Files
Jungfraujoch/tests/JFJochStateMachineTest.cpp
leonarski_fandClaude Opus 5.5 c2e5e4a4e8 broker: initialize clears the image buffer, turns live rugnux off and removes its model
Initialize is the fresh start between users, so nothing of the previous one's session is left:
the image buffer is cleared, live rugnux processing is disabled and the uploaded MR model is
dropped. It is done at the start of Initialize, under m then rugnux_mutex (the order the other
setters take), so it happens even if configuring the detector then fails. The receiver is always
Idle when the state machine is not running, so the buffer clear has no unmet precondition.

The dashboard's rugnux panel read the settings only once, on mount, so after an initialize from
any client it kept showing the previous run; it now polls them like the Rugnux tab does.

The /initialize description in jfjoch_api.yaml says so; the frontend client is regenerated
(description only). The python client docs and redoc follow at the release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4
2026-10-19 22:11:51 +02:00

628 lines
29 KiB
C++

// SPDX-FileCopyrightText: 2024 Filip Leonarski, Paul Scherrer Institute <filip.leonarski@psi.ch>
// SPDX-License-Identifier: GPL-3.0-only
#include <catch2/catch_all.hpp>
#include "../broker/JFJochStateMachine.h"
#include "../acquisition_device/HLSSimulatedDevice.h"
#include "../receiver/JFJochReceiverService.h"
using namespace std::literals::chrono_literals;
TEST_CASE("JFJochStateMachine_States") {
Logger logger("JFJochStateMachine_States");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
DatasetSettings setup;
REQUIRE(state_machine.GetStatus().state == JFJochState::Inactive);
REQUIRE_THROWS(state_machine.Start(setup));
REQUIRE_THROWS(state_machine.Pedestal());
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
REQUIRE_NOTHROW(state_machine.Deactivate());
REQUIRE(state_machine.GetStatus().state == JFJochState::Inactive);
}
TEST_CASE("JFJochStateMachine_Initialize_DisablesRugnux") {
Logger logger("JFJochStateMachine_Initialize_DisablesRugnux");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
state_machine.SetRugnuxLive(true, 4, 30.0);
REQUIRE(state_machine.GetRugnuxLive().enable);
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
const auto s = state_machine.GetRugnuxLive();
CHECK(!s.enable);
CHECK(s.model == nullptr);
CHECK(s.model_size_bytes == 0);
}
TEST_CASE("JFJochStateMachine_State_Pedestal") {
Logger logger("JFJochStateMachine_State_Pedestal");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
DatasetSettings setup;
state_machine.DebugOnly_SetState(JFJochState::Calibration);
REQUIRE(state_machine.GetStatus().state == JFJochState::Calibration);
REQUIRE_THROWS(state_machine.Start(setup));
REQUIRE_THROWS(state_machine.Pedestal());
REQUIRE_THROWS(state_machine.Initialize());
REQUIRE(state_machine.WaitTillMeasurementDone(std::chrono::milliseconds(1)).state == JFJochState::Calibration);
}
TEST_CASE("JFJochStateMachine_State_Measure") {
Logger logger("JFJochStateMachine_State_Measure");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
DatasetSettings setup;
state_machine.DebugOnly_SetState(JFJochState::Measuring);
REQUIRE(state_machine.GetStatus().state == JFJochState::Measuring);
REQUIRE_THROWS(state_machine.Start(setup));
REQUIRE_THROWS(state_machine.Pedestal());
REQUIRE_THROWS(state_machine.Initialize());
REQUIRE(state_machine.WaitTillMeasurementDone(std::chrono::milliseconds(1)).state == JFJochState::Measuring);
DetectorSettings settings{};
REQUIRE_THROWS(state_machine.LoadDetectorSettings(settings));
}
TEST_CASE("JFJochStateMachine_State_Error") {
Logger logger("JFJochStateMachine_State_Error");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
DatasetSettings setup;
state_machine.DebugOnly_SetState(JFJochState::Error,
"msg1234",
BrokerStatus::MessageSeverity::Error);
REQUIRE(state_machine.GetStatus().state == JFJochState::Error);
REQUIRE(state_machine.GetStatus().message.has_value());
REQUIRE(state_machine.GetStatus().message == "msg1234");
REQUIRE(state_machine.GetStatus().message_severity == BrokerStatus::MessageSeverity::Error);
state_machine.DebugOnly_SetState(JFJochState::Inactive, "msg3456", BrokerStatus::MessageSeverity::Info);
REQUIRE(state_machine.GetStatus().state == JFJochState::Inactive);
REQUIRE(state_machine.GetStatus().message.has_value());
REQUIRE(state_machine.GetStatus().message == "msg3456");
REQUIRE(state_machine.GetStatus().message_severity == BrokerStatus::MessageSeverity::Info);
state_machine.DebugOnly_SetState(JFJochState::Error);
REQUIRE(state_machine.GetStatus().state == JFJochState::Error);
REQUIRE(!state_machine.GetStatus().message.has_value());
REQUIRE_THROWS(state_machine.Start(setup));
REQUIRE_THROWS(state_machine.Pedestal());
REQUIRE(state_machine.WaitTillMeasurementDone(std::chrono::milliseconds(1)).state == JFJochState::Error);
DetectorSettings settings;
REQUIRE_NOTHROW(state_machine.LoadDetectorSettings(settings));
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
}
TEST_CASE("JFJochStateMachine_NoDetectorSetup") {
Logger logger("JFJochStateMachine_NoDetectorSetup");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
REQUIRE_THROWS(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
}
TEST_CASE("JFJochStateMachine_AddDetectorSetup") {
Logger logger("JFJochStateMachine_AddDetectorSetup");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
DetectorSetup setup = DetJF4M();
state_machine.AddDetectorSetup(setup);
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
}
TEST_CASE("JFJochStateMachine_AddDetectorSetup_Gain") {
Logger logger("JFJochStateMachine_AddDetectorSetup_Gain");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
DetectorSetup setup = DetJF(4);
setup.LoadGain({"../../tests/test_data/gainMaps_M049.bin",
"../../tests/test_data/gainMaps_M049.bin",
"../../tests/test_data/gainMaps_M049.bin",
"../../tests/test_data/gainMaps_M049.bin"});
state_machine.AddDetectorSetup(setup);
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
}
TEST_CASE("JFJochStateMachine_AddDetectorSetup_Multiple") {
Logger logger("JFJochStateMachine_AddDetectorSetup_Multiple");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
REQUIRE_NOTHROW(state_machine.AddDetectorSetup(DetJF(4, 1, 0,0,false,"Det1", {"mx1", "mx2", "mx3", "mx4"})));
REQUIRE_NOTHROW(state_machine.AddDetectorSetup(DetEIGER(2, 1, 0, 0, false, "Det2", {"mx1", "mx2", "mx3", "mx4"})));
REQUIRE_NOTHROW(state_machine.AddDetectorSetup(DetDECTRIS(23,45, "Det3", {"mx5"})));
auto dl = state_machine.GetDetectorsList();
REQUIRE(dl.detector.size() == 3);
REQUIRE(dl.detector[0].description == "Det1");
REQUIRE(dl.detector[0].nmodules == 4);
REQUIRE(dl.detector[0].detector_type == DetectorType::JUNGFRAU);
REQUIRE(dl.detector[1].description == "Det2");
REQUIRE(dl.detector[1].nmodules == 2);
REQUIRE(dl.detector[1].detector_type == DetectorType::EIGER);
REQUIRE(dl.detector[2].description == "Det3");
REQUIRE(dl.detector[2].nmodules == 1);
REQUIRE(dl.detector[2].detector_type == DetectorType::DECTRIS);
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
REQUIRE(state_machine.Experiment().GetModulesNum() == 4);
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
REQUIRE_THROWS(state_machine.SelectDetector(7));
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
REQUIRE_NOTHROW(state_machine.SelectDetector(2));
REQUIRE(state_machine.Experiment().GetModulesNum() == 1);
REQUIRE(state_machine.Experiment().GetDetectorDescription() == "Det3");
REQUIRE(state_machine.GetStatus().state == JFJochState::Inactive);
}
TEST_CASE("JFJochStateMachine_LoadDetectorSettings_Error") {
Logger logger("JFJochStateMachine_LoadDetectorSettings_Error");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
DatasetSettings setup;
state_machine.DebugOnly_SetState(JFJochState::Idle);
DetectorSettings settings;
settings.FrameTime(std::chrono::microseconds(1));
REQUIRE_THROWS(state_machine.LoadDetectorSettings(settings));
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
}
namespace {
// Stands in for a writer that refuses to start the run - e.g. the output file exists and cannot be
// overwritten. The refusal reaches the broker as an ordinary exception thrown while the start
// message is being sent, which is what separates it from a critical detector fault.
class RefusingImagePusher : public ImagePusher {
public:
bool refuse = true;
void StartDataCollection(StartMessage &) override {
if (refuse)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "writer_refused_1234");
}
bool EndDataCollection(const EndMessage &) override { return true; }
bool SendImage(const uint8_t *, size_t, int64_t) override { return true; }
bool SendCalibration(const CompressedImage &) override { return true; }
std::string PrintSetup() const override { return "RefusingImagePusher"; }
ImagePusherType GetType() const override { return ImagePusherType::Test; }
};
}
// An asynchronous start returns before the measurement thread runs, so a failure there has to be
// reported to whoever asks next. Without this the state is a plain Idle, indistinguishable from a
// timeout, and the writer's message is lost.
TEST_CASE("JFJochStateMachine_AsyncStartFailure") {
Logger logger("JFJochStateMachine_AsyncStartFailure");
DiffractionExperiment experiment(DetJF(2));
experiment.Conversion().PedestalG0Frames(0).NumTriggers(1).UseInternalPacketGenerator(true)
.ImagesPerTrigger(4).IncidentEnergy_keV(12.4);
AcquisitionDeviceGroup aq_devices;
for (int i = 0; i < experiment.GetDataStreamsNum(); i++)
aq_devices.Add(std::make_unique<HLSSimulatedDevice>(i, 64));
RefusingImagePusher pusher;
JFJochReceiverService receiver_service(aq_devices, logger, pusher);
JFJochServices services(logger);
services.Receiver(&receiver_service);
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF(2));
state_machine.DebugOnly_SetState(JFJochState::Idle);
DatasetSettings setup;
setup.ImagesPerTrigger(4).NumTriggers(1);
// The asynchronous start itself succeeds - it only launches the measurement thread.
REQUIRE_NOTHROW(state_machine.Start(setup, true));
// Both wait functions report the failure, and repeatedly: the exception_ptr is not consumed.
REQUIRE_THROWS_WITH(state_machine.WaitTillNotBusy(std::chrono::seconds(10)),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
REQUIRE_THROWS_WITH(state_machine.WaitTillNotBusy(std::chrono::seconds(10)),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
REQUIRE_THROWS_WITH(state_machine.WaitTillMeasurementDone(std::chrono::seconds(10)),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
// An ordinary failure leaves the detector usable, so the run can be retried from Idle. The
// status keeps the writer's message, and nothing is left of the run that never happened - a
// progress figure in particular would show up in the frontend as a stalled acquisition.
auto status = state_machine.GetStatus();
REQUIRE(status.state == JFJochState::Idle);
REQUIRE(status.message_severity == BrokerStatus::MessageSeverity::Error);
REQUIRE_THAT(status.message.value_or(""), Catch::Matchers::ContainsSubstring("writer_refused_1234"));
REQUIRE_FALSE(status.progress.has_value());
auto statistics = state_machine.GetMeasurementStatistics();
REQUIRE(statistics.has_value());
REQUIRE(statistics->images_collected == 0);
REQUIRE(statistics->images_sent == 0);
REQUIRE_FALSE(statistics->collection_efficiency.has_value());
// A synchronous start reports the same failure directly, and leaves it visible to the wait
// functions afterwards.
REQUIRE_THROWS_WITH(state_machine.Start(setup),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
REQUIRE_THROWS_WITH(state_machine.WaitTillNotBusy(std::chrono::seconds(10)),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
// A start rejected before the measurement thread is launched must not leave the previous
// failure behind for the next wait call to report.
DatasetSettings rejected_setup;
rejected_setup.ImagesPerTrigger(4).NumTriggers(1)
.ImageTime(state_machine.Experiment().GetFrameTime() + std::chrono::nanoseconds(1));
REQUIRE_THROWS(state_machine.Start(rejected_setup, true));
REQUIRE_NOTHROW(state_machine.WaitTillNotBusy(std::chrono::seconds(10)));
// Any other operation started from Idle supersedes the pending failure - it must not be
// attributed to the pedestal, which is allowed from Idle and has nothing to do with it.
REQUIRE_THROWS_WITH(state_machine.Start(setup),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
REQUIRE_NOTHROW(state_machine.Pedestal());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
// Nothing is left half-started: once the writer accepts the run, the next start goes through
// and completes without any intervening re-initialisation.
pusher.refuse = false;
REQUIRE_NOTHROW(state_machine.Start(setup));
REQUIRE(state_machine.GetStatus().state == JFJochState::Measuring);
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
REQUIRE(state_machine.GetMeasurementStatistics()->images_sent == 4);
// Re-initialising discards a pending failure too, so a detector brought back up does not report
// the failure of the run before it.
pusher.refuse = true;
REQUIRE_THROWS_WITH(state_machine.Start(setup),
Catch::Matchers::ContainsSubstring("writer_refused_1234"));
services.Receiver(nullptr);
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
}
// A calibration that does not complete must not be reported as a good one. Every step signals
// failure by calling SetState and returning normally, so nothing threw and the sequence used to
// finish with an unconditional "Calibration sequence done"/Success on top of it - leaving the
// broker Idle and apparently ready while holding partial pedestals.
TEST_CASE("JFJochStateMachine_CalibrationFailure") {
Logger logger("JFJochStateMachine_CalibrationFailure");
JFJochServices services(logger);
DiffractionExperiment experiment;
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF4M());
// Ask for a G0 pedestal. There is no receiver, so no frames come back and the import fails -
// the same outcome as a pedestal that collected nothing on real hardware.
DetectorSettings settings = state_machine.GetDetectorSettings();
settings.PedestalG0Frames(100);
REQUIRE_NOTHROW(state_machine.LoadDetectorSettings(settings));
REQUIRE_NOTHROW(state_machine.Initialize());
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
// Error, not Idle: the calibration is undefined, so the detector has to be initialized again
// rather than looking ready to measure. Error and not Inactive, so that the wait calls report
// the reason instead of the bodiless answer a deliberate power-off leaves behind.
auto status = state_machine.GetStatus();
REQUIRE(status.state == JFJochState::Error);
REQUIRE(status.message_severity == BrokerStatus::MessageSeverity::Error);
REQUIRE(status.message == "Pedestal not collected properly");
// ... and a data collection is refused on it, instead of producing mis-converted images.
DatasetSettings setup;
REQUIRE_THROWS(state_machine.Start(setup));
// The success path is unchanged - with no pedestal to take, the sequence still reports success.
JFJochStateMachine calibrated(experiment, services, logger);
calibrated.AddDetectorSetup(DetJF4M());
REQUIRE_NOTHROW(calibrated.Initialize());
REQUIRE_NOTHROW(calibrated.WaitTillMeasurementDone());
REQUIRE(calibrated.GetStatus().state == JFJochState::Idle);
REQUIRE(calibrated.GetStatus().message_severity == BrokerStatus::MessageSeverity::Success);
}
namespace {
// Holds the run open until the test lets go, so a cancel lands while the collection is running
// instead of racing its end.
class GatedPusher : public ImagePusher {
std::atomic<bool> released{true};
public:
void Hold() { released = false; }
void Release() { released = true; }
void StartDataCollection(StartMessage &) override {}
bool EndDataCollection(const EndMessage &) override { return true; }
bool SendImage(const uint8_t *, size_t, int64_t) override {
while (!released)
std::this_thread::sleep_for(1ms);
return true;
}
bool SendCalibration(const CompressedImage &) override { return true; }
std::string PrintSetup() const override { return "GatedPusher"; }
ImagePusherType GetType() const override { return ImagePusherType::Test; }
};
// A writer that cannot finish the run - a rename that collides, a disk that filled up. It
// reaches the state machine from Stop(), not from Start(), which is the case that used to be
// reported as a run without problems.
class FinalizeFailingPusher : public ImagePusher {
public:
void StartDataCollection(StartMessage &) override {}
bool EndDataCollection(const EndMessage &) override { return true; }
bool SendImage(const uint8_t *, size_t, int64_t) override { return true; }
bool SendCalibration(const CompressedImage &) override { return true; }
std::string Finalize() override {
throw JFJochException(JFJochExceptionCategory::FileWriteError, "writer_finalize_failed_9876");
}
std::string PrintSetup() const override { return "FinalizeFailingPusher"; }
ImagePusherType GetType() const override { return ImagePusherType::Test; }
};
}
// /wait_till_done reads the severity of the end-of-run message to decide between 200 and 500, so
// what the state machine puts there is what a script sees. A cancelled collection must not be an
// error: it is incomplete by definition - the packets it never received would otherwise report
// themselves - and calling every cancel a failure would make the endpoint useless.
TEST_CASE("JFJochStateMachine_CancelledRunIsNotAnError") {
Logger logger("JFJochStateMachine_CancelledRunIsNotAnError");
DiffractionExperiment experiment(DetJF(2));
experiment.Conversion().PedestalG0Frames(0).NumTriggers(1).UseInternalPacketGenerator(true)
.ImagesPerTrigger(8).IncidentEnergy_keV(12.4);
AcquisitionDeviceGroup aq_devices;
for (int i = 0; i < experiment.GetDataStreamsNum(); i++)
aq_devices.Add(std::make_unique<HLSSimulatedDevice>(i, 64));
GatedPusher pusher;
JFJochReceiverService receiver_service(aq_devices, logger, pusher);
JFJochServices services(logger);
services.Receiver(&receiver_service);
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF(2));
state_machine.DebugOnly_SetState(JFJochState::Idle);
DatasetSettings setup;
setup.ImagesPerTrigger(8).NumTriggers(1);
// A run that finished properly is a Success, so /wait_till_done answers 200.
REQUIRE_NOTHROW(state_machine.Start(setup));
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
REQUIRE(state_machine.GetStatus().state == JFJochState::Idle);
REQUIRE(state_machine.GetStatus().message_severity == BrokerStatus::MessageSeverity::Success);
// The same run cancelled halfway. The gate keeps it running until the cancel is in.
pusher.Hold();
REQUIRE_NOTHROW(state_machine.Start(setup, true));
for (int i = 0; i < 400 && state_machine.GetStatus().state != JFJochState::Measuring; i++)
std::this_thread::sleep_for(25ms);
REQUIRE(state_machine.GetStatus().state == JFJochState::Measuring);
state_machine.Cancel();
pusher.Release();
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
auto status = state_machine.GetStatus();
REQUIRE(status.state == JFJochState::Idle);
// Info, not Error and not Warning: the collection did what it was told to do.
REQUIRE(status.message_severity == BrokerStatus::MessageSeverity::Info);
REQUIRE_THAT(status.message.value_or(""), Catch::Matchers::ContainsSubstring("cancelled"));
// The run really was short - what makes this test worth having is that the incompleteness did
// not get reported ahead of the cancel.
REQUIRE(state_machine.GetMeasurementStatistics()->cancelled);
}
// A writer that failed while the run was being finalized arrives from Stop(), which leaves the
// state Idle - the detector is still usable - and says so only in the severity. /wait_till_done
// turns that into a 500 with the writer's message rather than reporting a good collection.
TEST_CASE("JFJochStateMachine_WriterFailureAtEndIsAnError") {
Logger logger("JFJochStateMachine_WriterFailureAtEndIsAnError");
DiffractionExperiment experiment(DetJF(2));
experiment.Conversion().PedestalG0Frames(0).NumTriggers(1).UseInternalPacketGenerator(true)
.ImagesPerTrigger(4).IncidentEnergy_keV(12.4);
AcquisitionDeviceGroup aq_devices;
for (int i = 0; i < experiment.GetDataStreamsNum(); i++)
aq_devices.Add(std::make_unique<HLSSimulatedDevice>(i, 64));
FinalizeFailingPusher pusher;
JFJochReceiverService receiver_service(aq_devices, logger, pusher);
JFJochServices services(logger);
services.Receiver(&receiver_service);
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF(2));
state_machine.DebugOnly_SetState(JFJochState::Idle);
DatasetSettings setup;
setup.ImagesPerTrigger(4).NumTriggers(1);
REQUIRE_NOTHROW(state_machine.Start(setup, true));
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone());
auto status = state_machine.GetStatus();
REQUIRE(status.state == JFJochState::Idle);
REQUIRE(status.message_severity == BrokerStatus::MessageSeverity::Error);
REQUIRE_THAT(status.message.value_or(""),
Catch::Matchers::ContainsSubstring("writer_finalize_failed_9876"));
}
namespace {
// Refuses the run before it starts, the way a writer refuses to overwrite a file that is
// already there. Records whether the collection was started anyway.
class PreflightRefusingPusher : public ImagePusher {
public:
std::atomic<bool> start_called{false};
void Preflight(StartMessage &) override {
throw JFJochException(JFJochExceptionCategory::FileWriteError, "preflight_refused_2468");
}
void StartDataCollection(StartMessage &) override { start_called = true; }
bool EndDataCollection(const EndMessage &) override { return true; }
bool SendImage(const uint8_t *, size_t, int64_t) override { return true; }
bool SendCalibration(const CompressedImage &) override { return true; }
std::string PrintSetup() const override { return "PreflightRefusingPusher"; }
ImagePusherType GetType() const override { return ImagePusherType::Test; }
};
}
// The pre-flight is the first thing a measurement does, so a run the writer will not accept is
// refused before the receiver is built and before the detector is armed - which is what makes the
// refusal free: there is no series left armed and waiting for a trigger to tear down.
TEST_CASE("JFJochStateMachine_PreflightRefusesBeforeStarting") {
Logger logger("JFJochStateMachine_PreflightRefusesBeforeStarting");
DiffractionExperiment experiment(DetJF(2));
experiment.Conversion().PedestalG0Frames(0).NumTriggers(1).UseInternalPacketGenerator(true)
.ImagesPerTrigger(4).IncidentEnergy_keV(12.4).FilePrefix("preflight_refused");
AcquisitionDeviceGroup aq_devices;
for (int i = 0; i < experiment.GetDataStreamsNum(); i++)
aq_devices.Add(std::make_unique<HLSSimulatedDevice>(i, 64));
PreflightRefusingPusher pusher;
JFJochReceiverService receiver_service(aq_devices, logger, pusher);
JFJochServices services(logger);
services.Receiver(&receiver_service);
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetJF(2));
state_machine.DebugOnly_SetState(JFJochState::Idle);
DatasetSettings setup;
setup.ImagesPerTrigger(4).NumTriggers(1).FilePrefix("preflight_refused");
// A synchronous start reports the writer's own message.
REQUIRE_THROWS_WITH(state_machine.Start(setup),
Catch::Matchers::ContainsSubstring("preflight_refused_2468"));
REQUIRE_FALSE(pusher.start_called);
// An ordinary failure, so the detector stays usable and the run can be retried from Idle.
auto status = state_machine.GetStatus();
REQUIRE(status.state == JFJochState::Idle);
REQUIRE(status.message_severity == BrokerStatus::MessageSeverity::Error);
// The asynchronous start returns, and the wait functions report it.
REQUIRE_NOTHROW(state_machine.Start(setup, true));
REQUIRE_THROWS_WITH(state_machine.WaitTillNotBusy(10s),
Catch::Matchers::ContainsSubstring("preflight_refused_2468"));
REQUIRE_THROWS_WITH(state_machine.WaitTillMeasurementDone(10s),
Catch::Matchers::ContainsSubstring("preflight_refused_2468"));
REQUIRE_FALSE(pusher.start_called);
}
namespace {
class NullPusher : public ImagePusher {
public:
void StartDataCollection(StartMessage &) override {}
bool EndDataCollection(const EndMessage &) override { return true; }
bool SendImage(const uint8_t *, size_t, int64_t) override { return true; }
bool SendCalibration(const CompressedImage &) override { return true; }
std::string PrintSetup() const override { return "NullPusher"; }
ImagePusherType GetType() const override { return ImagePusherType::Test; }
};
}
// Cancelling the dark-mask collection - the window between the receiver being started and Stop()
// returning, which is where a calibration spends its time - must abandon the sequence. The mask
// analysis always hands back a full-size array, every pixel that saw no frame reading as good, so
// the size check the sequence relies on accepts a mask measured on nothing; and the dark mask is a
// single step, so no later cancel_sequence check catches it. The calibration used to end Idle with
// "Calibration sequence done" on a mask it never measured.
TEST_CASE("JFJochStateMachine_DarkMaskCancelIsNotASuccess") {
Logger logger("JFJochStateMachine_DarkMaskCancelIsNotASuccess");
DarkMaskSettings mask_settings;
mask_settings.NumberOfFrames(100).MaxCounts(1).MaxFramesWithCounts(5);
// Nothing listens on the stream address, so no start message ever arrives and the collection
// stays in the window under test until it is cancelled.
DiffractionExperiment experiment(DetDECTRIS(1024, 1024, "Test", "127.0.0.1"));
experiment.ImportDarkMaskSettings(mask_settings);
AcquisitionDeviceGroup aq_devices;
NullPusher pusher;
JFJochReceiverService receiver_service(aq_devices, logger, pusher);
JFJochServices services(logger);
services.Receiver(&receiver_service);
JFJochStateMachine state_machine(experiment, services, logger);
state_machine.AddDetectorSetup(DetDECTRIS(1024, 1024, "Test", "127.0.0.1"));
state_machine.DebugOnly_SetState(JFJochState::Idle);
REQUIRE_NOTHROW(state_machine.Pedestal());
for (int i = 0; i < 400 && state_machine.GetStatus().state != JFJochState::Calibration; i++)
std::this_thread::sleep_for(25ms);
REQUIRE(state_machine.GetStatus().state == JFJochState::Calibration);
state_machine.Cancel();
REQUIRE_NOTHROW(state_machine.WaitTillMeasurementDone(std::chrono::seconds(30)));
auto status = state_machine.GetStatus();
REQUIRE(status.state != JFJochState::Idle);
REQUIRE(status.message_severity == BrokerStatus::MessageSeverity::Error);
REQUIRE_THAT(status.message.value_or(""), Catch::Matchers::ContainsSubstring("cancelled"));
}