Also compile for deb12

GNUmakefile

@@ -2,11 +2,13 @@ include /ioc/tools/driver.makefile
 
 MODULE = ecmc_plugin_daq
 
-BUILDCLASSES = Linux
+# "Transfer" module name to plugin
-ARCH_FILTER = deb10%
+USR_CFLAGS +=-DECMC_PLUGIN_MODULE_NAME=${MODULE}
 
-# Run 7.0.6 for now
+BUILDCLASSES = Linux
-EXCLUDE_VERSIONS+=3 7.0.5 7.0.6
+ARCH_FILTER = deb10% deb12%
+
+EXCLUDE_VERSIONS+=3 7.0.5 7.0.6 7.0.7 7.0.9
 
 IGNORE_MODULES += asynMotor
 IGNORE_MODULES += motorBase
@@ -16,7 +18,7 @@ OPT_CXXFLAGS_YES = -O3
 
 # dependencies
 ECmasterECMC_VERSION = v1.1.0
-ecmc_VERSION = 9
+ecmc_VERSION = 10.0
 
 BASE_DIR = .
 SRC_DIR = $(BASE_DIR)/src

src/ecmcPluginDAQ.c

@@ -32,11 +32,11 @@ static char*  lastConfStr         = NULL;
 static int alreadyLoaded = 0;
 
 /** Optional. 
- *  Will be called once after successfull load into ecmc.
+ *  Will be called once after successful load into ecmc.
  *  Return value other than 0 will be considered error.
  *  configStr can be used for configuration parameters.
  **/
-int daqConstruct(char *configStr)
+static int daqConstruct(char *configStr)
 {
   if(alreadyLoaded) {
     printf("Error: Plugin ecmc_plugin_daq already loaded and can only be loaded once.");
@@ -51,7 +51,7 @@ int daqConstruct(char *configStr)
 /** Optional function.
  *  Will be called once at unload.
  **/
-void daqDestruct(void)
+static void daqDestruct(void)
 {
   // Segfaults here during destruction?! need to check..
   //deleteAllDAQs();
@@ -61,19 +61,19 @@ void daqDestruct(void)
 }
 
 /** Optional function.
- *  Will be called each realtime cycle if definded
+ *  Will be called each realtime cycle if defined
- *  ecmcError: Error code of ecmc. Makes it posible for 
+ *  ecmcError: Error code of ecmc. Makes it possible for 
  *  this plugin to react on ecmc errors
  *  Return value other than 0 will be considered to be an error code in ecmc.
  **/
-int daqRealtime(int ecmcError)
+static int daqRealtime(int ecmcError)
 { 
   lastEcmcError = ecmcError;  
   return executeDAQs();
 }
 
 
-int daqEnterRT(){
+static int daqEnterRT(){
   return validateDAQs(); //linkDataToDAQs();
 }
 
@@ -81,31 +81,16 @@ int daqEnterRT(){
  *  Will be called once just before leaving realtime mode
  *  Return value other than 0 will be considered error.
  **/
-int daqExitRT(void){
+static int daqExitRT(void){
   return 0;
 }
 
-// // Plc function for clear of buffers
-// double daq_clear(double index) {
-//   return (double)clearDAQ((int)index);
-// }
-
-// Plc function for enable
-//double daq_enable(double index, double enable) {
-//  return 0; //(double)enableDAQ((int)index, (int)enable);
-//}
-
-// // Plc function for trigg new measurement (will clear buffers)
-// double daq_trigg(double index) {
-//   return (double)triggDAQ((int)index);
-// }
-
 // Register data for plugin so ecmc know what to use
-struct ecmcPluginData pluginDataDef = {
+static struct ecmcPluginData pluginDataDef = {
   // Allways use ECMC_PLUG_VERSION_MAGIC
   .ifVersion = ECMC_PLUG_VERSION_MAGIC, 
   // Name 
-  .name = "ecmcPlugin_DAQ",
+  .name = "ecmc_plugin_daq",
   // Description
   .desc = "DAQ plugin for use with ecmc.",
   // Option description
@@ -124,28 +109,6 @@ struct ecmcPluginData pluginDataDef = {
   .realtimeExitFnc = daqExitRT,
   // PLC funcs
   .funcs[0] = {0},
-//      { /*----fft_clear----*/
-//        // Function name (this is the name you use in ecmc plc-code)
-//        .funcName = "daq_enable",
-//        // Function description
-//        .funcDesc = "daq_enable(index,enable) : Enable/disaable daq[index].",
-//        /**
-//        * 12 different prototypes allowed (only doubles since reg in plc).
-//        * Only funcArg${argCount} func shall be assigned the rest set to NULL.
-//        **/
-//        .funcArg0 = NULL,
-//        .funcArg1 = NULL,
-//        .funcArg2 = daq_enable,
-//        .funcArg3 = NULL,
-//        .funcArg4 = NULL,
-//        .funcArg5 = NULL,
-//        .funcArg6 = NULL,
-//        .funcArg7 = NULL,
-//        .funcArg8 = NULL,
-//        .funcArg9 = NULL,
-//        .funcArg10 = NULL,
-//        .funcGenericObj = NULL,
-//      },
   .consts[0] = {0}, // last element set all to zero..
 };
 

startup.cmd

@@ -10,10 +10,15 @@
 #-###############################################################################
 #-
 #- Arguments
-#- PLUGIN_ID : Id of plugin to load (mandatory)
+#- PLUGIN_ID : Id of plugin to load (optional)
 #-
 #################################################################################
 
 #- Load plugin:
+
 epicsEnvSet(ECMC_PLUGIN_FILNAME,"$(ecmc_plugin_daq_DIR)lib/${EPICS_HOST_ARCH=linux-x86_64}/libecmc_plugin_daq.so")
-${SCRIPTEXEC} ${ecmccfg_DIR}loadPlugin.cmd, "PLUGIN_ID=${PLUGIN_ID}, FILE='${ECMC_PLUGIN_FILNAME}' , CONFIG='NOT USED',REPORT=1"
+ecmcIf("${PLUGIN_ID=-1}=-1")
+${IF_TRUE}${SCRIPTEXEC} ${ecmccfg_DIR}loadPlugin.cmd, "FILE='${ECMC_PLUGIN_FILNAME}' , CONFIG='NOT USED',REPORT=1"
+#else
+${IF_FALSE}${SCRIPTEXEC} ${ecmccfg_DIR}loadPlugin.cmd, "PLUGIN_ID=${PLUGIN_ID}, FILE='${ECMC_PLUGIN_FILNAME}' , CONFIG='NOT USED',REPORT=1"
+ecmcEndIf()