63 lines
2.5 KiB
Tcl
63 lines
2.5 KiB
Tcl
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
|
|
|
|
# Required by server_config.tcl
|
|
VarMake Instrument Text Internal
|
|
Instrument kowari
|
|
Instrument lock
|
|
|
|
#START SERVER CONFIGURATION SECTION
|
|
source util/dmc2280/dmc2280_util.tcl
|
|
source sics_ports.tcl
|
|
source server_config.tcl
|
|
MakeDrive
|
|
#END SERVER CONFIGURATION SECTION
|
|
|
|
########################################
|
|
# INSTRUMENT SPECIFIC CONFIGURATION
|
|
|
|
fileeval $cfPath(motors)/motor_configuration.tcl
|
|
|
|
|
|
fileeval $cfPath(source)/source.tcl
|
|
source $cfPath(hipadaba)/hipadaba_configuration.tcl
|
|
fileeval $cfPath(motors)/positmotor_configuration.tcl
|
|
fileeval $cfPath(plc)/plc.tcl
|
|
fileeval $cfPath(counter)/counter.tcl
|
|
fileeval $cfPath(environment)/sct_agilent_33220A.tcl
|
|
fileeval $cfPath(environment)/sct_isotech_ps.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_eurotherm_2000.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_eurotherm_m2000.tcl
|
|
fileeval $cfPath(environment)/sct_keithley_2700.tcl
|
|
fileeval $cfPath(environment)/sct_keithley_m2700.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_218.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_336.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_ls336.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_340.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_ls340.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_370.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_m370.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_base.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_level.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_pres.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_scpi.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_temp.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_valve.tcl
|
|
fileeval $cfPath(environment)/sct_protek_common.tcl
|
|
fileeval $cfPath(environment)/sct_protekmm.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_oxford_labview.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_oxford12tlv.tcl
|
|
fileeval $cfPath(hmm)/hmm_configuration.tcl
|
|
fileeval $cfPath(nexus)/nxscripts.tcl
|
|
fileeval $cfPath(scan)/scan.tcl
|
|
fileeval $cfPath(commands)/commands.tcl
|
|
fileeval $cfPath(commands)/pulser.tcl
|
|
fileeval $cfPath(commands)/hvcommands.tcl
|
|
fileeval $cfPath(anticollider)/anticollider.tcl
|
|
source gumxml.tcl
|
|
|
|
server_init
|
|
###########################################
|
|
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.
|
|
|
|
# You can add extra-configuration code in ../extraconfig.tcl
|