ef7c2a6f87
sicvar.c SICS-93 Save histogram data and instrument state during an acquisition hipadaba_configuration_common.tcl SICS-185 Preserve case on hdb node names hmm_configuration_common_1.tcl nxscripts_common_1.tcl sicvar.c SICS-174 Allow saving of histmem data and instrument status during a count operation. wombat_configuration.tcl echidna_configuration.tcl platypus_configuration.tcl kowari_configuration.tcl quokka_configuration.tcl SICS-153 Move setup of statemon to new server_init function for the new sics_uid state variable server_config.tcl SICS-153 set attributes on the sics_suid var which is now created by MakeStateMon SICS-187 Add cold source info (TODO move to platypus,quokka and pelican configs) utility.tcl SICS-185 Added normalgetatt to preserve case on hdb node names etc. sans/config/optics/aperture_configuration.tcl New file, Provides lookup tables for attenuation and entrance apertures. (SICS-157) sans/config/optics/optics.tcl Load the new aperture_configuration.tcl sans/config/parameters/parameters.tcl SICS-157 Add instrument parameters section with derived parameters and their dependencies statemon.c SICS-153 Create sics_suid sicsvariable when loading statemon and increment it on each status change. r2635 | ffr | 2008-06-23 12:41:12 +1000 (Mon, 23 Jun 2008) | 38 lines
54 lines
1.4 KiB
Tcl
54 lines
1.4 KiB
Tcl
# $Revision: 1.21 $
|
|
# $Date: 2008-06-23 02:41:12 $
|
|
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
|
|
# Last revision by: $Author: ffr $
|
|
|
|
# Required by server_config.tcl
|
|
VarMake Instrument Text Internal
|
|
Instrument wombat
|
|
Instrument lock
|
|
|
|
#START SERVER CONFIGURATION SECTION
|
|
source util/dmc2280/dmc2280_util.tcl
|
|
source sics_ports.tcl
|
|
source server_config.tcl
|
|
#END SERVER CONFIGURATION SECTION
|
|
|
|
########################################
|
|
# INSTRUMENT SPECIFIC CONFIGURATION
|
|
|
|
fileeval $cfPath(motors)/motor_configuration.tcl
|
|
|
|
source instrument_vars.tcl
|
|
|
|
source $cfPath(hipadaba)/hipadaba_configuration.tcl
|
|
fileeval $cfPath(plc)/plc.tcl
|
|
fileeval $cfPath(counter)/counter.tcl
|
|
#TODO Provide method for choosing environment controller
|
|
fileeval $cfPath(environment)/temperature/lakeshore340.tcl
|
|
fileeval $cfPath(hmm)/hmm_configuration.tcl
|
|
fileeval $cfPath(nexus)/nxscripts.tcl
|
|
fileeval $cfPath(scan)/scan.tcl
|
|
fileeval $cfPath(commands)/commands.tcl
|
|
source gumxml.tcl
|
|
|
|
########
|
|
# Parameters set above the restore command will be clobbered by
|
|
# the values in the status.tcl file
|
|
# BIG WARNING: DON'T PUT 'restore' IN A CATCH BLOCK BECAUSE IT RETURNS
|
|
# AN ERROR IF THERE IS NO ../log/status.tcl FILE.
|
|
restore
|
|
|
|
::histogram_memory::initialize
|
|
#::environment::temperature::add_ls340
|
|
|
|
|
|
if [file exists extraconfig.tcl] {
|
|
fileeval extraconfig.tcl
|
|
} else {
|
|
clientput "extraconfig.tcl not found. continueing"
|
|
}
|
|
|
|
server_init
|
|
buildHDB instrument_dictionary
|