01be487c52
Create pas/config/source/source.tcl config/source/source_common.tcl pelican_configuration.tcl deploySICS.sh Don't deploy script validator configs, they are obsolete server_config.tcl Source config has been moved to config/source and is specialised for each instrument by calling the instrument specific initialiser ::source:isc_initalize commands_common_1.tcl The monitor mode and preset are recorded when running the count command counter_common_1.tcl Report and record the counts and time for the multicounter and each monitor. Also record the mode and preset for the multicounter. hmm_configuration_common_1.tcl Cleanup, remove obsolete code. Report and record the hmm total counts and time. Allow monitor controlled acquisition from the histogram server nxscripts_common_1.tcl Add DataType to NXdata section, preserve case in text attributes. scan_common_1.tcl Provide sensible feedback for our bmonscan and hmscan objects. Set run_mode when doing a scan. Allow users to select the datatype for histmem scans and to force a scan wombat_configuration.tcl echidna_configuration.tcl platypus_configuration.tcl kowari_configuration.tcl quokka_configuration.tcl Load source config. quokka_configuration.tcl SICS-198 HACK, Add AttrotDeg and RotApDeg status feedback. sans/commands/commands.tcl Add status feedback for quokka "guide" command. sans/parameters/parameters.tcl Make sure data can be saved as xml (replace % with _percent) SICS-198 HACK, add AttRotDeg and RotApDeg status feedback. utility.tcl Fix nasty "params array generator" bug. SICS commands execute at runlevel 0 which means that the params anonymous array must be made at this level. Provide the normalattlist command to enable creating attribute lists with the case preserved. Added the runsics, runtestsics and sicsclient scripts to CVS. Added source configurations for echidna, wombat, kowari, quokka, platypus, and pelican to CVS r2644 | ffr | 2008-07-11 11:09:57 +1000 (Fri, 11 Jul 2008) | 53 lines
54 lines
1.4 KiB
Tcl
54 lines
1.4 KiB
Tcl
# $Revision: 1.1 $
|
|
# $Date: 2008-07-11 01:09:57 $
|
|
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
|
|
# Last revision by: $Author: ffr $
|
|
|
|
# Required by server_config.tcl
|
|
VarMake Instrument Text Internal
|
|
Instrument pelican
|
|
Instrument lock
|
|
|
|
#START SERVER CONFIGURATION SECTION
|
|
source util/dmc2280/dmc2280_util.tcl
|
|
source sics_ports.tcl
|
|
source server_config.tcl
|
|
#END SERVER CONFIGURATION SECTION
|
|
|
|
########################################
|
|
# INSTRUMENT SPECIFIC CONFIGURATION
|
|
|
|
fileeval $cfPath(source)/source.tcl
|
|
source $cfPath(hipadaba)/hipadaba_configuration.tcl
|
|
fileeval $cfPath(parameters)/parameters.tcl
|
|
fileeval $cfPath(motors)/motor_configuration.tcl
|
|
fileeval $cfPath(plc)/plc.tcl
|
|
fileeval $cfPath(counter)/counter.tcl
|
|
fileeval $cfPath(hmm)/hmm_configuration.tcl
|
|
fileeval $cfPath(hmm)/detector.tcl
|
|
fileeval $cfPath(nexus)/nxscripts.tcl
|
|
fileeval $cfPath(scan)/scan.tcl
|
|
fileeval $cfPath(commands)/commands.tcl
|
|
fileeval $cfPath(anticollider)/anticollider.tcl
|
|
source gumxml.tcl
|
|
|
|
|
|
########
|
|
# Parameters set above the restore command will be clobbered by
|
|
# the values in the status.tcl file
|
|
# BIG WARNING: DON'T PUT 'restore' IN A CATCH BLOCK BECAUSE IT RETURNS
|
|
# AN ERROR IF THERE IS NO ../log/status.tcl FILE.
|
|
restore
|
|
|
|
catch {
|
|
server_init
|
|
if [file exists extraconfig.tcl] {
|
|
fileeval extraconfig.tcl
|
|
}
|
|
|
|
buildHDB instrument_dictionary
|
|
}
|
|
|
|
clientput $errorContext
|
|
clientput $callStack
|
|
|