sics/site_ansto/instrument/config at 0266abbd94e557fddc1d86b82119da09f67358ee - sics

linse/sics

Files

Douglas Clowes 0266abbd94 Change the temperature factor from 10.0 to 20.0

This refelcts the firmware update to the RVA ROM removing the factor
of 2.0 for the temperature reading and setting

2013-12-16 13:36:35 +11:00

anticollider

SICS-606 Allow defining multiple motors and ranges to forbid moves.

2013-05-17 03:22:49 +10:00

commands

SICS-646: Restore histogram command to hdb tree.

2013-08-09 05:30:54 +10:00

counter

Set scan=1ms and scans per sample=10 on the counters when SICS starts up.

2013-04-10 17:03:30 +10:00

environment

Change the temperature factor from 10.0 to 20.0

2013-12-16 13:36:35 +11:00

hipadaba

Copied in-situ modifications from ics1-quokka.

2013-02-20 18:19:44 +11:00

hmm

SICS-684 Stop the 'ERROR: option fat_clock_scale n' messages when running the script_validator.

2013-10-29 09:14:41 +11:00

motors

Make sure that a posit motor transitions back to IDLE if the motor it depends on has been first driven directly.

2013-09-10 14:23:14 +10:00

nexus

Make sure that the rank of the histmem dataset is always equal to the rank of the data + 1

2013-10-28 15:33:41 +11:00

plc

sct_protek608.c

2012-11-15 17:00:29 +11:00

robots

revert "driving" and update ROTATE

2012-11-15 17:10:31 +11:00

scan

Make sure that scans only save scratch files if called with 'savetype nosave'

2013-10-15 02:56:43 +11:00

source

Report zero for reactor power and temperatures when using dummy reactor info.

2012-11-15 17:02:39 +11:00

load_setup.tcl

Load environment configuration file taipan_setup.txt if it exists.

2013-05-06 21:23:41 +10:00

README.TXT

pelican

2012-11-15 13:40:07 +11:00

README.TXT

This directory contains common configuration files shared by the instrument specific configurations.
How to add a new configuration section

  mkdir config/newcomp
Create the common config file, eg
  config/newcomp/newcomp_common.tcl

Create the instrument specific config file which sources the common config
  hrpd/config/newcomp/newcomp.tcl

Add the path for the common config file to the common config list
  hrpd/config/INSTCFCOMMON.TXT

DON'T FORGET TO ADD THE NEW FILES AND DIRECTORIES TO CVS