Ferdi Franceschini 2008-08-29 16:47 For instrument scientists only At the command line of your ics (instrument control server) computer type runsics stop This stops SICS, in preparation to make configuration changes. configsics This launches an application that will modify the SICS configuration for sample environment. Follow the instructions at the top of the screen Select [x] 12tmagnet: w to write and exit configsics runsics start This will restart SICS with the new sample environment configuration. from sct_oxford_labview.tcl oxfordsetfield n Set the magnetic field to n Tesla oxfordsetrate n Set the magnet field ramp rate to n Tesla / minute ??? check units oxfordsethtemp n Set the Heliox temperature to n K oxfordsetdtemp n Set the Dilution Insert temperature to n K oxfordseths ON/OFF Turn the heater switch ON/OFF ??? /sample/magnetic/field ??? /sample/magnetic/magneticFieldCurrent Magnet current (amps) /sample/magnetic/magneticFieldTesla Magnetic field (Tesla) /sample/magnetic/start_magnetic Start value for a magnetic field ramp (Tesla) /sample/magnetic/end_magnetic For a magnetic field ramp, this is the end value (Tesla) /sample/magnetic/Temp Temperature on main control sensor (K) /sample/magnetic/Temp_s1 Temperature on sensor 1 (K) /sample/magnetic/Temp_s2 Temperature on sensor 2 (K) /sample/magnetic/Temp_s3 Temperature on sensor 3 (K) /sample/magnetic/start_temperature_s1 Start value for a temperature ramp using sensor 1 (K) /sample/magnetic/end_temperature_s1 End value for a temperature ramp using sensor 1 (K) /sample/magnetic/start_temperature_s2 Start value for a temperature ramp using sensor 2 (K) /sample/magnetic/end_temperature_s2 End value for a temperature ramp using sensor 2 (K) /sample/magnetic/start_temperature_s3 Start value for a temperature ramp using sensor 3 (K) /sample/magnetic/end_temperature_s3 End value for a temperature ramp using sensor 3 (K) /sample/magnetic/fieldSetPoint Setpoint for magnetic field (Tesla) /sample/magnetic/fieldSetRate Magnetic field rate (Tesla/min) /sample/magnetic/HelioxTempSetPoint Setpoint for Heliox (K) /sample/magnetic/HelioxTempReading Temperature reading for Heliox (K) /sample/magnetic/DilutTempSetPoint Setpoint for Dilution Insert (K) /sample/magnetic/DilutTempReading Temperature reading for Dilution Insert (K) /sample/magnetic/set_rate Magnetic field rate (Tesla/min) /sample/magnetic/set_magneticField Setpoint for magnetic field (Tesla) /sample/magnetic/set_DiluxTemp Setpoint for Dilution Insert (K) /sample/magnetic/set_HelioxTemp Setpoint for Heliox (K) /sample/magnetic/set_HeaterSwitch Turn heater switch ON and OFF No additional descriptions available at this time. Alerts the user to known operational problems What to do if things go wrong