Server: updated server_exception_handler.py and also error_codes.py to cover all custom exceptions

src/aare/common/error_codes.py

@@ -30,6 +30,27 @@ class AuthErrorCode(StrEnum):
 
 class DAQErrorCode(StrEnum):
     BEAMLINE_BUSY = "BEAMLINE_BUSY"
+    MOUNTING_FAILED = "MOUNTING_FAILED"
+    UNMOUNTING_FAILED = "UNMOUNTING_FAILED"
+    LOOP_CENTERING_FAILED = "LOOP_CENTERING_FAILED"
+    AXC_FAILED = "AXC_FAILED"
+    TRANSFORMATION_INVALID = "TRANSFORMATION_INVALID"
+    SAMPLE_NOT_FOUND = "SAMPLE_NOT_FOUND"
+    DATA_COLLECTION_FAILED = "DATA_COLLECTION_FAILED"
+    RASTER_SCAN_FAILED = "RASTER_SCAN_FAILED"
+    TELL_WARNING = "TELL_WARNING"
+    TELL_CRITICAL = "TELL_CRITICAL"
+    SMARGON_UNAVAILABLE = "SMARGON_UNAVAILABLE"
+    TELL_UNAVAILABLE = "TELL_UNAVAILABLE"
+    TELL_CONNECTION_ERROR = "TELL_CONNECTION_ERROR"
+    TELL_MOUNT_FAILED = "TELL_MOUNT_FAILED"
+    TELL_BUSY = "TELL_BUSY"
+    MANUAL_MOUNT_REQUIRED = "MANUAL_MOUNT_REQUIRED"
+    SMART_MAGNET_FAULT = "SMART_MAGNET_FAULT"
+    JFJOCH_UNAVAILABLE = "JFJOCH_UNAVAILABLE"
+    AEROTECH_UNAVAILABLE = "AEROTECH_UNAVAILABLE"
+    AAREDB_UNAVAILABLE = "AAREDB_UNAVAILABLE"
+    MAGNET_POSITION_SENSOR_ERROR = "MAGNET_POSITION_SENSOR_ERROR"
 
 _ERROR_CODE_HELP: dict[str, str] = {
     # Auth/JWT
@@ -73,7 +94,70 @@ _ERROR_CODE_HELP: dict[str, str] = {
         "Beamline state is set to Busy by prior action. If this state persists an additional error may have occurred, "
         "preventing the state from being released, this should timeout within 10 minutes."
         "If this occurs please seek assistance from your local contact."
-    )
+    ),
+    DAQErrorCode.MOUNTING_FAILED: (
+        "The requested sample could not be mounted. Check TELL/robot state, sample location, and hardware readiness."
+    ),
+    DAQErrorCode.UNMOUNTING_FAILED: (
+        "The mounted sample could not be unmounted. Check robot state and whether the sample changer is ready."
+    ),
+    DAQErrorCode.LOOP_CENTERING_FAILED: (
+        "Automatic loop centering failed to locate or position the sample reliably."
+    ),
+    DAQErrorCode.AXC_FAILED: (
+        "Automatic X-ray centering failed. Verify sample visibility, alignment, and detector/beam conditions."
+    ),
+    DAQErrorCode.TRANSFORMATION_INVALID: (
+        "The requested beamline state transition is not allowed from the current state."
+    ),
+    DAQErrorCode.SAMPLE_NOT_FOUND: (
+        "The requested sample could not be found in the available sample lists."
+    ),
+    DAQErrorCode.DATA_COLLECTION_FAILED: (
+        "Rotation/data collection failed before a valid result was produced."
+    ),
+    DAQErrorCode.RASTER_SCAN_FAILED: (
+        "Raster scan failed before a valid result was produced."
+    ),
+    DAQErrorCode.TELL_WARNING: (
+        "TELL reported a warning condition. The request may not have completed cleanly."
+    ),
+    DAQErrorCode.TELL_CRITICAL: (
+        "TELL reported a critical error condition requiring operator attention."
+    ),
+    DAQErrorCode.SMARGON_UNAVAILABLE: (
+        "Smargon communication failed or the controller is unavailable."
+    ),
+    DAQErrorCode.TELL_UNAVAILABLE: (
+        "TELL communication failed or the service is unavailable."
+    ),
+    DAQErrorCode.TELL_CONNECTION_ERROR: (
+        "The server could not establish or maintain a connection to TELL."
+    ),
+    DAQErrorCode.TELL_MOUNT_FAILED: (
+        "TELL reported that the mount/unmount operation failed."
+    ),
+    DAQErrorCode.TELL_BUSY: (
+        "A TELL command was requested while TELL was still busy processing another action."
+    ),
+    DAQErrorCode.MANUAL_MOUNT_REQUIRED: (
+        "Automatic mounting could not proceed and manual intervention is required."
+    ),
+    DAQErrorCode.SMART_MAGNET_FAULT: (
+        "The smart magnet system reported a fault or unsafe condition."
+    ),
+    DAQErrorCode.JFJOCH_UNAVAILABLE: (
+        "JFJoch detector communication failed or the detector service is unavailable."
+    ),
+    DAQErrorCode.AEROTECH_UNAVAILABLE: (
+        "Aerotech communication failed or the motion controller is unavailable."
+    ),
+    DAQErrorCode.AAREDB_UNAVAILABLE: (
+        "AareDB communication failed or the database service is unavailable."
+    ),
+    DAQErrorCode.MAGNET_POSITION_SENSOR_ERROR: (
+        "The magnet position sensor reported an invalid or unsafe state."
+    ),
 }
 
 def error_code_help(code: str) -> str | None: