# $Revision: 1.13 $
# $Date: 2007-04-06 09:10:02 $
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
# Last revision by: $Author: ffr $

# Required by server_config.tcl 
VarMake Instrument Text Internal 
Instrument wombat 
Instrument lock

#START SERVER CONFIGURATION SECTION
source util/dmc2280/dmc2280_util.tcl
source sics_ports.tcl
source server_config.tcl
#END SERVER CONFIGURATION SECTION

########################################
# INSTRUMENT SPECIFIC CONFIGURATION

#set hmm_mode pulser
#set hmm_mode calibration
set hmm_mode normal

fileeval $cfPath(motors)/motor_configuration.tcl

########

fileeval $cfPath(counter)/counter.tcl
fileeval $cfPath(hmm)/hmm_configuration.tcl
fileeval $cfPath(nexus)/nxscripts.tcl
fileeval $cfPath(scan)/scan.tcl
source $cfPath(hipadaba)/hipadaba_configuration.tcl
source gumxml.tcl

MakeStateMon hmscan

VarMake detector_radius_mm Int User
detector_radius_mm 700.0
VarMake detector_angle_deg Float User
detector_angle_deg 120.0
VarMake deg_per_rad Float Internal
deg_per_rad 57.29577951308232
deg_per_rad lock
VarMake detector_angle_rad Float User
detector_angle_rad [expr [SplitReply [detector_angle_deg]]/[SplitReply [deg_per_rad]] ]
VarMake detector_active_height_mm Float User
detector_active_height_mm 200.0

VarMake crystal_type Text User
VarMake crystal_wavelength_A Float User

VarMake bmon_distance Float User

## Column number at beam centre
VarMake detector_zero_row Float User
detector_zero_row 255.5
## Row number at beam centre for a detector rotation of 0 degrees
VarMake detector_zero_col Float User
detector_zero_col [expr 480 * 8 - 1]
## Row offset for region of interest
VarMake detector_ROI_row_offset Float User
detector_ROI_row_offset 0
## Column offset for region of interest
VarMake detector_ROI_col_offset Float User
detector_ROI_col_offset 0

detector_type He-3 position sensitive detector
detector_type lock

detector_description 8 curved multiwire segments
detector_description lock

fileeval extraconfig.tcl

MakeRS232Controller plc_port 137.157.204.65 30001
MakeMultiChan plc_chan plc_port 0
MakeSafetyPLC plc plc_chan 0