, and its corner places it relative to the beam, which
|
|
// the image has at (beam_x, beam_y). Fewer than two panels: none.
|
|
DetectorModules ModulesOnImage(const xfel::Layout &geom, double beam_x, double beam_y);
|
|
|
|
} // namespace crystfel
|