67 lines
2.4 KiB
Tcl
67 lines
2.4 KiB
Tcl
|
|
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
|
|
|
|
# Required by server_config.tcl
|
|
VarMake Instrument Text Internal
|
|
Instrument echidna
|
|
Instrument lock
|
|
|
|
#START SERVER CONFIGURATION SECTION
|
|
source util/dmc2280/dmc2280_util.tcl
|
|
source sics_ports.tcl
|
|
source server_config.tcl
|
|
MakeDrive
|
|
#END SERVER CONFIGURATION SECTION
|
|
|
|
########################################
|
|
# INSTRUMENT SPECIFIC CONFIGURATION
|
|
|
|
fileeval $cfPath(motors)/motor_configuration.tcl
|
|
|
|
source instrument_vars.tcl
|
|
|
|
fileeval $cfPath(source)/source.tcl
|
|
source $cfPath(hipadaba)/hipadaba_configuration.tcl
|
|
fileeval $cfPath(motors)/positmotor_configuration.tcl
|
|
fileeval $cfPath(plc)/plc.tcl
|
|
fileeval $cfPath(counter)/counter.tcl
|
|
#TODO Provide method for choosing environment controller
|
|
fileeval $cfPath(environment)/temperature/sct_eurotherm_2000.tcl
|
|
fileeval $cfPath(environment)/sct_keithley_2700.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_green_magnet.tcl
|
|
fileeval $cfPath(environment)/sct_keithley_2700.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_336.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_340.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_oxford_mercury.tcl
|
|
fileeval $cfPath(environment)/temperature/west400.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_watlow_pm.tcl
|
|
fileeval $cfPath(hmm)/hmm_configuration.tcl
|
|
fileeval $cfPath(nexus)/nxscripts.tcl
|
|
fileeval $cfPath(scan)/scan.tcl
|
|
fileeval $cfPath(commands)/pulser.tcl
|
|
fileeval $cfPath(commands)/hvcommands.tcl
|
|
fileeval $cfPath(commands)/commands.tcl
|
|
fileeval $cfPath(anticollider)/anticollider.tcl
|
|
#fileeval $cfPath(environment)/robby_configuration.tcl
|
|
fileeval $cfPath(robots)/sct_pickandplace.tcl
|
|
source gumxml.tcl
|
|
|
|
|
|
##########################################################
|
|
# Current driver for Lakeshore temperature controllers #
|
|
##########################################################
|
|
# driverName shortName IP-address port LineTerminator Tolerance1 Tolerance2 optional_Verbose
|
|
add_sct_ls340 tc2 ca5-[instname] 4002 "\r" 0.5 1.0
|
|
# add_sct_ls336 tc3 137.157.201.24 7777 "\r\n" 5.0 5.0
|
|
add_sct_ls336 tc1 137.157.201.23 7777 "\r\n" 5.0 5.0
|
|
|
|
#::environment::temperature::add_west400 137.157.201.14
|
|
#::robot::add_robby
|
|
add_robot robby 137.157.201.26 6000
|
|
#add_robot rosie 137.157.201.26 6000
|
|
server_init
|
|
###########################################
|
|
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.
|
|
|
|
# You can add extra-configuration code in ../extraconfig.tcl
|