# *****************************************************************************
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
# Module authors:
#   Davis V. Garrad <davis.last@psi.ch>
#   Tina Arh <tina.arh@psi.ch>
#
# *****************************************************************************

# Select the parameters that are written under environment in HDF file at every write
SetEnvironment(tt, mf, nmr_TSSOP16, nmr_RP100Node_CH1, nmr_RP100Node_CH2, r1, tps)#, ZVLNode)

# PPMS: Set field & temperature

#maw(tt, 3) # set PPMS temperature (in Kelvin)
#maw(mf, 3) # set the starting PPMS field (in Tesla)
#nicossleep(20*60) # 20 minutes
# ...

# Create the pulse sequence

pw90 = 2.5 # us
amp = 25 # percent
tau = 20 # us

# generate_pulse(pulse_width, amplitude, delay_time, pulse_cycle)
p180   = generate_pulse(2*pw90, amp, 1,   '0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0') # 180deg
p90    = generate_pulse(pw90,   amp, tau, '0 2 0 2 1 3 1 3 0 2 0 2 1 3 1 3') # 90deg
p180_2 = generate_pulse(2*pw90, amp, 0,   '1 3 3 1 2 0 0 2 0 2 2 0 3 1 1 3') # 180deg
seq = [ p180, p90, p180_2 ]

# Create the list of sequences to scan (specifically, for a T1 scan)
delay_times = log_durations(1, 600000, 20)
# generates a list of sequences; copies of seq are made, only the zeroth pulse is modified. Each copy is given a 'delay_time' value from delay_times
seq_list = generate_sequences(seq, [0], 'delay_time', delay_times)

# Set some parameters independent of pulse sequence
globalparams = {
    'acq_phase_cycle': '0 2 0 2 1 3 1 3 2 0 2 0 3 1 3 1',
    'acquisition_time': 204.8, # us
    'num_acqs': 16000, # "1D scans" in TNMR. Our 16-fold phase cycling means this should be a multiple of 16 for proper averaging
    'ringdown_time': 11, # us
    'post_acquisition_time': 200, # ms
    'obs_freq': 42.09, # MHz. Receiver frequency
    'nucleus': 'NUCMgReS', # For example, 139La. Will be used in a filename!
    'comments': 'An example of a T1 scan',
    'title': 'T1', # Goes at the beginning of a filename!
}
update_device_parameters(nmr_daq_scout, globalparams)

# Acquire data
scan_sequences(nmr_daq_scout, seq_list) # gather the data