sics/site_ansto/instrument/config at e666d980fddbde77d2dd9efa7957c7c1b7edd811 - sics

linse/sics

Files

Ferdi Franceschini 5914db28c3 Save the magnetic field value setpoint last set by SICS for the Oxford 12T magnet.

TODO:We should save the setpoint from the Labview program.

2013-10-18 18:11:35 +11:00

anticollider

SICS-606 Allow defining multiple motors and ranges to forbid moves.

2013-05-17 03:22:49 +10:00

commands

SICS-646: Restore histogram command to hdb tree.

2013-08-09 05:30:54 +10:00

counter

Set scan=1ms and scans per sample=10 on the counters when SICS starts up.

2013-04-10 17:03:30 +10:00

environment

Save the magnetic field value setpoint last set by SICS for the Oxford 12T magnet.

2013-10-18 18:11:35 +11:00

hipadaba

Copied in-situ modifications from ics1-quokka.

2013-02-20 18:19:44 +11:00

hmm

Create frame frequency parameter on simulated hmm.

2013-09-23 23:40:12 +10:00

motors

Make sure that a posit motor transitions back to IDLE if the motor it depends on has been first driven directly.

2013-09-10 14:23:14 +10:00

nexus

Force updates of sicsvariables if the save command is called when counting in blocking mode.

2013-09-23 23:43:05 +10:00

plc

sct_protek608.c

2012-11-15 17:00:29 +11:00

robots

revert "driving" and update ROTATE

2012-11-15 17:10:31 +11:00

scan

Make sure that scans only save scratch files if called with 'savetype nosave'

2013-10-15 02:56:43 +11:00

source

Report zero for reactor power and temperatures when using dummy reactor info.

2012-11-15 17:02:39 +11:00

load_setup.tcl

Load environment configuration file taipan_setup.txt if it exists.

2013-05-06 21:23:41 +10:00

README.TXT

pelican

2012-11-15 13:40:07 +11:00

README.TXT

This directory contains common configuration files shared by the instrument specific configurations.
How to add a new configuration section

  mkdir config/newcomp
Create the common config file, eg
  config/newcomp/newcomp_common.tcl

Create the instrument specific config file which sources the common config
  hrpd/config/newcomp/newcomp.tcl

Add the path for the common config file to the common config list
  hrpd/config/INSTCFCOMMON.TXT

DON'T FORGET TO ADD THE NEW FILES AND DIRECTORIES TO CVS