leonarski_fandClaude Fable 5
70c4d871b6
- Capitalize Rugnux as a proper noun throughout the prose; the command stays lowercase `rugnux` in code font. RUGNUX_OVERVIEW.md is retitled "What Rugnux does". - ACKNOWLEDGEMENT.md cites the raw-data repositories only: dataset counts and DOI prefixes moved out (EXTERNAL_TEST_DATA.md owns them), the ESRF data portal gains its citation (Dimper et al. 2019), and MXRDR remains name + link - it has no canonical citation paper. - RUGNUX_FORMATS.md: the CCD formats (marCCD, SMV) are supported as-is with very limited scope, and per-panel XFEL data is not read. - Fix wrong facts a reader would act on: nonexistent `make jfjoch` targets, invalid udev rules, PUSH sockets documented as PULL, swapped writer width/height, underload semantics, the transposed pixel-mask numpy example (the server checks width and height separately), the Durin/Neggia mask-bit table, FPGA threshold register addresses and the mailbox bit field, the I2C core's document number (PG090), an inverted MODEL_FIT_SIGMA formula, a self-inconsistent worked report example, and 11 cross-page anchors whose slugs carry MyST section numbers. - Unify CC1/2 spelling in prose; math notation and report keys unchanged. - Sweep grammar, typos and editing residue across the FPGA, deployment, streaming and analysis pages, including historical CHANGELOG typos. - rugnux_cli.cpp: the -S usage/error examples pair 96 with P43212; 92 names a different group. - Root THIRD_PARTY_NOTICES.md: scope the GPL-compatibility claim (CUDA EULA) and the vendored-table intro (traccc); the docs copy regenerates via update_version.sh. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
937 B
Supported detectors
PSI detectors
Jungfraujoch supports PSI JUNGFRAU and PSI EIGER detectors. Jungfraujoch controls the detector via slsDetectorPackage, which is statically compiled into its source code.
The detector firmware must match the slsDetectorPackage version used in Jungfraujoch.
The default is 8.0.2; 9.2.0 is built with the SLS9=ON CMake option and published in the slsdet9
package repositories.
See PSI Detector group website for details.
DECTRIS detectors
Jungfraujoch can be used with DECTRIS detectors, as a data analysis tool. In this solution Jungfraujoch controls the Detector Control Unit (DCU) of the detector, and handles the output data stream of the DCU. This mode, called "lite" mode, doesn't use FPGA boards, but mostly CPUs and GPUs for indexing. The mode is currently experimental and intended for low data rates (100 Hz).