# Author: Ferdi Franceschini (ffr@ansto.gov.au)

# Required by server_config.tcl 
VarMake Instrument Text Internal
Instrument quokka 
Instrument lock

#START SERVER CONFIGURATION SECTION
source util/dmc2280/dmc2280_util.tcl
source sics_ports.tcl
source server_config.tcl
#END SERVER CONFIGURATION SECTION

########################################
# INSTRUMENT SPECIFIC CONFIGURATION

fileeval $cfPath(motors)/motor_configuration.tcl


fileeval $cfPath(source)/source.tcl
source $cfPath(hipadaba)/hipadaba_configuration.tcl
fileeval $cfPath(motors)/positmotor_configuration.tcl
fileeval $cfPath(velsel)/velsel.tcl
fileeval $cfPath(parameters)/parameters.tcl
fileeval $cfPath(plc)/plc.tcl
fileeval $cfPath(optics)/optics.tcl
fileeval $cfPath(counter)/counter.tcl
fileeval $cfPath(environment)/temperature/lakeshore340.tcl
fileeval $cfPath(environment)/temperature/sct_lakeshore_3xx.tcl
fileeval $cfPath(hmm)/hmm_configuration.tcl
fileeval $cfPath(nexus)/nxscripts.tcl
fileeval $cfPath(hmm)/detector.tcl
fileeval $cfPath(scan)/scan.tcl
fileeval $cfPath(commands)/commands.tcl
fileeval $cfPath(anticollider)/anticollider.tcl
fileeval $cfPath(environment)/temperature/sct_julabo_lh45.tcl
source gumxml.tcl

::utility::mkVar ::anticollider::protect_detector text manager protect_detector false detector true false
::anticollider::protect_detector "true"
proc select_environment_controller {envtemp} {
if [ catch {
puts "selecting $envtemp for environment control"
switch $envtemp {
  "lh45" {
    add_lh45 tc1 ca5-quokka 4003 1
  }
  "rhqc" {
    puts "Configuring RHQC"
    ::environment::temperature::add_ls340 tc1 1
    tc1 controlsensor sensorB
    puts "Added tc1 with [tc1 controlsensor]"
    ::environment::temperature::add_ls340 tc2 2
    tc2 controlsensor sensorD
    puts "Added tc2 with [tc2 controlsensor]"
  }
  "11TMagnet" {
    puts "Configuring 11TMagnet"
    ::environment::temperature::add_ls340 tc1 1
    tc1 controlsensor sensorA
  }
  default {
    clientput "No temperature controller configured"
  }
}
} msg ] {
  puts "Failed to configure $envtemp: $msg"
}
}

server_init
###########################################
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.

# You can add extra-configuration code in ../extraconfig.tcl