From c1b422e4e7e3e2cf5104e84ebdfb87c9d3c44d43 Mon Sep 17 00:00:00 2001 From: Anders Sandstrom Date: Fri, 11 Feb 2022 18:43:11 +0100 Subject: [PATCH] Update README --- README.md | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/README.md b/README.md index f94a275..582bdd4 100644 --- a/README.md +++ b/README.md @@ -151,7 +151,9 @@ $30=1000 Loading of grbl configuration can be done by issuing the following iocsh cmds: * ecmcGrblLoadConfigFile(*filename*) * ecmcGrblAddConfig(*command*) + These commands can only be used before iocInit(). + At iocInit() these configurationd will be written to grbl. ### ecmcGrblLoadConfigFile(filename) @@ -209,6 +211,7 @@ Loading of grbl g-code nc programs can be done by issuing the following iocsh cm ## ecmcGrblLoadGCodeFile(filename, append) The ecmcGrblLoadGCodeFile(*filename*, *append*) command loads a file containing nc code. + If *append* parameter is set then the code in the file will be appended to any previous added nc code in the program buffer, otherwise the nc code program buffer will be cleared before adding the contents of the file. @@ -263,6 +266,8 @@ Some pictures of x and y actual and setpoints for G0,G1,G2,G4 commands: * X = Axis1 * Y = Axis2 +NOTE: The tests are performed on simple belt drive linear axes. + ## X and Y positions ![X and Y positions](doc/ecmc/example.png)