Start from scope plugin

iocsh/test_plugin_scope.script

@@ -0,0 +1,63 @@
+##############################################################################
+# Test to make a triggered scope
+
+##############################################################################
+## Initiation:
+epicsEnvSet("IOC" ,"$(IOC="IOC_TEST")")
+epicsEnvSet("ECMCCFG_INIT" ,"")  #Only run startup once (auto at PSI, need call at ESS), variable set to "#" in startup.cmd
+epicsEnvSet("SCRIPTEXEC" ,"$(SCRIPTEXEC="iocshLoad")")
+
+require ecmccfg develop
+
+# run module startup.cmd (only needed at ESS  PSI auto call at require)
+$(ECMCCFG_INIT)$(SCRIPTEXEC) ${ecmccfg_DIR}startup.cmd, "IOC=$(IOC),ECMC_VER=develop,stream_VER=2.8.10, EC_RATE=1000"
+
+##############################################################################
+## Config hardware:
+
+## Sampel rate in milliseconds
+epicsEnvSet("ECMC_SAMPLE_RATE_MS",            "${RATE="1"}")
+
+# Choose sample rate (2, 10 or 100)
+epicsEnvSet("ECMC_OVER_SMP",                  "${OVERSAMP="100"}")
+
+# EL1252: trigger on pos edge timestamp
+epicsEnvSet("SLAVE_NUM_TRIGG",           "6")
+${SCRIPTEXEC} ${ecmccfg_DIR}addSlave.cmd, "SLAVE_ID=$(SLAVE_NUM_TRIGG), HW_DESC=EL1252"
+
+# EL3702: Note: Set NELM to define oversampling rate
+epicsEnvSet("SLAVE_NUM_AI",              "11")
+${SCRIPTEXEC} ${ecmccfg_DIR}addSlave.cmd, "SLAVE_ID=$(SLAVE_NUM_AI), HW_DESC=EL3702, NELM=${ECMC_OVER_SMP}"
+
+#ecmcConfigOrDie "Cfg.EcSelectReferenceDC(0,$(SLAVE_NUM_TRIGG))"
+
+#Apply hardware configuration
+ecmcConfigOrDie "Cfg.EcApplyConfig(1)"
+
+########################################################################s######
+## Load plugin: Scope
+
+require ecmc_plugin_scope master  # to get access to db file..
+
+epicsEnvSet(RESULT_NELM, 500)
+epicsEnvSet(ECMC_PLUGIN_FILNAME,"${HOME}/epics/base-7.0.4/require/3.3.0/siteMods/ecmc_plugin_scope/master/lib/${EPICS_HOST_ARCH=linux-x86_64}/libecmcPlugin_Scope.so")
+epicsEnvSet(ECMC_PLUGIN_CONFIG,"SOURCE=ec0.s${SLAVE_NUM_AI}.mm.CH1_ARRAY;DBG_PRINT=0;TRIGG=ec0.s${SLAVE_NUM_TRIGG}.CH1_LATCH_POS;SOURCE_NEXTTIME=ec0.s${SLAVE_NUM_AI}.NEXT_TIME;RESULT_ELEMENTS=${RESULT_NELM};")
+${SCRIPTEXEC} ${ecmccfg_DIR}loadPlugin.cmd, "PLUGIN_ID=1,FILE=${ECMC_PLUGIN_FILNAME},CONFIG='${ECMC_PLUGIN_CONFIG}', REPORT=1"
+epicsEnvUnset(ECMC_PLUGIN_FILNAME)
+epicsEnvUnset(ECMC_PLUGIN_CONFIG)
+
+dbLoadRecords("ecmcPluginScope.template","P=$(IOC):,PORT=${ECMC_ASYN_PORT},INDEX=0,RESULT_NELM=${RESULT_NELM},RESULT_DTYP=asynInt16ArrayIn,RESULT_FTVL=SHORT")
+epicsEnvUnset(RESULT_NELM, 1024)
+
+##############################################################################
+############# Configure diagnostics:
+
+ecmcConfigOrDie "Cfg.EcSetDiagnostics(1)"
+ecmcConfigOrDie "Cfg.EcEnablePrintouts(0)"
+ecmcConfigOrDie "Cfg.EcSetDomainFailedCyclesLimit(100)"
+
+# go active
+$(SCRIPTEXEC) ($(ecmccfg_DIR)setAppMode.cmd)
+
+iocInit()
+dbl > pvs.log