Files
Jungfraujoch/common/ScalingSettings.cpp
leonarski_fandClaude Opus 4.8 fbebc0d56e rugnux: run decay + absorption surfaces on the GPU and enable by default
The decay/absorption correction surfaces previously forced the CPU 3D
combine (absorption needs each full's predicted detector position, which
the GPU SoA did not carry), so they could not be default-on without losing
the fast GPU path. Put them on the GPU:

- carry px/py (peak partial) through the GPU combine and download them with
  the fulls (GetFullsPxPy);
- add SetFullsCorr to re-upload the host-corrected corr to the resident
  fulls before the merge.

The surfaces themselves stay as cheap host fits on the downloaded fulls;
only px/py download + corr upload are added (~two O(n_fulls) transfers).
Measured +2% wall-time on lyso_ref (9.7 -> 9.9 s), and the GPU-combine and
CPU-combine (--dump-observations) paths give identical results.

Enable by default via a single master toggle ScalingSettings::
CorrectionSurfaces (default true; decoupled from the stills-only -B, which
is rejected for rotation again). Both surfaces are cross-validated, so they
no-op where their systematic is absent - safe to leave on. Off-switch wired
through the rugnux CLI (--no-scaling-corrections; --absorption removed) and
the viewer (a "Correction surfaces" checkbox). Documented in docs/RUGNUX.md.

Battery (24 rotation crystals), default-on vs --no-scaling-corrections:
EcwtCQ066S +2.4 ISa, lyso_ref +0.5 (and R-free 0.194 -> 0.185, better than
XDS); every other crystal within run-to-run noise; corrections skip (CV /
dB-floor) wherever there is no signal. lyso_ref anomalous S/Cl peaks are
already ~45% above XDS's - the ISa gap is metric convention, not data.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-12 10:56:39 +02:00

267 lines
7.5 KiB
C++

// SPDX-FileCopyrightText: 2026 Filip Leonarski, Paul Scherrer Institute <filip.leonarski@psi.ch>
// SPDX-License-Identifier: GPL-3.0-only
#include "ScalingSettings.h"
ScalingSettings& ScalingSettings::RefineB(bool input) {
refine_b = input;
return *this;
}
ScalingSettings& ScalingSettings::MergeFriedel(bool input) {
merge_friedel = input;
return *this;
}
ScalingSettings& ScalingSettings::HighResolutionLimit_A(double limit) {
if (limit <= 0.0)
throw JFJochException(JFJochExceptionCategory::InputParameterBelowMin, "High resolution limit must be positive");
high_resolution_limit_A = limit;
return *this;
}
ScalingSettings& ScalingSettings::HighResolutionLimit_A(std::optional<double> limit) {
if (limit.has_value() && limit.value() <= 0.0)
throw JFJochException(JFJochExceptionCategory::InputParameterBelowMin, "High resolution limit must be positive");
high_resolution_limit_A = limit;
return *this;
}
bool ScalingSettings::GetRefineB() const {
return refine_b;
}
bool ScalingSettings::GetMergeFriedel() const {
return merge_friedel;
}
ScalingSettings &ScalingSettings::RefineRotationWedge(bool input) {
refine_wedge = input;
return *this;
}
bool ScalingSettings::GetRefineWedge() const {
return refine_wedge;
}
std::optional<double> ScalingSettings::GetHighResolutionLimit_A() const {
return high_resolution_limit_A;
}
double ScalingSettings::GetMinB() const {
return min_b;
}
double ScalingSettings::GetMaxB() const {
return max_b;
}
double ScalingSettings::GetMinMosaicity() const {
return 0.001;
}
double ScalingSettings::GetMaxMosaicity() const {
return 1.0;
}
double ScalingSettings::GetMinWedge() const {
return 0.001;
}
double ScalingSettings::GetMaxWedge() const {
return 10.0;
}
double ScalingSettings::GetDefaultMosaicity() const {
return 0.1;
}
ScalingSettings &ScalingSettings::RotationWedgeForScaling(std::optional<double> input) {
if (input) {
// TODO: Use fmt
if (input.value() < GetMinWedge() || input.value() > GetMaxWedge())
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Wedge for scaling must be between " + std::to_string(GetMinWedge()) +
" and " + std::to_string(GetMaxWedge()));
}
wedge_for_scaling = input;
return *this;
}
std::optional<double> ScalingSettings::GetRotationWedgeForScaling() const {
return wedge_for_scaling;
}
ScalingSettings &ScalingSettings::MinPartiality(double input) {
if (min_partiality < 0.0 || min_partiality > 1.0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "Min partiality must be between 0 and 1");
min_partiality = input;
return *this;
}
double ScalingSettings::GetMinCCForImage() const {
return min_cc_for_image;
}
ScalingSettings &ScalingSettings::MinCCForImage(double input) {
if (input < 0.0 || input > 1.0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "Min CC for image must be between 0 and 1");
min_cc_for_image = input;
return *this;
}
double ScalingSettings::GetOutlierRejectNsigma() const {
return outlier_reject_nsigma;
}
ScalingSettings &ScalingSettings::OutlierRejectNsigma(double input) {
outlier_reject_nsigma = input; // <= 0 disables; no upper bound (large = effectively off)
return *this;
}
ScalingSettings &ScalingSettings::ScaleFulls(bool input) {
scale_fulls = input;
return *this;
}
bool ScalingSettings::GetScaleFulls() const {
return scale_fulls;
}
ScalingSettings &ScalingSettings::AbsorptionIter(int input) {
if (input < 0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "Absorption iterations must be non-negative");
absorption_iter = input;
return *this;
}
int ScalingSettings::GetAbsorptionIter() const {
return absorption_iter;
}
ScalingSettings &ScalingSettings::CorrectionSurfaces(bool input) {
correction_surfaces = input;
return *this;
}
bool ScalingSettings::GetCorrectionSurfaces() const {
return correction_surfaces;
}
ScalingSettings &ScalingSettings::SmoothGDegrees(double input) {
if (input < 0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "Smooth-G range must be non-negative");
smooth_g_deg = input;
return *this;
}
double ScalingSettings::GetSmoothGDegrees() const {
return smooth_g_deg;
}
double ScalingSettings::GetMinPartiality() const {
return min_partiality;
}
ScalingSettings &ScalingSettings::ForcedMosaicity(std::optional<double> input) {
if (input.has_value() && (input.value() < GetMinMosaicity() || input.value() > GetMaxMosaicity()))
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Forced mosaicity must be between " + std::to_string(GetMinMosaicity()) +
" and " + std::to_string(GetMaxMosaicity()));
forced_mosaicity = input;
return *this;
}
std::optional<double> ScalingSettings::GetForcedMosaicity() const {
return forced_mosaicity;
}
ScalingSettings &ScalingSettings::CaptureUncertaintyCoeff(double input) {
if (input < 0.0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Capture uncertainty coefficient must be non-negative");
capture_uncertainty_coeff = input;
return *this;
}
double ScalingSettings::GetCaptureUncertaintyCoeff() const {
return capture_uncertainty_coeff;
}
ScalingSettings &ScalingSettings::MinCapturedFraction(double input) {
if (input < 0.0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Minimum captured fraction must be non-negative");
min_captured_fraction = input;
return *this;
}
double ScalingSettings::GetMinCapturedFraction() const {
return min_captured_fraction;
}
ScalingSettings &ScalingSettings::FileFormat(IntensityFormat input) {
intensity_format = input;
return *this;
}
IntensityFormat ScalingSettings::GetFileFormat() const {
return intensity_format;
}
ScalingSettings &ScalingSettings::RfreeFraction(double input) {
if (input < 0.0 || input > 1.0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "R-free fraction must be between 0 and 1");
rfree_fraction = input;
return *this;
}
double ScalingSettings::GetRfreeFraction() const {
return rfree_fraction;
}
ScalingSettings &ScalingSettings::ScalingRegularize(bool input) {
scaling_regularize = input;
return *this;
}
bool ScalingSettings::GetScalingRegularize() const {
return scaling_regularize;
}
ScalingSettings &ScalingSettings::ResolutionCutoff(ResolutionCutoffMethod input) {
resolution_cutoff = input;
return *this;
}
ResolutionCutoffMethod ScalingSettings::GetResolutionCutoff() const {
return resolution_cutoff;
}
ScalingSettings &ScalingSettings::ResolutionCCTarget(double input) {
if (input <= 0.0 || input >= 1.0)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Resolution CC target must be between 0 and 1");
resolution_cc_target = input;
return *this;
}
double ScalingSettings::GetResolutionCCTarget() const {
return resolution_cc_target;
}
ScalingSettings &ScalingSettings::ReportShellCount(int input) {
if (input < 1)
throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
"Number of report shells must be at least 1");
report_shell_count = input;
return *this;
}
int ScalingSettings::GetReportShellCount() const {
return report_shell_count;
}