91 lines
3.7 KiB
Tcl
91 lines
3.7 KiB
Tcl
|
|
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
|
|
|
|
# Required by server_config.tcl
|
|
VarMake Instrument Text Internal
|
|
Instrument echidna
|
|
Instrument lock
|
|
|
|
#START SERVER CONFIGURATION SECTION
|
|
source util/dmc2280/dmc2280_util.tcl
|
|
source sics_ports.tcl
|
|
source server_config.tcl
|
|
MakeDrive
|
|
#END SERVER CONFIGURATION SECTION
|
|
|
|
########################################
|
|
# INSTRUMENT SPECIFIC CONFIGURATION
|
|
|
|
fileeval $cfPath(motors)/motor_configuration.tcl
|
|
|
|
source instrument_vars.tcl
|
|
|
|
fileeval $cfPath(source)/source.tcl
|
|
source $cfPath(hipadaba)/hipadaba_configuration.tcl
|
|
fileeval $cfPath(motors)/positmotor_configuration.tcl
|
|
fileeval $cfPath(plc)/plc.tcl
|
|
fileeval $cfPath(counter)/counter.tcl
|
|
fileeval $cfPath(environment)/sct_agilent_33220A.tcl
|
|
fileeval $cfPath(environment)/sct_hiden_xcs.tcl
|
|
fileeval $cfPath(environment)/sct_huber_pilot.tcl
|
|
fileeval $cfPath(environment)/sct_isotech_ps.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_eurotherm_2000.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_eurotherm_m2000.tcl
|
|
fileeval $cfPath(environment)/sct_keithley_2700.tcl
|
|
fileeval $cfPath(environment)/sct_keithley_m2700.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_218.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_336.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_ls336.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_340.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_ls340.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_370.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_lakeshore_m370.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_oxford_mercury.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_mercury_valve.tcl
|
|
fileeval $cfPath(environment)/sct_protek_common.tcl
|
|
fileeval $cfPath(environment)/sct_protekmm.tcl
|
|
fileeval $cfPath(environment)/temperature/west400.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_west4100.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_west_6100.tcl
|
|
fileeval $cfPath(environment)/temperature/sct_watlow_pm.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_oxford_labview.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_oxford12tlv.tcl
|
|
fileeval $cfPath(environment)/he3/sct_he3.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_green_magnet.tcl
|
|
fileeval $cfPath(environment)/magneticField/sct_green_magnet_labview.tcl
|
|
fileeval $cfPath(hmm)/hmm_configuration.tcl
|
|
fileeval $cfPath(nexus)/nxscripts.tcl
|
|
fileeval $cfPath(scan)/scan.tcl
|
|
fileeval $cfPath(commands)/pulser.tcl
|
|
fileeval $cfPath(commands)/hvcommands.tcl
|
|
fileeval $cfPath(commands)/commands.tcl
|
|
fileeval $cfPath(anticollider)/anticollider.tcl
|
|
#fileeval $cfPath(environment)/robby_configuration.tcl
|
|
fileeval $cfPath(robots)/sct_pickandplace.tcl
|
|
fileeval $cfPath(robots)/sct_epson_pandp.tcl
|
|
source gumxml.tcl
|
|
|
|
|
|
##########################################################
|
|
# Current driver for Lakeshore temperature controllers #
|
|
##########################################################
|
|
# driverName shortName IP-address port LineTerminator Tolerance1 Tolerance2 optional_Verbose
|
|
# add_sct_ls340 tc1 ca5-[instname] 4001 "\r" 0.5 1.0
|
|
# add_sct_ls336 tc1 137.157.201.21 7777 "\r\n" 5.0 5.0
|
|
# add_sct_ls336 tc2 137.157.201.23 7777 "\r\n" 5.0 5.0
|
|
# add_sct_ls336 tc3 10.157.205.30 7777 "\r\n" 5.0 5.0
|
|
# add_sct_ls336 tc4 10.157.205.31 7777 "\r\n" 5.0 5.0
|
|
#::environment::temperature::add_west400 137.157.201.14
|
|
# ::environment::temperature::add_west400 10.157.205.24
|
|
#::robot::add_robby
|
|
# add_robot robby 137.157.201.26 6000
|
|
#add_robot rosie 137.157.201.26 6000
|
|
#add_oxford_mercury tc1 10.157.205.5 7020 2.0
|
|
#add_oxmag magnetic 10.157.205.3 55001
|
|
#
|
|
server_init
|
|
###########################################
|
|
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.
|
|
|
|
# You can add extra-configuration code in ../extraconfig.tcl
|