# Author: Ferdi Franceschini (ffr@ansto.gov.au)

# Required by server_config.tcl 
VarMake Instrument Text Internal
Instrument wombat 
Instrument lock

#START SERVER CONFIGURATION SECTION
source util/dmc2280/dmc2280_util.tcl
source sics_ports.tcl
source server_config.tcl
#END SERVER CONFIGURATION SECTION

########################################
# INSTRUMENT SPECIFIC CONFIGURATION

fileeval $cfPath(motors)/motor_configuration.tcl
source instrument_vars.tcl

fileeval $cfPath(source)/source.tcl
source $cfPath(hipadaba)/hipadaba_configuration.tcl
fileeval $cfPath(motors)/positmotor_configuration.tcl
fileeval $cfPath(plc)/plc.tcl
fileeval $cfPath(counter)/counter.tcl
#TODO Provide method for choosing environment controller
fileeval $cfPath(environment)/temperature/lakeshore340.tcl
fileeval $cfPath(environment)/temperature/sct_lakeshore_3xx.tcl
fileeval $cfPath(environment)/temperature/west400.tcl
fileeval $cfPath(hmm)/hmm_configuration.tcl
fileeval $cfPath(nexus)/nxscripts.tcl
fileeval $cfPath(scan)/scan.tcl
fileeval $cfPath(commands)/commands.tcl
fileeval $cfPath(anticollider)/anticollider.tcl
fileeval $cfPath(hmm)/hmm_rapid.tcl
source gumxml.tcl


# Drivers for Lakeshore Temperature Controller
# old Lakeshore driver (c-code)
# ::environment::temperature::add_ls340 tc1 1
# ::environment::temperature::add_ls340 tc2 2

# New Lakeshore series driver for models 340 and 336 - (tcl-code, version 20090824) - beta status
# driverName shortName  IP-address portOnMoxa temperatureTolerance LakeshoreModel
# ffr 2009-11-11: NOTE I've added a line terminator argument to the ls3xx setup.
#                 You need to set the line termintator to either "\r\n" for CRLF or "\r" for CR 
#  add_ls3xx tc1 137.157.201.85 7777 "\r\n" 0.5 336
# add_ls3xx tc2 137.157.201.85 4002 "\r\n" 0.5 340


#::environment::temperature::add_west400  
server_init
###########################################
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.

# You can add extra-configuration code in ../extraconfig.tcl