sics/site_ansto/instrument/config at 68a746d46a6ed00f94a5878715636064ceb65e7d - sics

linse/sics

Files

Ferdi Franceschini 68a746d46a SICS-710: Make the watlow_rm driveable block until a drive has finished.

Also clear the geterror property to make sure that the driver recovers from Modbus error messages.

2014-01-15 16:31:13 +11:00

anticollider

SICS-606 Allow defining multiple motors and ranges to forbid moves.

2013-05-17 03:22:49 +10:00

commands

SICS-646: Restore histogram command to hdb tree.

2013-08-09 05:30:54 +10:00

counter

SICS-709: Refresh the count status whenever the current counts are fetched (eg before saving data).

2014-01-15 16:31:13 +11:00

environment

SICS-710: Make the watlow_rm driveable block until a drive has finished.

2014-01-15 16:31:13 +11:00

hipadaba

SICS-699 Provide a hipadaba "control" group for special hdb nodes like environment setpoints and sensor readings

2013-12-20 09:08:48 +11:00

hmm

SICS-700 Enable region of interest configuration parameters for histogram memory

2013-12-20 09:08:53 +11:00

motors

Make sure that a posit motor transitions back to IDLE if the motor it depends on has been first driven directly.

2013-09-10 14:23:14 +10:00

nexus

SICS-695 Save a named link for scan variables and other objects if required.

2013-12-20 09:08:47 +11:00

plc

sct_protek608.c

2012-11-15 17:00:29 +11:00

robots

revert "driving" and update ROTATE

2012-11-15 17:10:31 +11:00

scan

Fix typo to stop the scan command from checking thread0 on tclmot motors.

2013-12-20 09:09:02 +11:00

source

Report zero for reactor power and temperatures when using dummy reactor info.

2012-11-15 17:02:39 +11:00

load_setup.tcl

Load environment configuration file taipan_setup.txt if it exists.

2013-05-06 21:23:41 +10:00

README.TXT

pelican

2012-11-15 13:40:07 +11:00

README.TXT

This directory contains common configuration files shared by the instrument specific configurations.
How to add a new configuration section

  mkdir config/newcomp
Create the common config file, eg
  config/newcomp/newcomp_common.tcl

Create the instrument specific config file which sources the common config
  hrpd/config/newcomp/newcomp.tcl

Add the path for the common config file to the common config list
  hrpd/config/INSTCFCOMMON.TXT

DON'T FORGET TO ADD THE NEW FILES AND DIRECTORIES TO CVS