# PowderCalibrationQuality

What a powder calibration knows about the geometry it produced. A calibration that has gone wrong - the wrong standard named, a header too far out for the rings to be found - looks exactly like one that has not until these are read. 

## Properties

Name | Type | Description | Notes
------------ | ------------- | ------------- | -------------
**converged** | **bool** | Whether the geometry beside this is a measurement of the data at all. False means at least one of its parameters was carried over from the input file rather than fitted - which looks exactly like a good fit in every other field here - and see not_converged_reason for which. rugnux --mode calibration writes no .poni file in that case, a PONI file having no field in which to say it, and exits non-zero.  | [optional] 
**not_converged_reason** | **str** | What made converged false, in words. Absent when the calibration converged. | [optional] 
**calibrant** | **str** | The powder standard the rings were fitted to, or the unit cell given in its place | [optional] 
**method** | **str** | How the rings were measured. rings fits the arcs of the run-summed (q x azimuth) azimuthal profile; spots fits the pooled per-image spot lists.  | [optional] 
**ring_points** | **int** | Ring measurements the fit used | [optional] 
**rms_radial_pxl** | **float** | Scatter of those measurements about the fitted rings, as a radial distance [pixels]. The single number that separates a calibration that worked from one that did not.  | [optional] 
**beam_sigma_pxl** | **float** | Standard error the scatter implies on the beam centre [pixels], for a ring of that many points. See powder_calibration_fit_sigma for what the fit itself says, which is not the same and is the larger of the two whenever the tilt is poorly separated.  | [optional] 
**direct_beam_x_pxl** | **float** | Where the direct beam lands [pixels]. NOT dataset_settings.beam_x_pxl, which is the PONI: the two part company by distance*tan(tilt)/pixel as soon as the detector is tilted.  | [optional] 
**direct_beam_y_pxl** | **float** | Where the direct beam lands, y [pixels] | [optional] 
**header_distance_mm** | **float** | The detector distance the input file declared, for comparison [mm] | [optional] 
**ring_seed_distance_mm** | **float** | The distance measured from the ring radii before the fit ran [mm]. It is taken from the radii, the wavelength and the pixel size alone, so a large gap from header_distance_mm is the answer to the question the calibration was run to ask. Absent when the profile showed too few rings to fix a scale.  | [optional] 
**tilt_refined** | **bool** | Whether the reported rot1/rot2 were measured by this fit. False means they were declined and pinned at the input file's values, because the rings could not separate a tilt from a shift of the beam centre.  | [optional] 
**tilt_significance** | **float** | How many of its own sigmas the fitted tilt stands from zero. Below about 3 it is not a measurement of a tilt but of a beam-centre shift, and the tilt is declined. Passing does not certify a tilt: that estimator is limited by systematics rather than by this sigma.  | [optional] 
**fit_sigma** | [**PowderCalibrationFitSigma**](PowderCalibrationFitSigma.md) |  | [optional] 
**spot_cross_check** | [**PowderCalibrationSpotCheck**](PowderCalibrationSpotCheck.md) |  | [optional] 

## Example

```python
from jfjoch_client.models.powder_calibration_quality import PowderCalibrationQuality

# TODO update the JSON string below
json = "{}"
# create an instance of PowderCalibrationQuality from a JSON string
powder_calibration_quality_instance = PowderCalibrationQuality.from_json(json)
# print the JSON string representation of the object
print(PowderCalibrationQuality.to_json())

# convert the object into a dict
powder_calibration_quality_dict = powder_calibration_quality_instance.to_dict()
# create an instance of PowderCalibrationQuality from a dict
powder_calibration_quality_from_dict = PowderCalibrationQuality.from_dict(powder_calibration_quality_dict)
```
[[Back to Model list]](../README.md#documentation-for-models) [[Back to API list]](../README.md#documentation-for-api-endpoints) [[Back to README]](../README.md)