# Ubuntu 22.04 (Jammy) base with CUDA 13 devel toolchain
FROM nvidia/cuda:13.0.1-devel-ubuntu22.04
LABEL authors="leonarski_f"

ENV DEBIAN_FRONTEND=noninteractive

ARG OPENSSL_VERSION=3.5.4
ARG QT_VERSION=6.11.1
ARG DBUS_VERSION=1.14.10
ARG NODE_MAJOR=22
ARG EIGEN_VERSION=3.4.0
# HDF5, libtiff and libjpeg-turbo are built by the jungfraujoch CMake itself (FetchContent /
# ExternalProject). Eigen is an external find_package(Eigen3 3.4) dependency, installed from source
# below (3.4.x is required; Eigen's same-major-version rule rejects 5.x).

# Update base and install toolchain + Qt dependencies
# Notes:
# - GCC/G++ 13 are installed from jammy-backports
# - XCB/X11/OpenGL/EGL/DBus/fontconfig/freetype/zlib headers installed for building static Qt
RUN set -eux; \
    apt-get update; \
    apt-get install -y --no-install-recommends \
      ca-certificates \
      curl \
      wget \
      gpg \
      git \
      tar \
      xz-utils \
      build-essential \
      python3 \
      python3-venv \
      python3-requests \
      perl \
      pkg-config \
      gdb \
      file \
      nasm \
      python3.11 \
      python3.11-venv \
      dpkg-dev \
      fakeroot \
      libnuma-dev \
      libkrb5-dev \
      libxcb1-dev \
      libx11-dev \
      libxext-dev \
      libxrender-dev \
      libxi-dev \
      libxrandr-dev \
      libxcursor-dev \
      libxfixes-dev \
      libxinerama-dev \
      libxkbcommon-dev \
      libxkbcommon-x11-dev \
      libx11-xcb-dev \
      libxcb-image0-dev \
      libxcb-icccm4-dev \
      libxcb-keysyms1-dev \
      libxcb-render-util0-dev \
      libxcb-util-dev \
      libxcb-randr0-dev \
      libxcb-xkb-dev \
      libxcb-shm0-dev \
      libxcb-cursor0 \
      libxcb-cursor-dev \
      libxcb-shape0-dev \
      libxcb-sync-dev \
      libxcb-xfixes0-dev \
      libxcb-glx0-dev \
      libgl1-mesa-dev \
      libglx-dev \
      libegl1-mesa-dev \
      libexpat1-dev \
      zlib1g-dev \
      libfontconfig1-dev \
      libdrm-dev \
      mesa-utils \
      libassimp-dev \
      libglvnd-dev \
      libfreetype6-dev; \
    apt-get -y install gcc-12 g++-12; \
    apt-get clean; \
    rm -rf /var/lib/apt/lists/*

# Git over HTTP/1.1: the HTTP/2 multiplexing used by default makes clones from some servers
# (and through the PSI proxy) fail mid-transfer with "RPC failed; curl 92 HTTP/2 stream ... not
# closed cleanly". Every source dependency below and the project's own FetchContent step clone over
# HTTPS, so set this system-wide for the image.
RUN git config --system http.version HTTP/1.1

# Use GCC/G++ 12 for builds
ENV CC=/usr/bin/gcc-12
ENV CXX=/usr/bin/g++-12

# Build a static OpenSSL
# Everything built from source below is identical in all four build images, so it lives in
# docker/common/ and is run from there -- one copy to change, not four. The build context is
# docker/ (see build_images.sh), which is what puts common/ in reach of this COPY.
ARG CMAKE_VERSION=3.31.8
ARG CMAKE_SHA256=630615d8e98ac33eba7fbe472626dff5c899c85af3c024585ae109166a6909d0
ARG NINJA_VERSION=1.13.2
ARG NINJA_SHA256=5749cbc4e668273514150a80e387a957f933c6ed3f5f11e03fb30955e2bbead6
COPY common/ /opt/jfjoch-common/
RUN /opt/jfjoch-common/install-cmake.sh
RUN /opt/jfjoch-common/install-ninja.sh
# Ahead of the distro path: these are the CMake and Ninja every later step and every CI build uses.
ENV PATH=/opt/cmake-${CMAKE_VERSION}/bin:/opt/ninja-${NINJA_VERSION}/bin:${PATH}

RUN /opt/jfjoch-common/build-openssl.sh

# Expose static OpenSSL to CMake/pkg-config
ENV OPENSSL_ROOT_DIR=/opt/openssl-${OPENSSL_VERSION}
ENV PKG_CONFIG_PATH=${OPENSSL_ROOT_DIR}/lib/pkgconfig:${OPENSSL_ROOT_DIR}/lib64/pkgconfig:${PKG_CONFIG_PATH}

# Install a recent Node.js (NodeSource)
RUN set -eux; \
    curl -fsSL https://deb.nodesource.com/setup_${NODE_MAJOR}.x | bash -; \
    apt-get update; \
    apt-get install -y --no-install-recommends nodejs; \
    apt-get clean; \
    rm -rf /var/lib/apt/lists/*; \
    node --version; npm --version; (corepack enable || true)

# Static libdbus: link D-Bus into the viewer (Qt6::DBus) instead of pulling libdbus-1.so.3 at runtime.
# A distro libdbus-1.so drags in libsystemd (-> libzstd/liblz4/libcap/libgcrypt/libgpg-error) and
# libselinux (-> libpcre2). Disabling those integrations makes libdbus-1.a depend on ~libc alone, so
# that whole runtime .so tail disappears while the viewer keeps its single-instance / remote-control
# D-Bus feature -- it is a pure session-bus client (registers a name + exports an adaptor), so the
# daemon-side systemd/selinux features are irrelevant. Static-only install (no .so); the Qt build
# finds it through find_package(DBus1) via the -DDBus1_DIR hint (the CMake package config dbus
# installs, which imports libdbus-1.a). Built -fPIC (--with-pic) so the archive links into Qt's PIE
# tools (qdbusxml2cpp). expat is only a configure-time dep of the dbus daemon; the client libdbus-1
# links neither expat nor systemd.
RUN /opt/jfjoch-common/build-dbus.sh

# Put the static libdbus pkgconfig ahead of the system one so Qt6::DBus resolves to the .a
ENV PKG_CONFIG_PATH=/opt/dbus-${DBUS_VERSION}-static/lib/pkgconfig:${PKG_CONFIG_PATH}

# Build and install static Qt with Core, Gui, Widgets, Charts, DBus
ARG QT_PREFIX=/opt/qt-${QT_VERSION}-static
RUN /opt/jfjoch-common/build-qt.sh

# Eigen 3.4 (header-only) -- external find_package(Eigen3 3.4) dependency, installed to /opt/eigen-3.4.
RUN /opt/jfjoch-common/install-eigen.sh

# Make Qt, the static libdbus, and Eigen discoverable by CMake. The static libdbus prefix is
# required here (not only at Qt build time): every Qt6::DBus consumer re-runs find_package(DBus1)
# through Qt's exported config, so DBus1Config.cmake must be on CMAKE_PREFIX_PATH for the viewer build.
ENV CMAKE_PREFIX_PATH=/opt/qt-${QT_VERSION}-static:/opt/dbus-${DBUS_VERSION}-static:/opt/eigen-3.4

# Set workdir for your project
WORKDIR /workspace

# Default entrypoint: interactive shell
CMD ["/bin/bash", "-l"]

RUN rm -rf /opt/jfjoch-common