# Author: Ferdi Franceschini (ffr@ansto.gov.au)

# Required by server_config.tcl
VarMake Instrument Text Internal
Instrument wombat
Instrument lock

#START SERVER CONFIGURATION SECTION
source util/dmc2280/dmc2280_util.tcl
source sics_ports.tcl
source server_config.tcl
MakeDrive
#END SERVER CONFIGURATION SECTION

########################################
# INSTRUMENT SPECIFIC CONFIGURATION

source $cfPath(hipadaba)/hipadaba_configuration.tcl
fileeval $cfPath(motors)/motor_configuration.tcl
#fileeval $cfPath(motors)/sct_oscmotor.tcl
source instrument_vars.tcl

fileeval $cfPath(source)/source.tcl
fileeval $cfPath(motors)/positmotor_configuration.tcl
fileeval $cfPath(plc)/plc.tcl
fileeval $cfPath(counter)/counter.tcl
fileeval $cfPath(environment)/sct_keithley_2700.tcl
fileeval $cfPath(environment)/sct_protek_common.tcl
#TODO Provide method for choosing environment controller
fileeval $cfPath(environment)/temperature/sct_eurotherm_2000.tcl
fileeval $cfPath(environment)/temperature/sct_lakeshore_336.tcl
fileeval $cfPath(environment)/temperature/sct_lakeshore_340.tcl
fileeval $cfPath(environment)/temperature/sct_lakeshore_370.tcl
fileeval $cfPath(environment)/temperature/sct_julabo_lh45.tcl
fileeval $cfPath(environment)/temperature/sct_qlink.tcl
fileeval $cfPath(environment)/temperature/west400.tcl
fileeval $cfPath(environment)/temperature/sct_oxford_mercury.tcl
fileeval $cfPath(environment)/magneticField/sct_oxford_labview.tcl
#fileeval $cfPath(environment)/he3/sct_he3.tcl
#fileeval $cfPath(environment)/he3/sct_hmp_power.tcl
fileeval $cfPath(environment)/magneticField/sct_green_magnet.tcl
fileeval $cfPath(hmm)/hmm_configuration.tcl
fileeval $cfPath(nexus)/nxscripts.tcl
fileeval $cfPath(scan)/scan.tcl
fileeval $cfPath(commands)/commands.tcl
fileeval $cfPath(commands)/pulser.tcl
fileeval $cfPath(commands)/hvcommands.tcl
fileeval $cfPath(commands)/eulerscan.tcl
fileeval $cfPath(anticollider)/anticollider.tcl
fileeval $cfPath(hmm)/hmm_rapid.tcl
source gumxml.tcl


# The Alice Thing
# Qlink : 9600, 8 data, 1 stop, No Parity, None Flow
# LS340 : 9600, 7 data, 1 stop, Odd Parity, None Flow
# Julabo: 9600, 7 data, 1 stop, Even Parity, RTS/CTS Flow
# add_qlink qlink 137.157.201.86 4004 5
# add_sct_ls340 tc1 137.157.201.86 4001 "\r" 5.0 5.0
# add_lh45 tc2 137.157.201.86 4003 1

# Eurotherm
# add_et2000 name IP PORT MODBUS_ADDR TOL
#  add_et2000 et2000 10.157.205.19 502 1 5

# Using a Keithley 2700 mulitimeter to read pressure
# add_k2700 pressure 137.157.201.86 4004 "\r"

# Lakeshore 370 Resistance Bridge
# add_lakeshore_370 ls370 137.157.201.86 4002 2.0


server_init
###########################################
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.

# You can add extra-configuration code in ../extraconfig.tcl