void slsdspCodeToText(int code, char *text, int textlen)
{
  switch (code) {
  case 0x0:
    strncpy(text, "NO", textlen);
    break;
  case 0x1:
    strncpy(text, "DEVICE_STATE_ERROR", textlen);
    break;
  case 0x2:
    strncpy(text, "DEVICE_SUPERVISOR_DISABLED", textlen);
    break;
  case 0x3:
    strncpy(text, "COMMAND_ABORT", textlen);
    break;
  case 0x4:
    strncpy(text, "DATA_NOT_STORED", textlen);
    break;
  case 0x5:
    strncpy(text, "ERROR_ERASING_FLASH", textlen);
    break;
  case 0x6:
    strncpy(text, "COMMUNICATION_BREAK", textlen);
    break;
  case 0x7:
    strncpy(text, "INTERNAL_COMMUNICATION_ERROR", textlen);
    break;
  case 0x8:
    strncpy(text, "MASTER_CARD_ERROR", textlen);
    break;
  case 0x9:
    strncpy(text, "INTERNAL_BUFFER_FULL", textlen);
    break;
  case 0xa:
    strncpy(text, "WRONG_SECTOR", textlen);
    break;
  case 0xb:
    strncpy(text, "DATA_NOT_COPIED", textlen);
    break;
  case 0xc:
    strncpy(text, "WRONG_DOWNLOAD_PARAMETERS", textlen);
    break;
  case 0xd:
    strncpy(text, "DEVICE_PARAMETRIZATION_ERROR", textlen);
    break;
  case 0x10:
    strncpy(text, "TIMEOUT_DC_LINK_VOLTAGE", textlen);
    break;
  case 0x11:
    strncpy(text, "TIMEOUT_AUXILIARY_RELAY_ON", textlen);
    break;
  case 0x12:
    strncpy(text, "TIMEOUT_AUXILIARY_RELAY_OFF", textlen);
    break;
  case 0x13:
    strncpy(text, "TIMEOUT_MAIN_RELAY_ON", textlen);
    break;
  case 0x14:
    strncpy(text, "TIMEOUT_MAIN_RELAY_OFF", textlen);
    break;
  case 0x15:
    strncpy(text, "TIMEOUT_DATA_DOWNLOAD", textlen);
    break;
  case 0x20:
    strncpy(text, "INTERLOCK", textlen);
    break;
  case 0x21:
    strncpy(text, "MASTER_SWITCH", textlen);
    break;
  case 0x22:
    strncpy(text, "MAGNET_INTERLOCK", textlen);
    break;
  case 0x23:
    strncpy(text, "TEMPERATURE_TRANSFORMER", textlen);
    break;
  case 0x24:
    strncpy(text, "TEMPERATURE_RECTIFIER", textlen);
    break;
  case 0x25:
    strncpy(text, "TEMPERATURE_CONVERTER", textlen);
    break;
  case 0x26:
    strncpy(text, "CURRENT_TRANSDUCER", textlen);
    break;
  case 0x27:
    strncpy(text, "TEMPERATURE_POLARITY_SWITCH", textlen);
    break;
  case 0x28:
    strncpy(text, "POWER_SEMICONDUCTOR", textlen);
    break;
  case 0x29:
    strncpy(text, "MAIN_RELAY", textlen);
    break;
  case 0x2a:
    strncpy(text, "AD_CONVERTER_CARD", textlen);
    break;
  case 0x2b:
    strncpy(text, "POLARITY_SWITCH", textlen);
    break;
  case 0x2c:
    strncpy(text, "AUXILIARY_RELAY", textlen);
    break;
  case 0x2d:
    strncpy(text, "MASTER_SWITCH_T1", textlen);
    break;
  case 0x2e:
    strncpy(text, "MASTER_SWITCH_T2", textlen);
    break;
  case 0x2f:
    strncpy(text, "TEMPERATURE_MAGNET", textlen);
    break;
  case 0x30:
    strncpy(text, "WATER_MAGNET", textlen);
    break;
  case 0x31:
    strncpy(text, "WATER_RACK", textlen);
    break;
  case 0x40:
    strncpy(text, "LOAD_CURRENT_TOO_HIGH", textlen);
    break;
  case 0x41:
    strncpy(text, "DC_LINK_VOLTAGE_TOO_LOW", textlen);
    break;
  case 0x42:
    strncpy(text, "DC_LINK_VOLTAGE_TOO_HIGH", textlen);
    break;
  case 0x43:
    strncpy(text, "LOAD_VOLTAGE_TOO_HIGH", textlen);
    break;
  case 0x44:
    strncpy(text, "LOAD_CURRENT_RIPPLE_TOO_HIGH", textlen);
    break;
  case 0x45:
    strncpy(text, "DC_LINK_ISOLATION_NOT_OK", textlen);
    break;
  case 0x46:
    strncpy(text, "LOAD_ISOLATION_NOT_OK", textlen);
    break;
  case 0x47:
    strncpy(text, "LOAD_IMPEDANCE_OUT_OF_RANGE", textlen);
    break;
  case 0x48:
    strncpy(text, "SHUT_OFF_CURRENT_TOO_HIGH", textlen);
    break;
  case 0x49:
    strncpy(text, "LOAD_DC_CURRENT_TOO_HIGH", textlen);
    break;
  case 0x4a:
    strncpy(text, "CURRENT_I1A1_TOO_HIGH", textlen);
    break;
  case 0x4b:
    strncpy(text, "CURRENT_I1B1_TOO_HIGH", textlen);
    break;
  case 0x4c:
    strncpy(text, "CURRENT_I1A2_TOO_HIGH", textlen);
    break;
  case 0x4d:
    strncpy(text, "CURRENT_I1B2_TOO_HIGH", textlen);
    break;
  case 0x4e:
    strncpy(text, "CURRENT_I2A1_TOO_HIGH", textlen);
    break;
  case 0x4f:
    strncpy(text, "CURRENT_I2B1_TOO_HIGH", textlen);
    break;
  case 0x50:
    strncpy(text, "CURRENT_I2A2_TOO_HIGH", textlen);
    break;
  case 0x51:
    strncpy(text, "CURRENT_I2B2_TOO_HIGH", textlen);
    break;
  case 0x52:
    strncpy(text, "CURRENT_I3P_TOO_HIGH", textlen);
    break;
  case 0x53:
    strncpy(text, "CURRENT_I3N_TOO_HIGH", textlen);
    break;
  case 0x54:
    strncpy(text, "CURRENT_IE_TOO_HIGH", textlen);
    break;
  case 0x55:
    strncpy(text, "VOLTAGE_U1A_TOO_LOW", textlen);
    break;
  case 0x56:
    strncpy(text, "VOLTAGE_U1B_TOO_LOW", textlen);
    break;
  case 0x57:
    strncpy(text, "DIFF_CURRENT_I1A1_I1A2_TOO_HIGH", textlen);
    break;
  case 0x58:
    strncpy(text, "DIFF_CURRENT_I1B1_I1B2_TOO_HIGH", textlen);
    break;
  case 0x59:
    strncpy(text, "DIFF_CURRENT_I2A1_I2A2_TOO_HIGH", textlen);
    break;
  case 0x5a:
    strncpy(text, "DIFF_CURRENT_I2B1_I2B2_TOO_HIGH", textlen);
    break;
  case 0x5b:
    strncpy(text, "DIFF_CURRENT_I3P_I3N_TOO_HIGH", textlen);
    break;
  case 0x5c:
    strncpy(text, "CURRENT_I1A_TOO_HIGH", textlen);
    break;
  case 0x5d:
    strncpy(text, "CURRENT_I1B_TOO_HIGH", textlen);
    break;
  case 0x5e:
    strncpy(text, "CURRENT_I3A1_TOO_HIGH", textlen);
    break;
  case 0x5f:
    strncpy(text, "CURRENT_I3B1_TOO_HIGH", textlen);
    break;
  case 0x60:
    strncpy(text, "CURRENT_I3A2_TOO_HIGH", textlen);
    break;
  case 0x61:
    strncpy(text, "CURRENT_I3B2_TOO_HIGH", textlen);
    break;
  case 0x62:
    strncpy(text, "CURRENT_I4_TOO_HIGH", textlen);
    break;
  case 0x63:
    strncpy(text, "CURRENT_I5_TOO_HIGH", textlen);
    break;
  case 0x64:
    strncpy(text, "DIFF_CURRENT_I3A1_I3A2_TOO_HIGH", textlen);
    break;
  case 0x65:
    strncpy(text, "DIFF_CURRENT_I3B1_I3B2_TOO_HIGH", textlen);
    break;
  case 0x66:
    strncpy(text, "DIFF_CURRENT_I4_I5_TOO_HIGH", textlen);
    break;
  case 0x67:
    strncpy(text, "VOLTAGE_U3A_TOO_LOW", textlen);
    break;
  case 0x68:
    strncpy(text, "VOLTAGE_U3B_TOO_LOW", textlen);
    break;
  case 0x69:
    strncpy(text, "VOLTAGE_U1_TOO_LOW", textlen);
    break;
  case 0x6a:
    strncpy(text, "VOLTAGE_U3A_TOO_HIGH", textlen);
    break;
  case 0x6b:
    strncpy(text, "VOLTAGE_U3B_TOO_HIGH", textlen);
    break;
  case 0x6c:
    strncpy(text, "SPEED_ERROR_TOO_HIGH", textlen);
    break;
  case 0x70:
    strncpy(text, "MAIN_RELAY_A", textlen);
    break;
  case 0x71:
    strncpy(text, "MAIN_RELAY_B", textlen);
    break;
  case 0x72:
    strncpy(text, "POWER_SWITCH_A", textlen);
    break;
  case 0x73:
    strncpy(text, "POWER_SWITCH_B", textlen);
    break;
  case 0x74:
    strncpy(text, "MONITOR_TRAFO_A", textlen);
    break;
  case 0x75:
    strncpy(text, "MONITOR_TRAFO_B", textlen);
    break;
  case 0x76:
    strncpy(text, "TEMPERATURE_RECTIFIER_A", textlen);
    break;
  case 0x77:
    strncpy(text, "TEMPERATURE_RECTIFIER_B", textlen);
    break;
  case 0x78:
    strncpy(text, "TEMPERATURE_CONVERTER_A", textlen);
    break;
  case 0x79:
    strncpy(text, "TEMPERATURE_CONVERTER_B", textlen);
    break;
  case 0x7a:
    strncpy(text, "TEMPERATURE_CONVERTER_A1", textlen);
    break;
  case 0x7b:
    strncpy(text, "TEMPERATURE_CONVERTER_B1", textlen);
    break;
  case 0x7c:
    strncpy(text, "TEMPERATURE_CONVERTER_A2", textlen);
    break;
  case 0x7d:
    strncpy(text, "TEMPERATURE_CONVERTER_B2", textlen);
    break;
  case 0x7e:
    strncpy(text, "TEMPERATURE_TRANSFORMER_A", textlen);
    break;
  case 0x7f:
    strncpy(text, "TEMPERATURE_TRANSFORMER_B", textlen);
    break;
  case 0x80:
    strncpy(text, "WATER_RECTIFIER_A", textlen);
    break;
  case 0x81:
    strncpy(text, "WATER_RECTIFIER_B", textlen);
    break;
  case 0x82:
    strncpy(text, "WATER_CONVERTER_A", textlen);
    break;
  case 0x83:
    strncpy(text, "WATER_CONVERTER_B", textlen);
    break;
  case 0x84:
    strncpy(text, "WATER_CONVERTER_A1", textlen);
    break;
  case 0x85:
    strncpy(text, "WATER_CONVERTER_B1", textlen);
    break;
  case 0x86:
    strncpy(text, "WATER_CONVERTER_A2", textlen);
    break;
  case 0x87:
    strncpy(text, "WATER_CONVERTER_B2", textlen);
    break;
  case 0x88:
    strncpy(text, "WATER_TRANSFORMER_A", textlen);
    break;
  case 0x89:
    strncpy(text, "WATER_TRANSFORMER_B", textlen);
    break;
  case 0x8a:
    strncpy(text, "DOOR_A", textlen);
    break;
  case 0x8b:
    strncpy(text, "DOOR_B", textlen);
    break;
  case 0x8c:
    strncpy(text, "DOOR_C", textlen);
    break;
  case 0x8d:
    strncpy(text, "POWER_SEMICONDUCTOR_CONVERTER_A", textlen);
    break;
  case 0x8e:
    strncpy(text, "POWER_SEMICONDUCTOR_CONVERTER_B", textlen);
    break;
  case 0x8f:
    strncpy(text, "POWER_SEMICONDUCTOR_CONVERTER_A1", textlen);
    break;
  case 0x90:
    strncpy(text, "POWER_SEMICONDUCTOR_CONVERTER_B1", textlen);
    break;
  case 0x91:
    strncpy(text, "POWER_SEMICONDUCTOR_CONVERTER_A2", textlen);
    break;
  case 0x92:
    strncpy(text, "POWER_SEMICONDUCTOR_CONVERTER_B2", textlen);
    break;
  case 0x93:
    strncpy(text, "CURRENT_TRANSDUCER_I3P", textlen);
    break;
  case 0x94:
    strncpy(text, "CURRENT_TRANSDUCER_I3N", textlen);
    break;
  case 0x95:
    strncpy(text, "MAGNET_INTERLOCK_1", textlen);
    break;
  case 0x96:
    strncpy(text, "MAGNET_INTERLOCK_2", textlen);
    break;
  case 0x97:
    strncpy(text, "VENTILATOR", textlen);
    break;
  case 0x98:
    strncpy(text, "EMERGENCY_SWITCH", textlen);
    break;
  case 0x99:
    strncpy(text, "CAPACITOR_DISCHARGE_A_ON", textlen);
    break;
  case 0x9a:
    strncpy(text, "CAPACITOR_DISCHARGE_B_ON", textlen);
    break;
  case 0x9b:
    strncpy(text, "CURRENT_TRANSDUCER_I4", textlen);
    break;
  case 0x9c:
    strncpy(text, "CURRENT_TRANSDUCER_I5", textlen);
    break;
  case 0xb0:
    strncpy(text, "TIMEOUT_DC_LINK_VOLTAGE_PART_A", textlen);
    break;
  case 0xb1:
    strncpy(text, "TIMEOUT_DC_LINK_VOLTAGE_PART_B", textlen);
    break;
  case 0xb2:
    strncpy(text, "TIMEOUT_AUXILIARY_RELAY_A_ON", textlen);
    break;
  case 0xb3:
    strncpy(text, "TIMEOUT_AUXILIARY_RELAY_B_ON", textlen);
    break;
  case 0xb4:
    strncpy(text, "TIMEOUT_AUXILIARY_RELAY_A_OFF", textlen);
    break;
  case 0xb5:
    strncpy(text, "TIMEOUT_AUXILIARY_RELAY_B_OFF", textlen);
    break;
  case 0xb6:
    strncpy(text, "TIMEOUT_MAIN_RELAY_A_ON", textlen);
    break;
  case 0xb7:
    strncpy(text, "TIMEOUT_MAIN_RELAY_B_ON", textlen);
    break;
  case 0xb8:
    strncpy(text, "TIMEOUT_MAIN_RELAY_A_OFF", textlen);
    break;
  case 0xb9:
    strncpy(text, "TIMEOUT_MAIN_RELAY_B_OFF", textlen);
    break;
  }
}