# $Revision: 1.31 $
# $Date: 2009-11-24 22:56:46 $
# Author: Ferdi Franceschini (ffr@ansto.gov.au)
# Last revision by: $Author: ffr $

# Required by server_config.tcl 
VarMake Instrument Text Internal
Instrument wombat 
Instrument lock

#START SERVER CONFIGURATION SECTION
source util/dmc2280/dmc2280_util.tcl
source sics_ports.tcl
source server_config.tcl
#END SERVER CONFIGURATION SECTION

########################################
# INSTRUMENT SPECIFIC CONFIGURATION

fileeval $cfPath(motors)/motor_configuration.tcl

source instrument_vars.tcl

fileeval $cfPath(source)/source.tcl
source $cfPath(hipadaba)/hipadaba_configuration.tcl
fileeval $cfPath(motors)/positmotor_configuration.tcl
fileeval $cfPath(plc)/plc.tcl
fileeval $cfPath(counter)/counter.tcl
#TODO Provide method for choosing environment controller
fileeval $cfPath(environment)/temperature/lakeshore340.tcl
fileeval $cfPath(environment)/temperature/sct_lakeshore_3xx.tcl
fileeval $cfPath(environment)/temperature/west400.tcl
fileeval $cfPath(hmm)/hmm_configuration.tcl
fileeval $cfPath(nexus)/nxscripts.tcl
fileeval $cfPath(scan)/scan.tcl
fileeval $cfPath(commands)/commands.tcl
fileeval $cfPath(anticollider)/anticollider.tcl
fileeval $cfPath(hmm)/hmm_rapid.tcl
source gumxml.tcl

::environment::temperature::add_ls340 tc1 1
::environment::temperature::add_ls340 tc2 2
#::environment::temperature::add_west400
server_init
###########################################
# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.

# You can add extra-configuration code in ../extraconfig.tcl